China nitrogen booster pump factory 1000 Bar

Description

 The gas booster equipment uses pure compressed air as the driving power source, gas booster pump as the pressure source, hydrogen, nitrogen, oxygen, helium, N2O, argon, CO2 and other gases as the pressurized medium. The output pressure is proportional to the driving gas pressure.

By adjusting the pressure of the driving gas source, the corresponding pressure of the pressurized gas can be obtained. When the pressure of the driving gas source is balanced with that of the pressurized gas, the pneumatic booster pump will be automatically stops and the output gas pressure is stabilized at the preset pressure. Therefore, it has the features of explosion-proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.

To operate this system, the drive gas from the air compressor is required to start the Terek booster pump. The pressure of the drive gas can be adjusted by valves and pressure gauges, and the output gas pressure can be adjusted.

The expected working pressure can be achieved by adjusting the pressure of the drive inlet. When the driving air pressure and the output pressure are balance, the pump stops filling pressure and the output pressure remains at the preset value.

gas booster pump uses compressed air to drive large area end piston to small area end to get high pressure gas output. It can be used for compressed air and other gas. The output pressure can be adjusted by inlet valve. The output parts can ensure gas is not contaminated. Automatic pressure maintaining. Driven by gas, No spark or Flame and No generating heat. It can be used in dangerous places.

These gas booster pump offer a flexible and efficient source for delivering high pressure gases.

1.Oxygen or High Purity cleaning: Our booster are noted for their cleaniness and can handle pure gases such as

oxygen without risk of any contamination.We will use customized lubricants for oxygen and also clean it with ultrosonice cleaner

2. High Flow rates at High pressure: When High flow rates at high pressure are needed ,the booster

can charge a receiver to an even higher pressure level ,thus storing a volume of gas aviable for rapid release at a constant

pressure through a pressure reducing valve

3.Cost savings:Most Industrial gases are commonly delivered at pressure of 2000-2600 Psi in steel cylinders .If the

Gas is to be used well bellow the supply pressure ,the pressurized supply is easily piped and controlled to the point of use