Home Companies Hanlin Industrial Machinery Co., Ltd

JX Series Metering Centrifugal Slurry Pump Plunger Type

Active Member

Contact Us

[China]

Address: 617,618,3F,Ever Grande International Plaza,745 Qutang Road,Changsha 410007,Hunan,China

Contact name:Heather

Hanlin Industrial Machinery Co., Ltd

JX Series Metering Centrifugal Slurry Pump Plunger Type

Country/Region	china
City & Province	changsha hunan
Categories	Pumps

Product Details

JX Series Plunger-Type Metering Pump, Centrifugal Pump

Main Performance Parameters

Max flow rate: 940L/h
Max discharge pressure: 50Mpa
Turndown ratio 10:1, steady-state accuracy ± 1%
Max suction lift: 2.5m water column
Medium temperature: -10℃--100℃
The highest ambient temperature: +40C, the highest elevation: 1000m

Major Features

Hard and compact design, small pump head, and optimized connection.
Plunder contacts medium directly with high volumetric efficiency. The transmission loss is lower at high pressure.
Variable eccentric structural adjustment ensures smooth fluctuations in flow pulsation; new machine enables the result more accurate and reasonable.
It is suitable for conveying non-solid particles media, high viscosity media, in high pressure environment; It is not recommended for corrosive pulp and flammable, explosive, dangerous chemicals!
Adopt graphite fiber with superior sealing performance and long service life.

Control Mode

Power supply: 380V/220V-50Hz/60Hz/three-phase/single-phase
Variable frequency controller receives the external control signal and adjusts the stroke speed, input signal: 4-20 mA analog signal
Motor controller determines three-phase motor by "on/off" mode, adjusts the output flow

Main Applications

It is widely used infields such as chemical, petrochemical, electricity and metallurgy etc.In particular,it is very popular in fields with high viscosity, high pressure and high temperature.

Main Components of the Fluid End

Fluid End	Pump Head	Valve body,valve seat	Valve ball	Plunger	Tamping	Seal ring
304SS	304SS	304SS	304SS/Zirconia	304+Ceramic	Fluororubber	Fluororubber/PTFE
316SS	316SS	316SS	304SS/Zirconia	316+Ceramis	Fluororubber	Fluororubber/PTFE

Flow/Pressure

Code	Max flow (L/h)	Max pressure (Mpa)	Plunger diamater (mm)	Stroke frequency (min-1)	Stroke length (mm)	Motor power (kW)
JX940/0.9 JX940/0.7 JX940/0.5	940	0.9 0.7 0.5	90	130	20	1.5 1.1 0.75
JX940/0.9 JX940/0.7 JX940/0.5	940	0.9 0.7 0.5	90			1.5 1.1 0.75
JX840/1.1 JX840/0.8 JX840/0.5	840	1.1 0.8 0.5	85			1.5 1.1 0.75
JX740/1.2 JX740/0.9 JX740/0.6	740	1.2 0.9 0.6	80.0			1.5 1.1 0.75
JX740/1.2 JX740/0.9 JX740/0.6	740	1.2 0.9 0.6	80.0			1.5 1.1 0.75
JX650/1.4 JX650/1.0 JX650/0.7	650	1.4 1.0 0.7	75			1.5 1.1 0.75
JX570/1.6 JX570/1.1 JX570/0.8	570	1.6 1.1 0.8	70.0			1.5 1.1 0.75


JX490/1.8 JX490/1.3 JX490/0.9	490	1.8 1.3 0.9	65			1.5 1.1 0.75
JX410/2.1 JX410/1.6 JX410/1.1	410	2.1 1.6 1.1	60			1.5 1.1 0.75
JX360/2.4 JX360/1.8 JX360/1.2	360	2.4 1.8 1.2	56			1.5 1.1 0.75
JX280/3.1 JX280/2.2 JX280/1.5	280	3.1 2.2 1.5	50			1.5 1.1 0.75
JX230/3.8 JX230/2.8 JX230/1.9	230	3.8 2.0 1.9	45			1.5 1.1 0.75
JX180/4.8 JX180/3.5 JX180/2.4	180	4.8 3.5 2.4	40			1.5 1.1 0.75
JX140/6.2 JX140/4.6 JX140/3.1	140	6.2 4.6 3.1	35.0			1.5 1.1 0.75
JX140/6.2 JX140/4.6 JX140/3.1	140	6.2 4.6 3.1	35.0			1.5 1.1 0.75
JX100/8.5 JX100/6.2 JX100/4.2	100	8.5 6.2 4.2	30			1.5 1.1 0.75
JX100/8.5 JX100/6.2 JX100/4.2	100	8.5 6.2 4.2	30			1.5 1.1 0.75
JX70/12.0 JX70/8.8 JX70/6.0	70	12.0 8.8 6.0	25			1.5 1.1 0.75
JX70/12.0 JX70/8.8 JX70/6.0	70	12.0 8.8 6.0	25			1.5 1.1 0.75
JX55/15.8 JX55/11.7 JX55/8.0	55	15.8 11.7 8.0	22			1.5 1.1 0.75
JX55/15.8 JX55/11.7 JX55/8.0	55	15.8 11.7 8.0	22			1.5 1.1 0.75
JX45/19.0 JX45/13.9 JX45/9.5	45	19.0 13.9 9.5	20			1.5 1.1 0.75
JX35/23.5 JX35/17.0 JX35/12.0	35	23.5 17.0 12.0	18			1.5 1.1 0.75
JX25/34.0 JX25/25.0 JX25/17.0	25	34.0 25.0 17.0	15			1.5 1.1 0.75
JX15/50.0 JX15/36.0 JX15/25.0	15	50.0 36.0 25.0	12			1.5 1.1 0.75
JX10/50.0 JX10/36.0 JX10/25.0	10	50.0 36.0 25.0	10			1.5 1.1 0.75
JX10/50.0 JX10/36.0 JX10/25.0	10	50.0 36.0 25.0	10			1.5 1.1 0.75

Fluid End

Code	Material
S	304SS
L	316SS

Interface

Code	Description	JX10-70	JX100-410	JX490-940
P	NPT thread	1/2''M	1/2''F	1''M
F	Flange interface	DN15	DN20	DN25
K	Tube fittings	DN15	----	----
X	Special interface	Please consult Hanlin Industrial

Note: the red parameters are standard configuration.

Electric Motor

Code	Description
1	Three-phase motor 220/380V, 50Hz,1440rpm, IP55/F
2	Single-phase motor 220V, 50Hz, 1440rpm, IP55/F
3	Three-phase explosion-proof motor 380V, 50Hz, 1440rpm, d IP55/F, dHBT4
4	Variable-frequency three-phase motor 220/380V, 50Hz, 4, 1440rpm, IP55/F, IC416
5	The motor is not provided with the pump, Retain the IEC interface
6	Consult Hanlin Indastrial for other motors

When selectingthe variable-frequency motor, its power should be at greater level.

JX Series Dimensions

Hot Products

Non Clogging 590r/Min Centrifugal Slurry Pump Non Clogging 350ZBD-850

350ZBD-850 Slag Slurry Pump Besides the wide passage, non-clogging and anti-corrosion of vapor is ...

Industrial 459kw Hydraulic Sludge Pump Anti Corroison 350ZBG(P)-1050

350ZBG(P)-1050 Slag Slurry Pump It is engineered in ways of direct connection drive, thus resulting ...

200kw 2200.0M3/H Centrifugal Slurry Pump Submersible 350ZBD-740

350ZBD-740 Slag Slurry Pump The adoption of metric bearing with oil lubrication, reasonable ...

820r/Min Centrifugal Slurry Pump , D125mm Cement Slurry Pump 125NJ-740

125NJ-740 Thick Slurry Pump • Adopt the latest modern design theory and optimization design method ...

JX Series Metering Centrifugal Slurry Pump Plunger Type

JX Series Plunger-Type Metering Pump, Centrifugal Pump Main Performance Parameters Max flow rate: ...

Anti Rust Heavy Duty Sludge Pump

250NJ-740 Thick Slurry Pump • The pump mainly uses direct transmission mode, with high transmission ...

Related Products