|
[China]
Trade Verify
Address: Xinhua District, Cangzhou City, Hebei Province, China
Contact name:Peter
Hebei Pantu Machinery Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
70 Mpa 10000 Psi Double Ram Bop 7 1/16 Inch Well Drilling
Introduction of Double Ram Bop
Double Ram Bop is mainly used for well drilling, and their side doors are equipped with hinge seats,. which enables opening side doors and replacing rams very conveniently. Double Ram Bop is more cast-effective well drilling and control equipment as your ideal alternative.
The shape of ram is planar square, and the housing body ia cast as a whole, easier to process and control manufacturing costs, simple to maintain, applicable to a wide range, built-in oil circuit, safe and reliable seal.
Double Ram Bop Paremeter
| Model | Gals to Open (1 set) | Gals to Close (1 set) | Closing Ratio | Assembly Dimension (in) | Approx Weight(lb) | ||||||
| Length (L) | Width (W) | Height (H) | |||||||||
| Flg×Flg | Std×Std | Flg×Std | Flg×Flg | Std×Std | Flg×Std | ||||||
| 4 1/16″-20,000psi(Single RS-FS) | 1.10 | 1.13 | 10.1 | 70.71 | 26.97 | 33.27 | 18.11 | 23.82 | 3491 | 3147 | 3319 |
| 4 1/16″-20,000psi(Double RS-FS) | 1.10 | 1.13 | 10.1 | 70.71 | 26.97 | 46.30 | 31.14 | 36.85 | 5742 | 5398 | 5570 |
| 7 1/16″-20,000psi(Single RS-FS) | 7.05 | 7.26 | 13.7 | 112.05 | 38.27 | 48.03 | 24.02 | 35.83 | 10891 | 8951 | 9921 |
| 7 1/16″-20,000psi(Double RS-FS) | 7.05 | 7.26 | 13.7 | 112.05 | 38.27 | 70.87 | 47.24 | 59.06 | 19826 | 17886 | 18812 |
| 11″-20,000psi(Single RS-FS) | 42.90 | 44.8 | 13.2 | 137.40 | 47.87 | 62.60 | 32.68 | 47.64 | 24030 | 19335 | 21682 |
| 11″-20,000psi(Double RS-FS) | 42.9 | 44.8 | 13.2 | 137.40 | 47.87 | 90.55 | 60.63 | 75.59 | 41987 | 37291 | 39639 |
| 18 3/4″-20,000psi(Double RS-FS) | 122 | 133 | 10.6 | 183.46 | 66.69 | / | / | 94.13 | / | / | 87083 |
Double Ram Bop Feature
1) Shape Generally, the BOP body is similar to a square, in the middle there is vertical bore through which the pipes
can pass and the ram cavities in which the ram move in the
horizontal direction.
2)Connection types The three connection types are studded, flange,
clamped top and bottom connections. The sizes of flanges, bolts, clamps and ring grooves all conform to API
standards.
