Home Companies Hebei Pantu Machinery Equipment Co., Ltd

Well Control Bop Control Unit Remote Control Reliably And Safely

Contact Us

[China]

Trade Verify

Address: Xinhua District, Cangzhou City, Hebei Province, China

Contact name:Peter

Hebei Pantu Machinery Equipment Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Well Control Bop Control Unit Remote Control Reliably And Safely

Country/Region	china
City & Province	cangzhou hebei

Product Details

Well Control Bop Control Unit Remote Control

The accumulator unit for BOP stacks is a very important piece of equipment that controls BOP stacks and gate valves controlled by hydraulic pressure, especially in drilling and workover operations. It is necessary to accurately operate and maintain the hydraulic control system. It consists of remote control system, driller’s panel, air cable (except electrical type), pipe rack (electrical warming system available for cold area), high-pressure manifold, protection room, etc.

Parameters

Item	Model	Number of Controlled Objects	Accumulator Sets			Effective Volume of Oil Reservoir (L)	Flow Rate of Pump		Motor Power (kW)	Working Pressure (MPa)
Item	Model	Number of Controlled Objects	Total Volume	(L)	Nominal Available Volume (L)	Effective Volume of Oil Reservoir (L)	Electric Pump (L/min)	Pneumatic Pump (ml/stroke)	Motor Power (kW)	Working Pressure (MPa)
1	FKQ240-3	3	40×6		120	560	20	165	11	21
2	FKQ320-4	4	40×8		160	650	20	165	11	21
3	FKQ320-5	5	40×8		160	650	20	165	11	21
4	FKQ400-5	5	40×10		200	900	30	165	15	21
5	FKQ400-6	6	40×10		200	900	30	165	15	21
6	FKQ480-5	5	40×12		240	1000	30	165	15	21
7	FKQ480-6	6	40×12		240	1000	30	165	15	21
8	FKQ640-6	6	40×16		320	1300	40	165×2	18.5	21
9	FKQ640-7	7	40×16		320	1300	40	165×2	18.5	21
10	FKQ800-7	7	40×20		400	1500	40	165×2	18.5	21
11	FKQ800-8	8	40×20		400	1600	40	165×2	18.5	21
12	FKQ960-6	6	80×12		480	1800	40	165×3	18.5	21
13	FKQ960-7	7	80×12		480	1800	40	165×3	18.5	21
14	FKQ960-8	8	80×12		480	1800	40	165×3	18.5	21
15	FKQ1280-8	8	80×16		640	2000	40×2	165×3	18.5×2	21
16	FKQ1280-9	9	80×16		640	2000	40×2	165×3	18.5×2	21
17	FKQ1280-10	10	80×16		640	2000	40×2	165×3	18.5×2	21
18	FKDQ480-5	6	40×12		240	1000	30	165	15	21
19	FKDQ480-6	6	40×12		240	1000	30	165	15	21
20	FKDQ640-6	6	40×16		320	1300	40	165×2	18.5	21
21	FKDQ640-7	7	40×16		320	1300	40	165×2	18.5	21
22	FKDQ800-7	7	40×20		400	1500	40	165×2	18.5	21
23	FKDQ800-8	8	40×20		400	1600	40	165×2	18.5	21
24	FKDQ960-7	7	80×12		480	1800	40	165×3	18.5	21
25	FKDQ960-8	8	80×12		480	1800	40	165×3	18.5	21
26	FKDQ1280-8	8	80×16		640	2000	40×2	165×3	18.5×2	21
27	FKDQ1280-9	9	80×16		640	2000	40×2	165×3	18.5×2	21
28	FKDQ1280-10	10	80×16		640	2000	40×2	165×3	18.5×2	21
29	FKD640-6	6	40×16		320	1300	40	165×2	18.5	21
30	FKD800-7	7	40×20		400	1500	40	165×2	18.5	21
31	FKD960-8	8	80×12		480	1800	40	165×3	18.5	21

Key Points of BOP Control System selection

To control BOP reliably and safely, oil & natural gas industry standards SY/T5053.2-2007 and APl Spec 16D should be followed when you choose and purchase a suitable product. Factors to be considered should at least be:

Relationship between liquid volume required for closing BOP stacks and liquid volume available from the control system
Requirements of pump system;
Whether it needs to meet the APl 16D standards;
Environmental adaptation;
Special requirements on the off-shore drilling platforms.

1 Options for controlled objects and accumulator available liquid volume

The accumulator group shall be configured so that the remaining pressure is greater than the maximum control pressure required

by the control object after closing all BOP and hydraulic valves.

Available volume from an accumulator group is recommended be 2 times greater than the required volume of closing BOP stacks.

2. Requirements of pump system

The main pumping unit shall be comprised of a minimum of two pump systems. The cumulative output capacity of the

pump systems shall be sufficient to charge the main accumulator system from precharge pressure to the system RWP within

15 minutes. With the loss of one pump system or one power system, the remaining pump system(s) shall have the capacity to

charge the main accumulator system from precharge pressure to the system RWP within 30 minutes.

With the accumulators isolated from service and with one pump system or one power system out of service, the remaining

pump system(s) shall have the capacity to close one annular BOP and open choke valve(s) within 2 minutes.

3. Whether it needs to meet the API 16D standards

If the customer wants to order an API Spec. 16D control system, and mark the API monogram, the customer need to obtain

a form named “configuration and parameters of the bop stacks for order an API Spec. 16D control system (land and surface)”

from Rongsheng sales department. After filling in the detailed technical parameters, the Rongsheng technical department will

carry out the selection calculation.

Note:
Q:The FKQ series uses hose bundle to connect the dillr's panel with the renole control pane ,the diler operating elemerti pneumatic rotar y valves,remotecontrol panel uses cylinder to drive the 4-way 3-position vave,tis series can choose pneumatic-manual o pneumatih motor drven pressure reguiating valves,

DQ: The FKDQ series uses signal cableto connect the trller's panel with the renote contro panel ,theaillr operating e lemen is touch soreen r l ctic butonremote control panel uses cylinder to drive the 4-way 3-position valve, with pneumatic motor driven pressure regulating valves.
D: The FKD series uses signal cableto connect the drllr's panel with the remote control panel,theotrlle operating elenent is touch screen o lectic buronremote control panel uses electromagnet to drive the 4-way 3-position valve, with electromotor driven pressure regulating valves.
lf the customer want to order an APl Spec. 16D control systen, and you need to mark the APl monogram on it you need to obitain a fom named“configurationand peramelers of the bop stacks for ovder an APl Spec. 16D control system jland and surace)”from Rongsheng sales department. Afitr flng in the deti ledtechnical parameters, the Rongsheng technical department will carry out the selection calculation.
The optional device:
All series can choose BOP heating units, to heating bop in extremely cold ernvironment,ena ble the bop tofuncion normlly the BOP shouls haveheatirg ucto)FKDQ & FKD series can choose wireless remote control function.