High Security Portable Steel Plate Electronic Key Lock Box

Stylish ultra-thin button, digital inside printing to prevent wear and fade, LED sound and light prompt, 3-8 bit electronic password setting.High performance PLC controller, stable and reliable.

3.Solid latch, safe and reliable.

Solid steel latch, thick width, anti - pry, anti - theft, safe and visible.

4.The whole plate hinge

The door plate is connected with the whole arc hinge of the rotating shaft, which is stable, beautiful and firm.

5.Exquisite knob for opening door

After installing the battery, no key is needed to open the door. After entering the complete password, directly turn the knob to open the door.

1.Double door with electronic password and key

The password can be changed randomly and freely, and the tactile and comfortable password button ensures the safety of property and creates a intimate and safe life atmosphere for you.

2.The cipher is anti - decipher, enter wrong three times auto - lock.

The lock core is durable and resistant to damage.Press wrong lock 3 times for 1 minute, press wrong lock 6 times for 10 minutes.

3.Emergency key

Emergency keyhole is usually hidden under the cover, forget the password or battery is out of power, you can replace the password to unlock.Play an emergency role.

4.Small and powerful

Can place jewelry, certificates, digital products and so on.

Open and close the safe

1. Enter factory password "159"(enter "di" every time and the yellow light will light up once), then press "A" or "B" key.Green light, turn the knob to open the door.

2.Close the door of the safe and turn the knob counterclockwise to the limit.

Setting and modifying the user password

3.In the open state, press the red button inside the door, the yellow light is on, please enter the user password you want to set within 30 seconds (3-8 digits), and then enter "A" or "B" to sound twice. If the yellow light flashes continuously and beeps continuously, it indicates that the password is set incorrectly.If you need to change your password, please follow the above steps to do it again!

1. First place the safe at the place where it is to be installed, mark the installation hole on the wall from the inside of the safe, then remove the safe and make two holes at the marked place.

2. Insert the expansion screw into the hole and take out the expansion screw from the expansion screw.

3. Return the safe to its original position and secure it from the screw rod inside.

Package & Delivery

Inspection System: Checking quality before packing.