|
[China]
Trade Verify
Address: Room 727, Guanlida Building, NO. 269 of Qianjin Road, Wenhui community, Xin'an street
Contact name:Huang
Shenzhen zk electric technology limited company |
|
Verified Suppliers
|
|
|
Solar Pump Project 380V 440V 11KW 15A 15HP MPPT VFD Solar Pump Inverter
ZK SG600 series solar water pump VFD/Inverter drives well all
kind of pump in solar pumping system:
MPPT efficiency more than 99%.
Drives well all kind of water pump in solar water pumping system. (AM and PMSM).
MPPT automatically tracking the DC bus voltage, can be set manuel too
Dry run protection and full water tank detect
Motor maximum current protection
Low input power protection
Lowest stop frequency protection
The PQ (power/flow) performance curve enables calculating the flow output from the pump
Digital control for fully automatic operation, data storage and protective functions
Intelligent power module (IPM) for the main circuit
LED display, contact us for LCD display
Low water probe sensor, and water level control function
Using Ambient temperature: -10 to +50˚C.
How to select the solar panels? Please refer the input voltage and power rate:
| Input voltage, power solar selection | ||||
| Pumps model | Inverte models | Vmp | Voc | Total Power of solar arrays |
| 110VAC pump | 1S (for 110V) | 130VDC | 156VDC | ≧ (1.3 to 2.0) rated power of Pump It is also depend on the quality of solar panels. The higher the power input, performance will be better |
| 220VAC pump | 2S (for 220V) | 310VDC | 372VDC | |
| 380VAC pump | 4T (for 380V) | 540VDC | 648VDC | |
Inverter Specifications:
| Model | 2S 220V Single phase e.g. SG600-2K2GB-2S | 2S 220V 3phase e.g. SG600-2K2GB-2S | 4T 380/440V 3phase e.g. SG600-2K2GB-4T |
| AC input voltage (Vac) | 220VAC ±15% | 380VAC ±15% | |
| Rated power (KW) | 0.75KW to 4KW | 0.75KW to 75KW | 0.75KW to 280KW |
| Max. DC input voltage (Vdc) | 440 | 440 | 800 |
| Start-up voltage (V) | 200 | 200 | 300 |
| Lowest working voltage (V) | 150 | 150 | 250 |
| Recommended DC input voltage range (V) | 200~400 | 260~400 | 486~750 |
| Recommended Vmp (V) | 310 | 310 | 540 |
| Recommended Voc (V) | 372 | 372 | 648 |
| Rated output voltage (V) | 220 1PHASE | 220 3PHASE | 380 3PHASE |
| Output frequency range (Hz) | 0~50/60hz (0-600HZ for PMSM) | ||
| Running mode | MPPT, CVT, VF | ||
| MPPT | 99% | ||
| Protection function | Dry run, fulll tank detect, over current... more than 20 pro | ||
| Remote controller | GPRS remote controller is optional | ||
| Installation manner | Wall mounting /Rail mounting /Flange mounting | ||
| Environment temperature | -10~+50℃ | ||
| Altitude | Below 1000m, If above 1000m, derate 1% for every additional 100m. | ||
| Cooling manner | Fan cooling | ||
| Protection level | IP20; (IP54 isoptional) | ||
Model number selection:
| SN | Models | Rate current | Output voltage ( 3PH VAC) | Applicable for pumps | MPPT voltage (Recommend VDC) | |
| General type: 2S series 150 to 450 VDC or 200 to 240VAC input, Voc
450VDC/336VDC (90-450VDC input for 220V 2.2KW, can drives well the 96V/110V pmsm pump) | ||||||
| 1 | SG600-0K7GB-2S | 4A | 220V/240V | 0.75KW | 260 to 400 | |
| 2 | SG600-1K5GB-2S | 7A | 220V/240V | 1.5KW | 260 to 400 | |
| 3 | SG600-2K2GB-2S | 10A | 220V/240V | 2.2KW | 260 to 400 | |
| 4 | SG600-4K0GB-2S | 16A | 220V/240V | 4.0KW | 260 to 400 | |
| SG600-**GB-2S | ** | 220V/240V | 5.5KW-75KW | 260 to 400 | ||
| General type: 4T series 250 to 900 VDC or 300 to 440VAC input, Voc 540VDC/616VDC | ||||||
| 5 | SG600-0K7GB-4T | 2.5A | 380V-440V | 0.75KW | 486 to 750 | |
| 6 | SG600-1K5GB-4T | 3.7A | 380V-440V | 1.5KW | 486 to 750 | |
| 7 | SG600-2K2GB-4T | 5A | 380V-440V | 2.2KW | 486 to 750 | |
| 8 | SG600-4K0GB-4T | 10A | 380V-440V | 4.0KW | 486 to 750 | |
| 9 | SG600--5K5GB-4T | 13A | 380V-440V | 5.5KW | 486 to 750 | |
| 10 | SG600-7K5GB-4T | 17A | 380V-440V | 7.5KW | 486 to 750 | |
| 11 | SG600-011GB-4T | 22A | 380V-440V | 11KW | 486 to 750 | |
| 12 | SG600-015GB-4T | 30A | 380V-440V | 15KW | 486 to 750 | |
| 13 | SG600-018GB-4T | 37A | 380V-440V | 18KW | 486 to 750 | |
| 14 | SG600-022GB-4T | 45A | 380V-440V | 22KW | 486 to 750 | |
| 15 | SG600-030GB-4T | 60A | 380V-440V | 30KW | 486 to 750 | |
| 16 | SG600-037GB-4T | 75A | 380V-440V | 37KW | 486 to 750 | |
| 17 | SG600-045GB-4T | 91A | 380V-440V | 45KW | 486 to 750 | |
| 18 | SG600-055GB-4T | 110A | 380V-440V | 55KW | 486 to 750 | |
| 19 | SG600-075GB-4T | 150A | 380V-440V | 75KW | 486 to 750 | |
| 20 | SG600-090GB-4T | 180A | 380V-440V | 90KW | 486 to 750 | |
| 21 | SG600-110GB-4T | 220A | 380V-440V | 110KW | 486 to 750 | |
| 22 | SG600-132GB-4T | 260A | 380V-440V | 132KW | 486 to 750 | |
| 23 | SG600-160GB-4T | 320A | 380V-440V | 160KW | 486 to 750 | |
| 24 | SG600-**GB-4T | ** | 380V-440V | 200-280KW | 486 to 750 | |
FAQ:
Q1 : What is the solar water pumping Inverter?
ZK Solar pump inverter drives well all kind of water pump including
single phase pump and PMSM in solar pumping system, solar DC and
Grid AC input. MPPT efficiency more than 99%.
Q2: What should be noticed when installing inverter?
Install the Inverter in a place where is well ventilate,cool,
dry and water-proof. long services life.
Q3: Do we need to set the parameter before using ?
Our inverter is AI intelligent working, can automatic tracking
the DC bus voltage.
You can set parameters if you want other functions like Dry run,
full tank detect.
Q4:Where is your factory located?
Our factory is located in Shenzhen, China, most welcome to visit
us. We can pick up you from the Shenzhen Airport or High
Speed Rail Station to our factory.
Q5:What is the supply capacity of your factory?
9000pcs inverters can be produced every month.
Export 7000-9000pcs inverters every month, to Thailand, India,
Pakistan, the Middle East like Syria, Saudi, Yemen, Turkey,
Egypt... All African and South America like Mexico, Brazil.
Sample be delivery around 3-5days, bulk order around
10-30 days.
Support OEM & ODM!
