Active Member
|
[China]
Address: Room 617, Guanlida Building, NO. 269 of Qianjin Road, Wenhui community, Xin'an street
Contact name:Frank
Shenzhen zk electric technology limited company |
|
|
380V 4KW 5HP 10A MPPT solar pump inverter VFD for submersible pump
ZK SG600 solar water pump Inverter VFD mainly features:
MPPT efficiency more than 99%.
Drives well all kind of AC pump including PMSM in solar water pumping system.
MPPT automatically tracking the DC bus voltage, can be set manuel too
Dry run protection and full water tank detect
Motor maximum current protection
Low input power protection
Lowest stop frequency protection
The PQ (power/flow) performance curve enables calculating the flow output from the pump
Digital control for fully automatic operation, data storage and protective functions
Intelligent power module (IPM) for the main circuit
LED display, LCD is avaliable.
Ambient temperature for using: -10 to +50˚C.
How to select the solar panels? Need enough voltage and power, and the Voltage can not big than input range.
| Input voltage, power solar selection | ||||
| Pumps model | Inverte models | Vmp | Voc | Total Power of solar arrays |
| 110VAC pump | 1S (for 110V) | 130VDC | 156VDC | ≧ (1.3 to 2.0) rated power of Pump It is also depend on the quality of solar panels. The higher the power input, performance will be better |
| 220VAC pump | 2S (for 220V) | 310VDC | 372VDC | |
| 380VAC pump | 4T (for 380V) | 540VDC | 648VDC | |
Data sheet:
| Model | 2S 220V Single phase e.g. SG600-2K2GB-2S | 2S 220V 3phase e.g. SG600-2K2GB-2S | 4T 380/440V 3phase e.g. SG600-2K2GB-4T |
| AC input voltage (Vac) | 220VAC ±15% | 380VAC ±15% | |
| Rated power (KW) | 0.75KW to 4KW | 0.75KW to 75KW | 0.75KW to 250KW |
| Max. DC input voltage (Vdc) | 440 | 440 | 800 |
| Start-up voltage (V) | 200 | 200 | 300 |
| Lowest working voltage (V) | 150 | 150 | 250 |
| Recommended DC input voltage range (V) | 200~400 | 200~400 | 300~750 |
| Recommended Vmp (V) | 310 | 310 | 540 |
| Recommended Voc (V) | 372 | 372 | 648 |
| Rated output voltage (V) | 220 1PHASE | 220 3PHASE | 380 3PHASE |
| Output frequency range (Hz) | 0~50/60hz (0-600HZ for PMSM) | ||
| Running mode | MPPT, CVT, VF | ||
| MPPT | 99% | ||
| Protection function | Dry run, fulll tank detect, over current... more than 20 pro | ||
| Remote controller | GPRS remote controller is optional | ||
| Installation manner | Wall mounting /Rail mounting /Flange mounting | ||
| Environment temperature | -10~+50℃ | ||
| Altitude | Below 1000m, If above 1000m, derate 1% for every additional 100m. | ||
| Cooling manner | Fan cooling | ||
| Protection level | IP20; (IP54 isoptional) | ||
Model number list and specificaions:
| SN | Models | Rate current | Output voltage ( 3PH VAC) | Applicable for pumps | MPPT voltage (Recommend VDC) | |
| General type: 2S series 150 to 450 VDC or 200 to 240VAC input, Voc
450VDC/336VDC (90-450VDC input for 220V 2.2KW, can drives well the 96V/110V pmsm pump) | ||||||
| 1 | SG600-0K7GB-2S | 4A | 220V/240V | 0.75KW | 260 to 400 | |
| 2 | SG600-1K5GB-2S | 7A | 220V/240V | 1.5KW | 260 to 400 | |
| 3 | SG600-2K2GB-2S | 10A | 220V/240V | 2.2KW | 260 to 400 | |
| 4 | SG600-4K0GB-2S | 16A | 220V/240V | 4.0KW | 260 to 400 | |
| ** | SG600-**GB-2S | ** | 220V/240V | 5.5KW-75KW | 260 to 400 | |
| General type: 4T series 250 to 800 (900) VDC or 300 to 440VAC input, Voc 540VDC/616VDC | ||||||
| 5 | SG600-0K7GB-4T | 2.5A | 380V-440V | 0.75KW | 486 to 750 | |
| 6 | SG600-1K5GB-4T | 3.7A | 380V-440V | 1.5KW | 486 to 750 | |
| 7 | SG600-2K2GB-4T | 5A | 380V-440V | 2.2KW | 486 to 750 | |
| 8 | SG600-4K0GB-4T | 10A | 380V-440V | 4.0KW | 486 to 750 | |
| 9 | SG600-5K5GB-4T | 13A | 380V-440V | 5.5KW | 486 to 750 | |
| 10 | SG600-7K5GB-4T | 17A | 380V-440V | 7.5KW | 486 to 750 | |
| 11 | SG600-011GB-4T | 22A | 380V-440V | 11KW | 486 to 750 | |
| 12 | SG600-015GB-4T | 30A | 380V-440V | 15KW | 486 to 750 | |
| 13 | SG600-018GB-4T | 37A | 380V-440V | 18KW | 486 to 750 | |
| 14 | SG600-022GB-4T | 45A | 380V-440V | 22KW | 486 to 750 | |
| 15 | SG600-030GB-4T | 60A | 380V-440V | 30KW | 486 to 750 | |
| 16 | SG600-037GB-4T | 75A | 380V-440V | 37KW | 486 to 750 | |
| 17 | SG600-045GB-4T | 91A | 380V-440V | 45KW | 486 to 750 | |
| 18 | SG600-055GB-4T | 110A | 380V-440V | 55KW | 486 to 750 | |
| 19 | SG600-075GB-4T | 150A | 380V-440V | 75KW | 486 to 750 | |
| ** | SG600-**GB-4T | ** | 380V-440V | 200-280KW |
486 to 750 | |
ZK solar pump inverte MPPT efficiency more than 99%. Solar DC and
Grid AC input.
All with 18 months warranty and technical support any time.
FAQ:
Q1 : What is the solar water pumping Inverter?
ZK Solar pump inverter drives well all kind of water pump including
single phase pump and PMSM in solar pumping system, solar DC and
Grid AC input. MPPT efficiency more than 99%.
Q2: How to select the solar pump inverter?
Inverter rated power and current must same or bigger than pump's
current and power.
Q3: Do we need to set the parameter before using ?
Our inverter is AI intelligent working, can automatic tracking
the DC bus voltage.
You can set parameters if you want other functions like Dry run,
full tank detect.
Q4:Where is your factory located?
Our factory is located in Shenzhen, China, most welcome to visit
us. We can pick up you from the Shenzhen Airport or High
Speed Rail Station to our factory.
