Active Member
|
[China]
Address: Room 617, Guanlida Building, NO. 269 of Qianjin Road, Wenhui community, Xin'an street
Contact name:Frank
Shenzhen zk electric technology limited company |
|
|
220V 380V 3 Phase IP54 IP65 MPPT Solar Pump VFD
ZK SG600 series IP54 IP65 solar VFD mainly features:
1. MPPT efficiency more than 99%, fast response speed and stable.
2. Input power can be solar DC and Grid AC.
3. Dirves well all kind of water pump, including single phase pump.
4.The working voltage can automatic detect or manuel set.
5. Built in automatic sleep-wake up function.
6. Can auto start in the monrnin when sun enough if solar input.
7. Dry run protection and full water tank detect.
8. Lowest stop frequency protection.
9. More than 20 protection functions, protect motor well.
10. LED, LCD display is optional.
11. IP20, IP54, IP65 waterproof level.
How to select the solar panels for your solar pumping project? need enough voltage and power:
| Input voltage, power solar selection | ||||
| Pumps type | Inverte model | Vmp | Voc | Total Power of solar arrays |
| 110VAC pump | 1S (for 110V) | 130VDC | 156VDC | ≧ (1.3 to 2.0) rated power of Pump It is also depend on the quality of solar panels. The higher the power input, performance will be better |
| 220VAC pump | 2S (for 220V) | 310VDC | 372VDC | |
| 380VAC pump | 4T (for 380V) | 540VDC | 648VDC | |
Inverter Specifications:
| Recommended input VOC and Vmp ( VDC ) | VOC 184VDC, Vmp 155VDC for 1S Inverter and 110V AC pumps VOC 372VDC, Vmp 310VDC for 2S Inverter and 220V AC pumps VOC 648VDC, Vmp 540VDC for 4T Inverter and 380V AC pumps |
| Max DC voltage input | 150-450VDC input for 1S inverter 150-450VDC input for 2S inverter 250-800VCD inout for 4T inverter |
| Motor type | Control for permanent magnet synchronous motor and asynchronous motor pumps. 1 phase or 3 phase 220VAC pumps. |
| Rated output voltage | 1/3-Phase,220V. 3-phase, 220V/380V/460V |
| Output frequency range | 0~50/60HZ, PMSM can be 0-600HZ. |
| MPPT efficiency | 99.6%, more efficiency if use to drive PMSM pumps |
| Ambient temperature range | G-type for submersible pumps, 150% rated current for 60s, 180% rated current for 2s . P type for general pumps, 120% rated current for 60s, 150% rated current for 2s |
| Solar pump control special performance | MPPT ( maximum power point tracking), CVT (constant voltage tracking), auto/manual operation, dry run protection, low stop frequency protection, minimum power input, motor maximum current protection, flow calculating, energy generated calculating and water tank level detected |
| Protection function | Phase loss protection, phase short circuit protection, ground to phase circuit protection , input and output short circuit protection. Stall protection, lightning protection |
| Protection degree | IP20, Air force cooling |
| Running mode | MPPT or CVT |
| Altitude | Below 1000m; above 1000m, derated 1% for every additional 100m. |
Standard AC input backup circuit | CE, Design based on vector control drive S300 and S3200 series, more specification please refer to S300 or S320 vector control drive operation manual |
| Auto stop and auto restart | Control by external switch, float switch, Rs485 communication. It will auto start at morning when get enough power from sunlight, and stop at sunset when power is less from solar panel under terminals control mode |
| Technical specification when it used for speed and torque controlling of motor as FA-00 set to 0. | |
| voltage, frequency | Single phase 220V, 3 phase, 220V,380V, 660V and 1140V. Input Power 0.75kw to 37kw. |
| Control mode | 0: VF control ; 1: Vectorized VF control ; 2:Open loop vector control 1 ; 3: High performance open loop vector control 2 |
| Multiple-functions | PID Control, Carrier Frequency Adjustable, Current Limiter, Speed Search, Momentary Power Loss Restart,16 Step Speed (Max), 3-Wire connection, Slip Compensation, Frequency Jump, DC braking, Upper/Lower Frequency, Torque control, Compatible for PMSM and IM, built in RS485, counting, fault information checking, fully fault protection function, frequency combination reference. |
Inverter Model number list and specification:
| SN | Models | Rate current | Output voltage ( 3PH VAC) | Rated Power (KW) | MPPT voltage (Recommend VDC) | |
| General type: 2S series 150 to 450 VDC or 200 to 240VAC input, Voc
450VDC/336VDC (90-450VDC input for 220V 2.2KW, can drives well the 96V/110V pmsm pump) | ||||||
| 1 | SG600-0K7GB-2S | 4A | 220V/240V | 0.75KW | 260 to 400 | |
| 2 | SG600-1K5GB-2S | 7A | 220V/240V | 1.5KW | 260 to 400 | |
| 3 | SG600-2K2GB-2S | 10A | 220V/240V | 2.2KW | 260 to 400 | |
| 4 | SG600-4K0GB-2S | 16A | 220V/240V | 4.0KW | 260 to 400 | |
| SG600-**GB-2S | ** | 220V/240V | 5.5KW-75KW | 260 to 400 | ||
| General type: 4T series 250 to 900 VDC or 300 to 440VAC input, Voc 540VDC/616VDC | ||||||
| 5 | SG600-0K7GB-4T | 2.5A | 380V-440V | 0.75KW | 486 to 750 | |
| 6 | SG600-1K5GB-4T | 3.7A | 380V-440V | 1.5KW | 486 to 750 | |
| 7 | SG600-2K2GB-4T | 5A | 380V-440V | 2.2KW | 486 to 750 | |
| 8 | SG600-4K0GB-4T | 10A | 380V-440V | 4.0KW | 486 to 750 | |
| 9 | SG600-5K5GB-4T | 13A | 380V-440V | 5.5KW | 486 to 750 | |
| 10 | SG600-7K5GB-4T | 17A | 380V-440V | 7.5KW | 486 to 750 | |
| 11 | SG600-011GB-4T | 22A | 380V-440V | 11KW | 486 to 750 | |
| 12 | SG600-015GB-4T | 30A | 380V-440V | 15KW | 486 to 750 | |
| 13 | SG600-018GB-4T | 37A | 380V-440V | 18KW | 486 to 750 | |
| 14 | SG600-022GB-4T | 45A | 380V-440V | 22KW | 486 to 750 | |
| 15 | SG600-030GB-4T | 60A | 380V-440V | 30KW | 486 to 750 | |
| 16 | SG600-037GB-4T | 75A | 380V-440V | 37KW | 486 to 750 | |
| 17 | SG600-045GB-4T | 91A | 380V-440V | 45KW | 486 to 750 | |
| 18 | SG600-055GB-4T | 110A | 380V-440V | 55KW | 486 to 750 | |
| 19 | SG600-075GB-4T | 150A | 380V-440V | 75KW | 486 to 750 | |
| 20 | SG600-090GB-4T | 180A | 380V-440V | 90KW | 486 to 750 | |
| 21 | SG600-110GB-4T | 220A | 380V-440V | 110KW | 486 to 750 | |
| 22 | SG600-132GB-4T | 260A | 380V-440V | 132KW | 486 to 750 | |
| 23 | SG600-160GB-4T | 320A | 380V-440V | 160KW | 486 to 750 | |
| 24 | SG600-**GB-4T | ** | 380V-440V | 200-280KW | 486 to 750 | |
FAQ:
Q1 : What is the solar water pumping Inverter?
ZK Solar pump inverter drives well all kind of water pump including
single phase pump and PMSM in solar pumping system, solar DC and
Grid AC input. MPPT efficiency more than 99%.
Q2: How to select the solar pump inverter?
1. Contact us for suggestions.
2. Solar Pump Inverter rated current and power must same or big than pump rated current and power.
Q3: Do we need to set the parameter before using?
Our inverter is AI intelligent working, can automatic tracking
the DC bus voltage.
You can set parameters if you want other functions like Dry run,
full tank detect.
Q4: Where is your factory located?
Our factory is located in Bao'an Shenzhen, China, most welcome to
visit us. We can pick up you from the Shenzhen Airport
or High Speed Rail Station to our factory.
Q5: What is the your services?
All inverter with 18 months warranty and technical support anytime.
Welcome sample test.
Sample can be sent around 3-5days, bulk order around 10-30days.
Can customized, print your LOGO. OEM & ODM is avaliable.
