Active Member
|
[China]
Address: 16/F, Building 1, Nanshan iPark Chongwen, No.3370 Liuxian Avenue, Nanshan District, Shenzhen, China
Contact name:Marketing
Shenzhen Adtek Technology Co., Ltd. |
|
|
10G 40G MTP To MTP Cable OM4 Fiber Patch Cord Singlemode / Multimode Simplex
Product Description
ADTEK's MTP /MPO fiber optic patch cord series trunk cable solutions provide an efficient way to quickly install large quantities of cable while offering high flexibility in unplugging and reuse. They are especially suited for applications requiring high density, rapid deployment and high performance. These high performance factory tested assemblies come pre-terminated with 12 fiber MTP connectors and are available in customer specified lengths. 12/24/36/48/72/96/144 fibers are available. Users can also choose from ribbon, small round, or kai-loaded fiber optic cables depending on the project.
MPO/MTP is the high density of optical fiber pre-connect system
which is generally use in three areas.
1, The data center application with high density environment
2, The optical fiber to the building
3, The internal connector application in fiber equipment such as
Splitter, 0G / 100G SFP and SFP .
| Range of Mode | Single mode or Multi mode |
| Cable Type | Simplex, Duplex Ziocord. or Multi-cores |
| Connector Style | SC, FC, ST, LC, MTRJ, E2000, MU, MPO /MTP.etc |
| Polish or Ferrule Interface Type | PC, UPC |
| Cable Diameter | 0.9mm, 1.2mm, 1.6mm, 1.8mm,2.0mm, 3.0mm |
| Outer Jacket | PVC /LSZH/OFNP |
| Jacket Color | SM Yellow | OM1, OM2 Orange | OM3 Aqua | OM4 Aqua or Violet | OM5 Lemon Green |
| Durability | 500 cycles(0.2 dB max increase). 1000mate/de mate cycles |
| Operating Temp. | -20 ℃ to +70℃/+85℃ (armored) |
| Storage Temp. | -40℃ to +85℃ |
Features
* High Performance in IL & RL
* 4,8,12 and 24 fiber connector terminations and assemblies
* Designed for low loss and standard loss SM and MM applications
* Economical solution for mass-termination of fiber
* Suitable for MPO/MTP application
* Ruggedized round cable, oval cable and bare ribbon options
available
* Color coded housings available to differentiate fiber type,
polish type and/or connector grade
Item | Single mode | Multimoe | ||||
| PC | UPC | Other Mode | 62.5/125 | 50/125 OM1/2 | 50/125 OM3/4/5 | |
| Insert. Loss | 0.2dB Max. (0.15dB Elite) | 0.2dB Max. (0.15dB Elite) | ||||
| Return Loss | ≥50 dB | ≥55 dB | ≥60 dB | ≥35 dB | ||
| Insert. Loss/MTP or MPO | 0.7dB Max. (0.35 dB Elite.) | 0.5dB Max. (0.35dB Elite.) | ||||
| Return Loss s/MTP or MPO | ≥50dB | ≥55 dB | ≥60 dB | ≥20dB | ||
| Pull strength | ≥68N | ≥68N | ≥68N | ≥68N | ||
Associated Standards:
* Meets IEC Standard 61754-7& JIS C5982
* Structured cabling per TIA-568-C
* Parallel Optics
- Optical Internetworking Forum (OIF) Compliant
- Infiniband Compliant
* Infiniband
- 10G Fiber Channel Compliant
- 40G and 100G IEEE 802.3
- QSFP
| Type | Singlemode APC | Multimode | |||||||||||||
| Performance | Standard Loss | Low Loss | Standard Loss | Low Loss | |||||||||||
| Insertion loss | Maximum Value | ≤0.7dB | ≤0.35dB | ≤0.5dB | ≤0.35dB | ||||||||||
| Typical Value | 0.4dB | 0.2dB | 0.35dB | 0.2dB | |||||||||||
| Return Loss | ≥60 dB | ≥20dB | |||||||||||||
| Test Wavelength | 1310nm / 1550nm | 850nm / 1300nm | |||||||||||||
