Active Member
|
[China]
Address: Room 1103, HaoJing Building, No.108, Zhichun Road, Haidian District Beijing, China
Contact name:Wu
Beijing PDV Instrument Co., Ltd. |
|
|
Manual Adjustable Sliding Stage Optical Precision Horizontal Moving Platform
Manual adjustable sliding stage, the main material of the product is high-strength aluminum alloy, the surface is black oxide treated, and the screw drive is used, so the adjustment speed is fast. The side has scale and locking function, which has good locking effect and high stability. The table top and base are equipped with mounting holes with standard hole spacing, which is convenient for installation and combination, and can form a multi-dimensional adjustment frame or multi-dimensional adjustment with other series of products.
Types and characteristics of various guide rails of manual displacement stage:
1. Cross guide rail type. High precision, easy to adjust preloading.
2. Steel bar ball type. Light weight, smooth movement, light load, low price.
3. Linear ball type. High precision, high rigidity, thin type
4. Dovetail groove type. Large amount of movement, fast movement and high working frequency.
PT-SD4015-R manual linear stage Product parameters
Model Number | PT-SD4015-R |
Platform Size(mm) | 40×40 |
Thickness(mm) | 15 |
Driving mode | Screw lead 0.5MM |
Locking direction | right hand |
Travel(mm) | ±7.5 |
PT-SD4015-R manual linear stage Product dimension drawing
Precautions for application of manual displacement table
About Shaft Names
The horizontal direction is X axis and Y axis; The vertical direction is the Z axis; Rotate around Z axis( θ z )
load
It refers to the force that the platform can bear when the center of gravity is in the middle of the platform. If the platform is used with overload, it may not move smoothly. The center of gravity of the bearing object on the level too beautiful shall not exceed the plane to ensure the motion accuracy and life service of the platform. Please check the allowable load of the platform when the platform is in use, and do not overload the platform.
Recommended bearing volume
Not more than 1.5 times of the worktop
