IC694ALG392 GE Fanuc Brand New Original

IC694ALG392 GE Fanuc Brand New Original
 
Basis-Information
 
The PACSystems* 8-Channel Analog Current/Voltage Output module, ALG392, provides up to eight single-ended output channels with current loop outputs and/or voltage outputs. Each output channel can be set up using the configuration software for any of these ranges:

▪ 0 to +10 volts (unipolar)

▪ -10 to +10 volts (bipolar)

▪ 0 to 20 milliamps

▪ 4 to 20 milliamps

Each channel is capable of converting 15 to 16 bits (depending on the range selected) of binary data to an analog output. All eight channels are updated every 8 milliseconds. In current modes, the module reports an Open Wire fault to the CPU for each channel. The module can go to a known last state when system power is interrupted. As long as external power is applied to the module, each output will maintain its last value or reset to zero, as configured. This module can be installed in any I/O slot of an RX3i or Series 90-30 system.

Contact us for more details 

 
 
Related Parts

 
We Also Major
 
ALLEN BRADLEY (1756 1794, 1760, 1788 ControlLogix, 2711P panelview, SLC500 1747, 1746)
HONEYWELL (TDC2000 TDC3000, C200, C300, FSC, UCN boards, FTA boards)
FOXBORO (FBM203/204/217,FCP240/270)
ABB (DCS 800xA, S800 I/O module, Bailey INFI90, Advant OCS system, H&B Freelance 2000,etc)
BENTLY (3500,3300 series, monitor, I/O module, CPU, chassis, power supply, sensor, cable)
SCHNEIDER (Modicon Quantum 140 series: CPU processor, TSX Momentum)
BENTLEY NEVADA ( 3500 monitors, I/O module, 3300 monitors)