Bus Terminal Plug GE Fanuc IC693ACC307

Bus Terminal Plug GE Fanuc IC693ACC307 

The cable used should feature 7 twisted pairs, with an overall shield with drain wire (Belden 8107 or equivalent). The final rack on the I/O Bus should be terminated with an I/O Bus terminator plug, catalog number IC693ACC307.

The watchdog relay connector may now be wired to control external equipment, making sure not to exceed the specified contact ratings on the relay. Figure 3 lists the pinout of the watchdog relay terminal strip. The operation of the watchdog relay is controlled by the control software running on the personal computer. In general, it is energized whenever the I/O is being actively controlled. For further details regarding its operation, contact your control software vendor.

Th IC693PIF300 utilizes 8 contiguous PC/AT I/O ports in the range of 200H to 3FFH. If the factory default address of 300H to 307H conflicts with another interface card in the personal computer, the 6-position DIP switch (SW1) should be set to the desired address. Table 6 on Page 3 shows the possible settings for SW1.

Contact us for more details 

Manager: Unik You

Tel: +86 18030205725

Email: unik@cambia.cn

WhatsApp / Skype: +86 18030205725

Related Parts

We Also Handle 

ALLEN BRADLEY (1756 1794, 1760, 1788 ControlLogix, 2711P panelview, SLC500 1747, 1746)

HONEYWELL (TDC2000 TDC3000, C200, C300, FSC, UCN boards, FTA boards)

FOXBORO (FBM203/204/217,FCP240/270)

ABB (DCS 800xA, S800 I/O module, Bailey INFI90, Advant OCS system, H&B Freelance 2000,etc)

BENTLY (3500,3300 series, monitor, I/O module, CPU, chassis, power supply, sensor, cable)

SCHNEIDER (Modicon Quantum 140 series: CPU processor, TSX Momentum)

BENTLEY NEVADA ( 3500 monitors, I/O module, 3300 monitors)