|
[China]
Trade Verify
Address: Room 2304, building 4, gaojun science and technology innovation center, Ronggui town, Shunde District, Foshan City, Guangdong Province, China
Contact name:Beverly
WENGYUAN HENGHUI CHEMICAL COATING CO.,LTD. |
|
Verified Suppliers
|
|
|
Product Description:
MJ-COAT 2K epoxy primer is the basic material for the surface of the body steel plate, and it is the first layer in the combination coating of the body paint surface. Its main function is to provide adhesion for the coating and prevent the corrosion of the body steel plate. The primer generally does not have the ability to fill the surface defects of the car body, but it can make the exposed metal surface suitable for the adhesion of putty, primer and topcoat. The two are firmly combined. The correct choice of primer is very important, which is not only related to the anti-corrosion effect and adhesion of the primer, but also related to reducing the cost of spraying and convenient construction, as well as prolonging the durability of the paint film and meeting the quality requirements of automobile coating.
| Item No. | Product Name | Mixning ratio: (base paint : hardener : thinner) | volume of package can |
| 705 | 2K Epoxy Primer | 4:1:(1-1.2) | 1L,4L |
Optional Thinner.
| Item | Product name | Density | mixing ratio (2k coat : hardener:thinner) |
| EX10 | High Quality Fast Thinner | 0.85 | 4:1:(1-1.2) |
| EX20 | High Quality Standard Thinner | 0.85 | 4:1:(1-1.2) |
| EX30 | High Quality Slow Thinner | 0.85 | 4:1:(1-1.2) |
| EX50 | High Quality Extra Slow Thinner | 0.85 | 4:1:(1-1.2) |
| D5 | Extra Slow Thinner | 0.85 | 4:1:(1-1.2) |
| D3 | Fast Thinner | 0.85 | 4:1:(1-1.2) |
| D2 | Standard Thinner | 0.85 | 4:1:(1-1.2) |
| D1 | Slow Thinner | 0.85 | 4:1:(1-1.2) |
Note:
- As it is a highly flammable product, avoid open flames while working.
-As there may be layer separation in the container, mix thoroughly before use, but do not allow air bubbles to enter the paint during stirring.
-Be careful not to introduce air bubbles
-When applying the top coat, be sure to check the dilution before use.
-When there is no adhesion on the surface due to rain or snow, or when the repainting interval has elapsed after intermediate painting
-After sanding the intermediate surface, wipe with solvent before painting.
