Heavy Duty Sand Dredging Pump Single Stage High Chrome Cast Iron Material

Heavy Duty Barge Loading Dredging Sand Pump of abrasion resistant material high chrome cast iron

Pump Introduction

WS/WSG gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in mining, explosive sludge in metal smelting, dredging in dredger and course of rivers, and other fields. Type WS(G) pumps are of high-head ones.

Typical Applications

Tailings, sugar beet, dredging, slag granulation, cyclone feed, slag granulation, suction hopper dredging, barge loading, mill discharge, sand reclamation, booster pumping, sand waste, material transfer, etc.

Features

Construction of this pump is of single casing connected by means of clamp bans and wide wet-passage. The wet-parts are made of Ni-hard and high chromium abrasion–resistance alloys. The discharged direction of pump can be oriented in any direction of 360°.

This type of pump possesses the advantages of easy installing and operation, good performance of NPSH and abrasion-resistance.

Typies of driver: V belt driver, gearbox driver, elastic coupling driver, fluid couplings driver, frequency conversion driver, silicon controlled rectifier speed regulation etc.

Pump Notation

200WS-F:

200: Outlet diameter: mm

WS: Pump type: Gravel pump

F: Frame plate type

Construction Design

1. Shaft 2. Mount Base 3​Impeller Release Collar 4. Shaft Spacer 5. Seal Assembly 6. Adaptor Plate 7. Back Liner 8. Bowl 9. Clamp Ring 10. Door Clamp Plate 11. Door 12. Impeller 13. Flange