Description of 3 in 1 with cap elevator CIP cleaning fruit juice
bottling line
The bottle is conveyed to the three-in-one filling machine by the
bottle air conveying system through the bottle star wheel. The
rotary plate of the bottle washing machine is equipped with a
bottle clamp, which clamps the bottle mouth and turns 180° along a
guide rail to make the bottle mouth downward. In a specific area of
the bottle washing machine, the nozzle sprays bottle washing
disinfectant or water to rinse the inner wall of the bottle. After
the bottle is rinsed and drained, the bottle is clamped by the
bottle clamp and then turned over 180° along the guide rail, so
that the bottle mouth is upward. The washed bottles are exported
from the bottle washing machine through the bottle star wheel and
transferred to the filling machine. The bottle entering the filling
machine is held by the bottleneck pallet stuck to the mouth of the
bottle. The filling valve is lowered and raised through the valve
lifting mechanism under the action of the cam. Filling adopts
negative pressure filling method. After the filling valve descends
to contact the bottle mouth, it opens to complete the filling
process. After filling, the filling valve rises to leave the bottle
mouth, and the bottle enters the capping machine through the
bottleneck transition dial. The anti-rotation knife on the capping
machine jams the bottleneck to keep the bottle upright and prevent
it from rotating. The capping head keeps revolving and rotating on
the capping machine, and realizes the actions of capping, capping,
capping, and capping under the action of the cam to complete the
entire capping process. The finished bottles are conveyed from the
capping machine to the bottle conveying chain through the bottle
discharging dial wheel, and the three-in-one bottle filling machine
is conveyed by the conveying chain. The whole equipment is closed
by a window seal, the height of the window seal is higher than the
highest point of the equipment, proper passages are reserved at the
bottle inlet and outlet, and an exhaust trough is reserved at the
bottom of the window seal.
Equipment list of the whole RCGF8-8-3 0-2L bottle middle
temperature juice filling line
Items | Name of machine | Model | Size(mm) | Qty. |
1, 1500LPH flavor juice making line |
1.1 | Juice mixing tank | 1500L | ∮1120*2200 | 2set |
1.2 | Double filter | SL-2 | 800*350*800 | 1set |
1.3 | Homogenizer | JJ1.5-25 | 1130*850*1200 | 1set |
1.1.1 | Balance tank | 200L | ∮650*1700 | 1set |
1.4 | Electrical oil Coil UHT | 1500L/h | 2500*1200*1850 | 1set |
1.2.1 | Buffer tank | 500L | / | 1set |
1.5 | Heat exchanger | BR0.13-4 | 800*400*950 | 1set |
1.6 | Drink pump | / | / | 2set |
1.7 | Sus pipe-connection | DN25 | / | 1suit |
2, RCGF8-8-3 small bottle middle temperature juice filling line |
2.1 | Monoblock 3 in 1 washer-filler-capper unit | RCGF8-8-3 | 2100*1600*2100 | 1set |
2.1.1 | Air conveyor | FS-1 | 2.2m | 1set |
2.1.2 | Belt conveyor | SYS-1 | 4m | 1set |
2.1.3 | Light checker | DJ-1 | 800 | 1pc |
2.2 | Blow dryer | CG-1 | 1000*600*1800 | 1set |
2.3 | Single adhesive labeling machine for round bottles | T-751 | 1600*1200*1500 | 1set |
2.4 | Ink jet code printer | OH-338 | 347*220*100 | 1set |
2.5 | Semi-auto shrink packing machine | 5538+5040 | 3600*950*1680 | 1set |
2.9 | Extra conveyor | / | 1 linear | 1suit |
Caps conveyor road:
![](http://img.everychina.com/nimg/e4/6a/e167702d1f093bafbcf809384b11.jpg)