Description of 1500BPH split linear isobaric pressure salt soda carbonated drink filling line
Small bottle aerated beverage filling production line, carbonated
beverage filling machine, split linear filling machine
Main uses and characteristics of 1500BPH 12-12-1 linear type
Carbonated soft drink filling line:
1. Purpose: This machine is used for filling carbonated beverages
(beer, soda, sparkling wine, cola).
The maximum filling volume is 2000ml; the minimum filling volume is
240ml, which can be applied to glass bottles, polyester bottles
(PET), and cans.
The machine is equipped with a high-precision automatic equal
pressure filling valve. The filling speed is fast, the bottling
liquid level is highly stable, and the air pressure is constant. If
there is no bottle during the bottling process, the filling can be
automatically stopped. The liquid tank is equipped with an
automatic liquid level controller.
According to market demand, the low-cost and high-efficiency
transmission system of this machine adopts electromagnetic speed
regulation motor, which can be continuously variable.
Handling and installation of the machine:
1. The machine should be unpacked on site during installation.
Before unpacking, check whether the packaging is in good condition.
Do not use a sledgehammer when unpacking. After unpacking, first
check the accessories and spare parts according to the packing list
and make a record. .
2. The machine should be installed on a flat and firm foundation
surface. For example, the workshop floor is solid and flat, and no
additional foundation is needed.
When making the foundation, the power wire pipe should be buried.
The machine should be reliably grounded.
3. The machine should be placed steadily on the foundation, and the
machine foot bolts should be adjusted to keep it level. If the
machine is tilted, it will not only cause the jitter of the
machine, but also tilt the liquid level in the cylinder, making
filling work difficult.
4. The insulation of the motor and controller should be checked,
and the insulation resistance should be greater than 1.5 megohms.
5. Only after the machine is installed and the electrical system is
safe and reliable, can the test run be started.
Small bottle aerated beverage filling production line, carbonated
beverage filling machine, split linear filling machine
Equiment list of 1500BPH 12-12-1 linear type Carbonated soft
drink filling line:
| CARBONATED DRINK BOTTLING PART: |
| 1.1 | Rotary bottle washer | QS-12 | 1150*1100*1700 | 1set |
| 1.2 | Balance pressure filler | DG-12B | 1100*1050*1800 | 1set |
| 1.3 | Screw cap capping machine | FXZ-1 | 1000*850*2000 | 1set |
Parameters of 12 head washing machine:
Rising heads: 12 pcs Capacity: 0-3000BPH (each bottle rinsing time
4s)
Power: 0.92KW Dimension: 1050*950*1700mm
Weight: 700KG Applicable bottle: D∮50-100mm,H 50-350mm
Main Technological data of 12 heads balance pressure filling
machine:
| Model : | DG -12 |
| Production Capacity: | 1000-2000b/h |
| Bottle /standard: | Glass bottle , PET bottle , Pop-top can |
| Filling Pressure: | 0.2-0.3Mpa |
| Filling Temperature | 2-6 ℃ |
| Power: | 1.1kw |
| Overall Dimensions: | 1100×1050×1800 mm |
| Weight : | 1000kg |
