1500BPH Glass Bottle Crown Cap Divided Carbonated Drink Filling Line

Principle of 12 head Twice vacuum Isobaric Beer filler:

This filler is developed on the basis of digesting and absorbing advanced technology introducing from abroad and is with international advanced level. It is mainly used for filling beer. It is advanced in construction, steadily in performance, safe in operation, easy in maintenance high in production efficiency, and the speed can be regulated infinitively. The filler is the ideal choice for drink factories of small and middle size.

The bottles will be taken into filler by conveyor, the dia plate will turn each bottle to be put on standing pole, with driven energy of motor, the standing pole will go up and down as main axis.

on the way bottles go up, The vacuum button on the liquid tank are turned on by the gear;

At that time the air exhauster of the machine start the working, it exhaust all the air inside the glass bottles, to creat the vacuum situation insde the glass bottles;

The NanQing valves on the liquid tank can be turned on after the exhaust for bottle finished, at that time, the filling heads turn on for beer filling inside the vacuum glass bottles;

After the filling finished, the another button beside the vacuum button can be turned on, at that time the sucker working to exhaust the redundant CO2 inside the glass bottle to make sure the same pressure than the outside, and then all works stop after the filling heads get out of the glass bottles, the filling process finished, and then filled bottles get out of the machine through the star wheel turning over;

There are 2 suits of valve open-close systems in the filling tank to make twice bottle air vacuum to reduce as much air in the bottle, also it can take away the foam before capping, then Oxygen content inside bottle will be less than 0.15 mg O2/l;

The whole machine is made of SUS304. The filling head is spring type without dead angel, no dripping. Easy for clean and maintenance. The holding clap model is suitable for all bottles with same bottle neck, it is easy for change bottle shape and volumes.

Parameters:

Filling heads: 12 pcs

Power: 0.75KW

Dimension: 1100*1050*1850mm

Weight: 1000KG

General specifications of 6 head glass bottle Crown capper with trembling cap sorter:

The machine is sued for high speed crown capping for glass bottles;

The machine is set with bottle dia-plate for automatic bottle entrance; Workers put caps into cap loader, Oscillating coil will unscramble and load bottle automatically, with help of compressed air, caps will load correctly to capping head; By the main motor driven energy, the capping tube move up and down to finish the capping job; When one bottle capping finish, the spring in the capping tube will flick off the done bottle and start for a new one; Comparing with 2000BPH capper, this one is using adjustable speed motor to control speed, and transmission part develop to upgrade speed also;

The machine is produced with high quality SUS304, is with reasonable construction, easy for bottle change, easy for maintenance;

Parameters:

Capacity: 0-2000BPH

Capping head: 6 pcs

Capping tube stroke: 58mm

Applicable bottle: glass bottle, mouth 26.3±0.2mm

Applicable cap: crown cap, cap height 6.6±0.05mm, cap thickness 0.28±0.02mm

Main motor power: 1.1KW

Oscillating coil: 0.3KW

Suggested compressor: 0.6m3/min 0.7Mpa

Dimension: 1000*700*2000mm

Weight: 750KG

Equiment list of the 1500BPH 12-12-6 divided type glass bottle crown cap beer filling machine: