Semi-Auto Can Sealer For Tin / PET / Aluminum Cans Filling Machine

Usage:

This machine is widely used for sealing two-piece can, three-piece can, pop can, plastic can, tin can and aluminum can ,etc. Especially, in beverage, food and can factory.

Principle:

The machine consists of can lift system, rotary machine head, sealing wheel, sliding track, can tray, guiding shaft and so on.

Manual holding a can to put on support base, press start, then the can will be lift up to sealing head, the sealing wheel on the lift side will be close to the press head, the sealing wheels will start to seal at the meantime, and the sealing wheel will leave until the first edge curl work finished, then the sealing wheel on the right side will go to finish the second edge curl work to form the sealing, then one can will be sealed. The seaming effect is good. By adjusting support height, the can height can be adjusted. By changing support base and sealing head, different diameter can will be sealed.

Characteristics:

1.The machine is driven by an electric motor and its construction is compact, so it is easy for operation and maintenance and increase the productivity.

2.This machine seal/close can lid/cover at can bottom/end at can body, and it has second seal, so it can seal tightly, and without leakage.

3.This machine can seal perfect tin seam , and simple construction. It is light in weight ,small bulk, less noise and suitable for different size cans .

4.This machine can seal round cans in different sizes, It can seal different diameter when change some small parts.

5.The machine can be adjusted according to the customer's specific requirements, if customers want to seal other size of cans, just need to change the sealing/seamer mould.

Parameters:

motor power: 0.37kw

overall dimension: 600*400*700mm

applicable can diameter: Φ35-Φ126mm when change parts needed for different diameters

applicable can height: 40-200mm

Voltage: 220V 1PH 50HZ or customized

total weight: 70kg