|
[China]
Trade Verify
Address: 13th Floor, C1 Building, Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City, 523808, Guangdong.
Contact name:Evelyn Chow
Shenzhen HAISEN Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
6 Switch Codes Setting 5.8G Dimmable Motion Sensor For Ceiling Light
6 Switch Codes Setting Parameters On Off Cotrol For Ceiling Light
Setting of ON/OFF sensor:
| Detection area In this area,movement will be detected and able to trigger the sensor.100% detection area is also known as the strong sensitvity. | |
| Hold-time The period of light keeping 100% brightness after moving objects leave the detection area. | |
| Daylight threshold Definition of the ambient brightness; only when the ambient brightness is lower than the preset specific lux amount, the sensor will work; when it's preset as "disable",the sensor works everytime it detects motion regardless the ambient brightness. |
Features of ON/OFF Sensor:
1. Automatic On/off control with Daylight sensor.
2. The applied voltage ranges from 120 to 277VAC.
3. Super small installation size,convenient for customers to install in the lamps.
4. The sensor complies with FCC and UL certification.
5. 5 years warranty.
ON/OFF control Detection area Daylight snesor
Hold time 5 years warranty
Technical date of ON/OFF sensor:
| Operating voltage | 120-277VAC,50Hz/60Hz |
| Switching capacity | Max,3.0A@120Vac,50/60Hz; Max,2.0A@277Vac,50/60Hz |
| Stand-by power | ≤1W |
| Detection area | 10%/50%/75%/100% |
| Hold time | 5s/90s/5min/15min |
| Daylight threshold | 2Lux/10Lux/50Lux/Disable |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Operating temperature | -20°C~+60°C |
Detection area of ON/OFF sensor:
| Mounting height | 2.5-6m/8.2-19.8ft (ceiling mounted) |
| Detection range | Radius, 3-6m/9.84-19.68ft (ceiling mounted) |
| Detection angle | ≤150 °(without the glass) |
| Motion detection | 0.5~1.5m/s |
Other parameters of ON/OFF sensor:
| Size | (L*W*H)80.2*36.6*23mm |
| Connector | 4 press terminals (N.N.L.L ') |
| Antenna module | Emit microwave signal,sense the motion of the object |
| Daylight sensor | Inducts the external light sensitivity threshold, controls the lamp switch |
| Control method | ON/OFF control |
| 1. Connector:4 press terminals (N.N.L.L ') 2. Installation hole:Two mounting holes for easy fixation in the lamps 3. Daylight sensor:Strain the light intensity, convert the light signal into electrical signal, control the switch of the lamp 4. Antenna module:Detect motion signals of objects 5. Dial code:Sensitivity, delay time, and light sensitivity thresholds can be set by dialing | |
| The shell size is 80.2*36.6*23mm | |
| 4 press terminals (N.N.L.L ') |
| In a well-lit environment, it can detect the movement of objects in time and still keep the lights off | |
| When the external environment starts to dim and is lower than the preset light sensitivity value, the motion of an object is detected. The sensor then controls the lamp and keeps the light on | |
| When the moving object leaves the detection area, the lamp will enter the delay stage (keep the brightness when triggered). After the delay time, the lamp will keep the off state and wait for the next trigger. |
| When motion is detected, the sensor will switch on the light to 100% brighteness. | |
| After people leave the detection area, light remains 100%
brightness within hold time. | |
| After the last detection and the present hold time elapsed, light OFF. |
