Active Member
|
[China]
Address: YANQING ROAD XIGONGGUAN 2-1-610 JIMO QINGDAO CHINA
Contact name:MA NING
QINGDAO DASS SENSOR TECHNOLOGY CO.,LTD. |
|
|
U-shaped Photoelectric Sensor /U-type Photoelectric Sensor/Photoelectric Slot Sensor
Photomicrosensor with built-in amplifier and attached cable reduces
external light interference.
• Light modulation effectively reduces external light interference.
• Wide operation voltage range: 5 to 24 VDC
• For the most recent information on models that have been
certified for safety standards,Easy operation monitoring with
bright light indicator.
• Easy operation monitoring with bright light indicator.
| Model | NPN | DS-ES61P | DS-ES62 | DS-ES63 | DS-ES64 |
| PNP | DS-ES61P | DS-ES62P | DS-ES63P | DS-ES64P | |
| Sensing distance (slot width) | 5mm(slot width) | ||||
| Sensing object | Opaque: 2 × 0.8 mm min. | ||||
| Differential distance | 0.025mm | ||||
| Light source | GaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm | ||||
| output way | N=NPN.NO.NC P=PNP.NO.NC | ||||
| voltage | 5 to 24 VDC ±10%, ripple (p-p): 10% max. | ||||
| Current consumption | Average: 35 mA max(NPN).; Peak: 30 mA max.(PNP) | ||||
| Ambient illumination | 1,000 lx max. with incandescent light on the surface of the receiver | ||||
| Ambient temperature range | Operating: −25 to +55°C Storage: −30 to +80°C | ||||
| Ambient humidity range | Operating: 5% to 85% Storage: 5% to 95% | ||||
| Vibration resistance | Destruction: 20 to 2000 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions | ||||
| Shock resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions | ||||
| Degree of protection | IEC IP50 | ||||
| Connecting method | Pre-wired (standard cable length: 1 m) | ||||
| Response frequency | 1 KHZ min(Average 3 KHZ) | ||||
| Weight | 29g | ||||
| Control output | NPN voltage output: Load power supply voltage: 5 to 24 VDC Load current: 100 mA max. OFF current: 0.8 mA max. 100 mA load current with a residual voltage of 0.8 V max. 40 mA load current with a residual voltage of 0.4 V max, PNP voltage output: Load power supply voltage: 5 to 24 VDC Load current: 50 mA max. OFF current: 1.3 mA max. 50 mA load current with a residual voltage of 1.3 V max | ||||
| Material | Shell material:PBT/ABS Pervious to light part:PC | ||||
