Active Member
|
[China]
Address: 1101, floor 11, block C, Hengbo lirongfeng Industrial Park, Xuegang North Road, Qinghu community, Longhua street, Longhua District, Shenzhen
Contact name:Blake.Wu
Shenzhen Gestton Industrial Co., LTD |
|
|
Conference Solution Professional Meeting Microphone Desktop Wired Meeting Microphone With Central Control Of Conference
Frequency Stability | ±0.001% |
S/N Ratio | >82 dBA |
T. H. D | <0.05% |
Sensitivity | -15dB |
Power Supply | AC110-240V/50-60Hz |
| Max Deviation Range | ±45KHz |
| Frequency Response | 50Hz-20KHz |
| Installation methods | 19-inch standard cabinet |
| Weight | 5.15kg |
| Dimension | 483x323x90 mm |
Power Supply | DC 24v |
RF Power Output | 15mA-60mA |
| S/N Ratio | >70dBA |
| Frequency Response | 100Hz-12KHz |
Type | Condenser |
polar pattern | Cardioid |
Features
GMS-5200 series is designed for simpleconference room. Itis a highly stable conference system with easy operation
. The host machine has a front USB recording port, you can use a USB flash drive to record the entire meeting process .
. Up to 100 units can be connected to onesystem, maximum 12 chairman units.
It can be expanded to 250 units withexpanding device.
. With speaking mode as FIFO,LIFO, voicecontrol, chairman mode, all on mode.
. The system supports hot swap operations. you can reduce or add microphone units
. Camera tracking function, maximum 6 cameras can be connected via video switch device
. Support central controller, Support unit hot-plug connection, Quick & portable installation
. Hyper-cardioid directional condensercapsule,1500px speaking distance, Free from interference of cellphone
Detachable design for mic tube & micbase
. Intelligent digital design control circuit, low power consumption.
. High-fidelity unidirectional condenser microphone core, sound
reproduction, high clarity and low noise.
. The delegate unit has the function of applying for speaking, and
the order of the meeting is orderly and not chaotic.
. Excellent anti-interference ability from mobile phones.
. With internal magnetic high-fidelity speaker, it will automatically
mute when the microphone is turned on,
and it is not easy to produce howling.
. The left side is designed with 2 3.5 audio output and input
interfaces, and the access device can replace the conference
microphone to speak and listen to the content of
other non-voting conference speeches.
. The conference unit supports hot-swappable function, comes with a
2.1-meter 8P cable, hand-in-hand connection mode,
easy installation and flexible operation.
. Metal base, durable, beautiful and fashionable, not fading or
deforming.
GMS-5200 Rear Panel 
[1]. Power Socket
[2]. Rs-232 camera interface
[3]. 485 Type model port
[4]. 232 Central control receiving code interface
[5]. Video switcher interface
[6]. 232 Central control sending code interface
[7]. Router Interface
[8]. U disk recording
[9]. Connect USB port of computer
[11]. Auxiliary audio interface
[12]. Microphone unit interface
[13]. digital cascade ports
Microphone unit
. With detachable design for the MIC tube and MICbase. Random connection the microphone unit
. Adopt hyper cardioid-directional condensermicrophone, which can carry out high quality pick up.
. With LCD display. It can display signal, batteryPower ,ON/OFF, ID relevant key indication.
. With priority button for chairman unit,With red ring indicator shows the active unit, With hyper-cardioid directional capsule.
. Free from interference of mobile. LCD display , Detachable mic tube
Application
Ideally suitable for small scale boardrooms and meeting rooms, Large Meeting Room, Large lecture seminar.
The included clothbound USB cable, which happens to be among the longest cables we've seen included with USB mics, connects to a micro USB port on the lower, opposite end of the mic, and this is also where the headphone jack and high-pass filter button are located. The headphone jack offers zero-latency monitoring. Securing the mic's position with the side knobs on the mount is essential, as the tug from either the USB cable or, more likely, the headphone cable, would be enough to swing the mic backward or forward if it were not locked into position.
