|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist,Changzhou,Jiangsu,China(Mainland)
Contact name:Kangtai Lee
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Micro Slider Screw Stepper Motor 10mm 5VDC Mini Linear Stepper Motor For Precise Instrument Focusing Adjustment
VSM10198 micro stepping motor is widely used in cameras, optical instruments, lenses, precision medical devices, automatic door locks and other fields due to its small size, high accuracy, easy control and other excellent characteristics.
The effective travel of the lead screw of the motor is 40mm, the lead screw is M2P0.4, the basic step angle of the motor is 18 degrees, and the motor runs 20 steps every week. Therefore, the displacement resolution can reach 0.02mm to achieve precision control. The screw with the screw pitch of 0.4 mm of the output shaft is supported by the slider and the screw to rotate into thrust.
The motor input part of FPC can be changed to the form of connecting wire pin, PCB, etc. according to customer requirements.
The mounting bracket can be customized according to the customer's requirements, and the black slider shape on the motor can also be designed and developed according to the customer's installation
| PRODUCT NAME | 10MM MICROLINEAR STEPPER MOTOR |
| MODEL | VSM10198 |
| MAX. STARTING FREQUENCY | 1000 PPS min. (AT 3.3 V DC) |
| MAX. SLEWING FREQUENCY | 1200 PPS min. (AT 3.3 V DC) |
| PULL IN TORQUE | 3.5gf-cm min. (AT 500 PPS , 3.3V DC) |
| PULL OUT TORQUE | 4.5gf-cm min. (AT 500 PPS , 3.3V DC) |
| INSULATION CLASS | CLASS E FOR COILS |
| INSULATION STRENGTH | 300 V AC FOR ONE SECOND |
| INSULATION RESISTENCE | 50 MΩ (DC 100 V) |
| OPERATING TEMPERATURE RANGE | -20 ~+70 ℃ |
| OEM & ODM SERVICE | AVAILABLE |
| PRODUCT NAME | 10MM MICROLINEAR STEPPER MOTOR |
Motor’s design can be adjusted based on customer’s requirement
including:
Motor’s diameter: we have 6mm, 8mm, 10mm, 15mm and 20 mm diameter
motor
Coil resistance/ rated voltage: coil resistance is adjustable, and
with higher resistance, motor’s rated voltage is higher.
Bracket design/ lead screw length: if customer want the bracket to
be longer/short, with special design such as mounting holes, it’s
adjustable.
PCB + cables + connector: PCB’s design, cable length and connector
pitch are all adjustable, they can be replaced into FPC if
customers require.
Lead time for samples:
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of
customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Packaging:
Samples are packed in foam sponge with a paper box, shipped by
express
Mass production, motors are packed in corrugated cartons with
transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
On samples and air shipping, we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai
port. (45~70 days for sea shipping)
1.Are you a manufacturer?
Yes, we are a manufacture, and we produces mainly stepper motors.
2.Where is your factory location? Can we visit your factory?
Our factory is located in Changzhou, Jiangsu. Yes, you are very
welcome to visit us.
3.Can you provide free samples?
No, we don’t provide free samples. Customers won’t treat free
samples fairly.
4.Who pays for shipping cost? Can I use my shipping account?
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we
can use you shipping account.
5.What’s you MOQ? Can I order one motor?
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the
motor is damaged during your testing, and you can have a back-up.
6.We are developing a new project, do you provide customization
service? Can we sign a NDA contract?
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set
customization from design drawing to production.
We are confident we can give you few advice/suggestions for your
stepper motor project.
If you are worrying about confidential issues, yes, we can sign a
NDA contract.
7.Do you sell drivers? Do you produce them?
Yes, we do sell drivers. They are only suitable for temporary
sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors
