|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist,Changzhou,Jiangsu,China(Mainland)
Contact name:Kangtai Lee
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
18 Degrees Step Angle M3 Lead Screw Linear Stepper Motor 15 Mm Applicable To Medical Devices, Etc
SM15-80L is a stepping motor with a diameter of 15mm. The screw pitch is M3P0.5mm, (Move 0.25mm in one step. If it needs to be smaller, subdivision drive can be used), and the effective stroke of the screw is 80mm. The motor has a white POM slider. As it is a mold production, it can save costs. It can also customize the slider made of brass according to customer needs. However, the slider needs CNC processing, so the cost is relatively high. Considering the cost and the structure allows, it is recommended that the plastic slider be preferred for production
The greatest advantage of the brass slider is that it is supported by two linear bearings, which provide strong support for the slider and ensure that the slider can move smoothly even under high load.
Therefore, the brass slider has better stability and higher price is fully justified.
For the screw rod stroke, considering your installation space, we can also customize the bracket with short stroke to save installation space
| Product Name | 15 mm diameter stepper motor with lead screw and slider |
| Model | VSM15-80L |
| Max. Starting Frequency | More Than 1100 PPS min. |
| Max. Response Frequency | More Than 1600 PPS min. |
| Voltage | 12 V |
| Pull Out Torque | 500 gf-cm min. (AT 129 PPS , 12V DC) |
| Insulation Class | CLASS E FOR COILS |
| Insulation Strength | 100 V AC FOR ONE SECOND |
| Insulation Resistence | 50 MΩ (DC 100 V) |
| Operating Temperature Range | -20 ~+50 ℃ |
| Motor Surface Temperature | 80 ℃ |
| OEM & ODM SERVICE | AVAILABLE |
This linear stepping motor is widely used in medical devices, scanners, automotive instruments, security systems, optical fiber welding equipment and other fields.
Motor’s design can be adjusted based on customer’s requirement
including:
Motor’s diameter: we have 6mm, 8mm, 10mm, 15mm and 20 mm diameter
motor
Coil resistance/ rated voltage: coil resistance is adjustable, and
with higher resistance, motor’s rated voltage is higher.
Bracket design/ lead screw length: if customer want the bracket to
be longer/short, with special design such as mounting holes, it’s
adjustable.
PCB + cables + connector: PCB’s design, cable length and connector
pitch are all adjustable, they can be replaced into FPC if
customers require.
Lead time for samples:
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of
customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Packaging:
Samples are packed in foam sponge with a paper box, shipped by
express
Mass production, motors are packed in corrugated cartons with
transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
On samples and air shipping, we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai
port. (45~70 days for sea shipping)
1.Are you a manufacturer?
Yes, we are a manufacture, and we produces mainly stepper motors.
2.Where is your factory location? Can we visit your factory?
Our factory is located in Changzhou, Jiangsu. Yes, you are very
welcome to visit us.
3.Can you provide free samples?
No, we don’t provide free samples. Customers won’t treat free
samples fairly.
4.Who pays for shipping cost? Can I use my shipping account?
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we
can use you shipping account.
5.What’s you MOQ? Can I order one motor?
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the
motor is damaged during your testing, and you can have a back-up.
6.We are developing a new project, do you provide customization
service? Can we sign a NDA contract?
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set
customization from design drawing to production.
We are confident we can give you few advice/suggestions for your
stepper motor project.
If you are worrying about confidential issues, yes, we can sign a
NDA contract.
7.Do you sell drivers? Do you produce them?
Yes, we do sell drivers. They are only suitable for temporary
sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors
