|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist,Changzhou,Jiangsu,China(Mainland)
Contact name:Kangtai Lee
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
12vDC Geared Stepper Motor PM25 Micro Gearbox Motor 25mm Permanent Magnet Geared Stepper Motor
This motor is a 25 mm diameter motor with a height of 25 mm. The
basic step angle of the motor is 7.5 degrees. After the reducer
decelerates, the step angle resolution can reach 0.075~0.75
degrees, which can achieve accurate position control and other
functions.
Product standard gear reduction ratio: 1:10 1:15 1:20 1:30 1:30
1:60 1:75 1:100
On the basis of matching reducer with stepping motor, the stepping
motor adopts an external reducer with built-in structure and metal
gears, which are easy to transmit greater torque
This product is mainly used for toilet valve, camera, PTZ and other
occasions.
| Model No. | SM25-048S-193/10 |
| Current Per Phase | 120 mA/Phase |
| Winding Resitance | 100±10% Ω at (25℃) |
| Rated voltage | 12 V DC |
| No. of phases | 4 phases |
| Step Angle | 7.5°/10 |
| Max Pull-in Rate | 500PPS |
| Holding Torque | 1000 g.cm |
| Pull-in Torque at 100pps | 400 g.cm |
| Winding temperature at 900pps | ≤65K |
The gear box has high precision, high efficiency and low noise,
which makes the product have good reliability.
The power input position of the stepper motor can be in the form of
FPC, FFC, PCB cable, etc.
The output shaft of the motor can adopt various output structures,
such as circular shaft, D-shaft and wire bar.
* Saliva Analyzer
* Blood Analyzer
* Welding Machine
* Intelligent Security Products
* Fiber Fusion Splicer
* Digital Electronics
Lead time for samples:
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of
customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Packaging:
Samples are packed in foam sponge with a paper box, shipped by
express
Mass production, motors are packed in corrugated cartons with
transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
On samples and air shipping, we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai
port. (45~70 days for sea shipping)
1.Are you a manufacturer?
Yes, we are a manufacture, and we produces mainly stepper motors.
2.Where is your factory location? Can we visit your factory?
Our factory is located in Changzhou, Jiangsu. Yes, you are very
welcome to visit us.
3.Can you provide free samples?
No, we don’t provide free samples. Customers won’t treat free
samples fairly.
4.Who pays for shipping cost? Can I use my shipping account?
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we
can use you shipping account.
5.What’s you MOQ? Can I order one motor?
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the
motor is damaged during your testing, and you can have a back-up.
6.We are developing a new project, do you provide customization
service? Can we sign a NDA contract?
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set
customization from design drawing to production.
We are confident we can give you few advice/suggestions for your
stepper motor project.
If you are worrying about confidential issues, yes, we can sign a
NDA contract.
7.Do you sell drivers? Do you produce them?
Yes, we do sell drivers. They are only suitable for temporary
sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors
