|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist,Changzhou,Jiangsu,China(Mainland)
Contact name:Kangtai Lee
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
N20 DC Brushed Motor With 1024 Gearbox, Output Shaft Can Be Customised
This is an N20 DC motor with a 1024 gearbox.
The N20 DC motor is also a brushed DC motor with a no-load speed of
approximately 15,000 RPM for a single motor.
When the motor is connected to a gearbox, it runs slower and with
more torque.
The output shaft of this motor is a D-shaft and the customer can
also choose a threaded shaft, if required.
Gearboxes are available in the following gear ratios:
10:1,30:1,50:1,100:1,150:1,300:1,323:1,483:1,500:1,668:1,945:1,1000:1,
the customer can choose the gear ratio according to his needs.
When the gear ratio is less than 600:1, the gearbox height can be
adjusted to 6 mm (short version).
The output can be a D-shaft with a diameter of 3mm*D2.5mm, or an M3
leadscrew, or other customised shaft type.
| Model No. | N20-1024GB |
| Driving voltage | 5V DC |
| Resistance | 25Ω |
| Inductance | 4 mH |
| No-load speed | 9000RPM |
| Reduction ratio | 298:1 |
| No-load output speed | 25RPM |
| No-load current | ＜60mA |
| Output torque | 800g.cm |
| Run direction | CW/CCW |
DC brushed motors are the most commonly used motors on the market.
DC motors have brushes inside, l positive and negative poles (+ and
-).
The speed of the DC motor can be controlled with different gear
ratios or with PWM (pulse width modulation)
By means of a torque boost from the gearbox, the DC motor can
achieve higher torques than the original torque of the motor.
It can also be installed in the following positions according to
customer requirements:
1024GB Series + N20 DC motor
| Gear ratio | 10:1 | 16:1 | 20:1 | 30:1 | 35:1 | 39:1 | 50:1 | 66:1 |
| Precise ratio | 9.952 | 15.955 | 20.622 | 29.806 | 35.337 | 38.889 | 49.778 | 66.311 |
| Tooth mumber | 14 | 20 | 18 | 14 | 18 | 18 | 15 | 18 |
| Gear levels | 2 | 4 | 4 | 3 | 4 | 4 | 4 | 4 |
| Efficiency | 80% | 64% | 64% | 71% | 64% | 64% | 64% | 64% |
| Gear ratio | 87:1 | 102:1 | 153:1 | 169:1 | 210:1 | 243:1 | 297:1 | 350:1 |
| Precise ratio | 87.303 | 101.821 | 153.125 | 169.383 | 209.402 | 243.158 | 297.071 | 347.972 |
| Tooth mumber | 15 | 14 | 16 | 15 | 19 | 15 | 15 | 14 |
| Gear levels | 4 | 4 | 5 | 5 | 5 | 5 | 5 | 5 |
| Efficiency | 64% | 64% | 58% | 58% | 58% | 58% | 58% | 58% |
Medical devices, robotics field, smart home, automotive drive, aircraft, consumer electronics, industrial automation, optical instruments and equipment field, etc.
1. cheaper (compared to stepper motors)
2. Smaller size
3. Direct connection, easy to use
4. Wide range of use
5. Fast speed of rotation
6. Higher efficiency (compared with stepper motors)
Out of the shaft length (the tail can be out of the shaft matching
encoder),
The voltage,
The rotational speed,
Outlet mode,
And connectors and so on
Lead time for samples:
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of
customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Packaging:
Samples are packed in foam sponge with a paper box, shipped by
express
Mass production, motors are packed in corrugated cartons with
transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
On samples and air shipping, we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai
port. (45~70 days for sea shipping)
1.Are you a manufacturer?
Yes, we are a manufacture, and we produces mainly stepper motors.
2.Where is your factory location? Can we visit your factory?
Our factory is located in Changzhou, Jiangsu. Yes, you are very
welcome to visit us.
3.Can you provide free samples?
No, we don’t provide free samples. Customers won’t treat free
samples fairly.
4.Who pays for shipping cost? Can I use my shipping account?
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we
can use you shipping account.
5.What’s you MOQ? Can I order one motor?
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the
motor is damaged during your testing, and you can have a back-up.
6.We are developing a new project, do you provide customization
service? Can we sign a NDA contract?
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set
customization from design drawing to production.
We are confident we can give you few advice/suggestions for your
stepper motor project.
If you are worrying about confidential issues, yes, we can sign a
NDA contract.
7.Do you sell drivers? Do you produce them?
Yes, we do sell drivers. They are only suitable for temporary
sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors
