Changzhou Vic-Tech Motor Technology Co., Ltd. |
Verified Suppliers
|
|
High Speed 2 Phase 4 Wire Micro Stepper Motor 6mm Pm Stepper Motor Long Life Span VSM0613
VSM0613 is a micro stepping motor. The motor diameter is 6 mm, the
height is 7 mm, the diameter of the output shaft is 1 mm, and the
height of the conventional output shaft is 3.1 mm. The length of
the output shaft can be customized according to the customer's
installation needs. The motor output shaft is equipped with a
conventional gear with a module of 0.2, a number of teeth of 9, and
a gear thickness of 1.8 mm. The gear can also be customized
according to the customer's requirements
The output shaft of the motor can also be equipped with gear,
pulley, worm, screw and other corresponding output devices, which
can be customized according to customer installation requirements
Because of its small size, high precision, easy control and other
excellent characteristics, this micro stepping motor is widely used
in cameras, optical instruments, lenses, precision medical devices,
and other fields.
The motor input part of the connecting line can be changed to bare
needle, PCB, FPC and other forms according to customer
requirements.
PRODUCT NAME | 6 MM MICRO STEPPER MOTOR |
MODEL | VSM0613 |
MAX. STARTING FREQUENCY | 1300 PPS min. (AT 3.3 V DC) |
MAX. SLEWING FREQUENCY | 2500 PPS min. (AT 3.3 V DC) |
PULL IN TORQUE | 0.8gf-cm min. (AT 500 PPS , 3.3V DC) |
PULL OUT TORQUE | 1.0gf-cm min. (AT 500 PPS , 3.3V DC) |
INSULATION CLASS | CLASS E FOR COILS |
INSULATION STRENGTH | 3.0mA (max.) |
INSULATION RESISTENCE | 1 MΩ (DC 100 V) |
OPERATING TEMPERATURE RANGE | -10~+60 ℃ |
OEM & ODM SERVICE | AVAILABLE |
Our micro stepper motors generally have 18 degrees step angle.(Full
step driving)
That means it takes 20 steps to rotate one turn.
Motor’s step angle is related to internal stator’s design.
We have micro stepper motors with different diameters, and motor’s
torque is related to its size.
Here is relationship between motor’s diameter and torque(with
suitable running frequency, at rated voltage):
6mm motor: about 1 g*cm
8mm motor: about 3g*cm
10mm motor: about 5 g*cm
15mm motor: about 15 g*cm
20mm motor: about 40 g*cm
Motor’s speed is determined by driving frequency, and it has nothing to do with load (unless it’s losing steps).
Due to high precision speed control of stepper motors, with a driver controlled stepping you can achieve very precise positioning and speed control. For this reason, stepper motors are the motor of choice for many precision motion control applications.
Motor’s design can be adjusted based on customer’s requirement
including:
Motor’s diameter: we have 6mm, 8mm, 10mm, 15mm and 20 mm diameter
motor
Coil resistance/ rated voltage: coil resistance is adjustable, and
with higher resistance, motor’s rated voltage is higher.
Bracket design/ lead screw length: if customer want the bracket to
be longer/short, with special design such as mounting holes, it’s
adjustable.
PCB + cables + connector: PCB’s design, cable length and connector
pitch are all adjustable, they can be replaced into FPC if
customers require.
Lead time for samples:
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of
customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Packaging:
Samples are packed in foam sponge with a paper box, shipped by
express
Mass production, motors are packed in corrugated cartons with
transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
On samples and air shipping, we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai
port. (45~70 days for sea shipping)
1.Are you a manufacturer?
Yes, we are a manufacture, and we produces mainly stepper motors.
2.Where is your factory location? Can we visit your factory?
Our factory is located in Changzhou, Jiangsu. Yes, you are very
welcome to visit us.
3.Can you provide free samples?
No, we don’t provide free samples. Customers won’t treat free
samples fairly.
4.Who pays for shipping cost? Can I use my shipping account?
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we
can use you shipping account.
5.What’s you MOQ? Can I order one motor?
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the
motor is damaged during your testing, and you can have a back-up.
6.We are developing a new project, do you provide customization
service? Can we sign a NDA contract?
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set
customization from design drawing to production.
We are confident we can give you few advice/suggestions for your
stepper motor project.
If you are worrying about confidential issues, yes, we can sign a
NDA contract.
7.Do you sell drivers? Do you produce them?
Yes, we do sell drivers. They are only suitable for temporary
sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors