Galvanized Iron Bag 380mpa Double Loop Tie Wire Metal

Galvanized Iron Double Loop Tie Wire Bag Loop Tie Wire 380mpa Metal Tie Wire

Metal Tie Wire introduction

Metal tie wire is a kind of soft iron wire product made of low carbon steel by cold drawing, heating, constant temperature and heat preservation. According to different uses, the composition of iron wire is also different. It contains iron, cobalt, nickel, copper, carbon, zinc and other elements. The hot metal billet is rolled into a 6.5mm thick steel bar, that is, wire rod, and then put it into the wire drawing device to draw wires with different diameters, gradually reduce the aperture of the wire drawing disc, and carry out cooling, annealing, plating and other processing processes to make iron wires of different specifications.Iron wire production developed earlier because of its simple process and wide application. Iron wire or steel wire (the corresponding enterprise is "wire mesh enterprise") is the re cold processing product of steel wire rod, and the materials used are generally low carbon steel or stainless steel. Generally, the iron ingot (steel ingot) for making iron wire (steel wire) can be produced through several procedures, such as shell stripping, acid pickling, water washing, saponification, drying, drawing, annealing, cooling, acid pickling, water washing, galvanizing line, packaging, etc.

Metal Tie Wire Data :

Metal Tie Wire specification as blows :

Metal Tie Wire Features

1: exhibit attractive properties as high strength and ductility, good corrosion resistanc

2: clean and convenient

3: unbreakable, Tensile strength is 300-380mpa

4: durable , After high temperature treatment, the ductility can reach 15% - 20%

5: easily twist , Raw material annealed 3 times, better flexibility, so it is easier to twist binding

Metal Tie Wire Usage / Application

Use a kind of wire twister to tie the two ends of the double loop wire together.

Loop tie wire How to use: Hook the two rings of the buckle with a hooked wire tool and tighten it in one direction.

1. Used as tie wires to bind bags and rebars.

2. Used in the family garden to bind branches of plants.Securing trees, wines and creepers o supports and trellises

3. Applied in the farm to bundle twigs.

4. erecting and joining support structur

5. Tying bags or as a ma or laundry bag seal

6. Finish of loop tie wire can be black annealed loop ie wire. galvanized loop te wire or PVC coated loop wire.

7. Small coil wire tie finds most uses in binding of different materials especially for daily use

    

Loop tie Wire information:

A, Material low carbon steel wire
B , Wire diameter 1mm-2mm
C , Length4-24inch
D , Surface Black annealed, copper, galvanied or PVC coated
E , Feature It is easy to operate, enhances the working efficiency reduces pollution
F, Use The loop wire es as a binding wire used in packing or construction

Technical principle of Metal Tie Wire :

Because the loop tie wire is suitable for binding, the raw materials are all annealed at high temperature, so the product has better tensile strength and elongation, and the user can have better experience.

Solution to blackening of galvanized wire:

One is to do a good job in the packaging of galvanized wire to avoid bumping and ensure the integrity of zinc layer;

The second is to pay attention to the storage and use environment of galvanized wire products. The specifications of galvanized wire should be selected according to the actual environmental standards;

Third, the production site of galvanized wire products shall be clean and tidy. How much is the galvanized wire? The production shall be carried out according to scientific operation methods. The operators shall wear the required clothes.If it is hot-dip galvanized wire products, we must do a good job in passivation treatment, will be able to effectively prevent discoloration, prolong Discoloration method to do in place, can solve the problem of discoloration.

Metal Tie Wire Process :

First, the raw material is wire rod Q195, which is processed and thinned. In the second drawing process, the wire diameter required by the customer is reached. At this time, it is about 100kg / plate. Put the wire in the heating furnace for heating and annealing treatment

Our services

Qingrui has the best factory price in the early stage. When the order is put into production, the raw material quality inspection data will be sent to the customer for quality inspection and confirmation before production. When the production reaches half, the video will be sent to the customer for product inspection. Before the delivery of large goods, the quality inspection and packaging acceptance and confirmation will be carried out with the customer, and the overall full name will be reported to the customer for the real-time production progress of factory production.

Metal Tie Wire Packaging Details

1. Bundled together by tie wire.

2. plastic inside and cartons outside.

3. plastic inside and woven bags outside.

4. water-proof paper inside and woven bags outside

5. or as your demand