Duplex UNS S32205 Capillary Coiled Tubing Thermoplastic Encapsulation Material

Duplex UNS S32205 Encapsulated Control Line Thermoplastic Encapsulation Material

Duplex Stainless S32205, Chemical composition

Application: High mechanical strength and good resistance to localized cracking & chloride stress corrosion.

Tensile strength, min.: 90ksi (620MPa)

Yield strength, min.: 65ksi (450MPa)

Elongation in 2 in., min.: 25%

Hardness, max.: Brinell 290, or Rockwell C 30.5

Duplex Stainless S32205, Characteristics and properties

Application

Duplex Stainless S32205 seam welded pressure tubing in the heat treated condition is typically used in oil and natural gas wells for chemical injection applications. In such applications, it is commonly referred to as capillary tubing and is free-hanging (self-supporting) inside the production casing. The chemicals being injected are often used to enhance production flow rates, inhibit corrosion or scaling and/or de-water. However, the tubing can also be used for control line tubing applications including hydraulically actuated surface-controlled subsurface safety valves. For control line applications, the tubing is generally deployed by strapping it to the outside of the production casing. The tubing is frequently supplied as 5,000 to 35,000 ft. coils on a wooden or steel reel, depending on size.

Description

Duplex Stainless S32205 is a duplex stainless steel. When properly heat treated, the microstructure consists of a nearly equal mixture of the austenitic and ferrite phases. This two-phase microstructure produces a fine grain size which increases the yield strength. In the final heat treated condition, Duplex Stainless S32205 can achieve a yield strength approximately twice that of austenitic alloys such as 316L, 825 and 625 which must be cold worked to achieve comparable yield strengths. Duplex stainless steels are often classified as lean, conventional, super or hyper based upon their pitting resistance equivalent (PRE or PREN). Various PRE formulas are used to rank an alloy’s resistance to chloride pitting corrosion based upon its composition. Duplex Stainless 2205 typically has a PRE of 36 and is considered a conventional duplex stainless steel. Duplex Stainless S32205 is often selected for use in oil and gas production environments based upon its higher strength and resistance to pitting, crevice and stress corrosion cracking in chloride containing environments. Consult ISO 15156-3, Table A.24 for the limits regarding the use of Duplex Stainless S32205 in hydrogen sulfide containing environments for oil and gas production.

HYDRAULIC CONTROL LINE APPLICATIONS

STAINLESS STEEL AND HIGH NICKEL ALLOYS COILED TUBING SOLUTIONS

MEILONG is an important manufacturer in premium coiled seamless & welded tubular solutions for oil and gas applications. In an endeavor to increase its presence in subsea, MEILONG has extended its offer by developing a highly innovative tubular solution for umbilical projects.

MEILONG has developed a strong and unique expertise in premium quality tubes to answer the most stringent specifications of its customers. Based on this expertise in high pressure, and extremely high pressure tubes, MEILONG’s state-of-art factory is exclusively dedicated to the manufacturing and supply of super duplex and high nickel alloys tubes for corrosive downhole applications and is now ready to offer the highest specifications for your toughest challenges.

High quality polymeric jackets/encapsulations provide added protection

Core tubing is evaporated with the latest thermoplastic elastomeric compounds designed to outlast the life of most project tubing installations by reducing the possibility of corrosion and mechanical damage. They can stand up to a wide range of chemical inhibitors and seawater. Most jackets are manufactured from fire retardant, all-weather, abrasion-resistant compound, designed to remain strong and flexible through wide ranges of temperatures and pressures.

PVC

PP (polypropylene)

SP (Santoprene)

F46 (FEP)

Nylon

Corrosion Resistance

S32205 duplex stainless steel is a cost effective solution for many applications where the 300 series stainless steels are susceptible to chloride stress corrosion cracking. Stress corrosion cracking occurs when stainless steels are subjected to tensile stress, while in contact with solutions containing chlorides. Increasing temperatures also increase the susceptibility of stainless steels to stress corrosion cracking.

The combination of chromium, molybdenum and nitrogen convey the good resistance of S32205 to chloride pitting and crevice corrosion. This resistance is extremely important for services such as marine environments, brackish water, bleaching operations, closed loop water systems and some food processing applications. The high chromium, molybdenum and nitrogen contents of S32205 provide corrosion resistance superior to common stainless steels, such as, 316L and 317L in most environments.

Production Process

Welded & Redrawn Tubing

Strip splice welds join lengths of cold rolled strip to enable long lengths between orbital welds (greater than 14,500 ft between orbital welds is achievable). The strip is formed into a tubular cross section and longitudinally seam welded using the gas tungsten arc (GTAW) process. The tubing is first sunk to an intermediate outside diameter, heat treated, and make the same process to obtain the desired size.

Seamless & Redrawn Tubing

Seamless extruded tube hollows are drawn or drawn / sunk to final size to produce seamless tubing coils 500 to 2,000 ft. long, depending upon the size. The tubing is heat treated and joined by orbital welding to achieve the desired length. The final material condition of the tubing is heat treated.

Standards and Specifications

Tubing Specification PTM-TS-011, Duplex Stainless 2507 Tubing for Control Line Applications

ASTM A789, Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

Quality Assurance

Eddy current test (ECT)

Ultrasonic test

Hydrostatic test

Chemical composition analysis

Tensile test

Hardness test

Dimension & visual inspect

Metallographic analysis

Coiled Encapsulated Tubing (Bare Tubing Size)

Tubing length up to 32,808 feet (10,000 m)

For control line, chemical injection line, umbilicals

Available materials

Austenitic: 316L

Duplex: S31803, S32205

Super Duplex: S32750

Nickel alloy: N06625, N08825

Norm Equivalence