65mm Precision Carbon Steel Tube S235 Carbon Seamless Steel Pipe
A 65mm precision carbon steel tube refers to a tube made from
carbon steel with a precise outer diameter (OD) measurement of
65mm. Here's a description of a 65mm precision carbon steel tube:
Material: Carbon Steel
- The tube is made from carbon steel, which is an alloy primarily
composed of iron and carbon. Carbon steel offers excellent
strength, durability, and thermal conductivity, making it suitable
for various applications.
Precision Tube
- The term "precision" indicates that the tube is manufactured with
tight dimensional tolerances and high surface quality. Precision
tubes are produced using advanced manufacturing processes to
achieve precise dimensions, smooth surfaces, and consistent wall
thickness throughout the length of the tube.
Outer Diameter (OD): 65mm
- The tube has an outer diameter of 65mm, which refers to the
measurement of the tube's outer circular cross-section. The precise
OD ensures compatibility and accurate fit with other components,
fittings, or systems it is intended to be used with.
Applications
- 65mm precision carbon steel tubes find applications in various
industries and sectors. They are commonly used in automotive,
aerospace, machinery, instrumentation, and other precision
engineering applications where tight tolerances, accuracy, and
reliable performance are crucial. These tubes can be used for
structural purposes, fluid or gas transportation, and as components
in precision assemblies.
Properties and Specifications
- Precision carbon steel tubes typically exhibit excellent mechanical
properties, including high tensile strength, hardness, and
dimensional stability. The specific properties and specifications
of the tube may vary based on the manufacturing standards, such as
ASTM, DIN, or JIS, as well as the specific requirements of the
application.
Surface Finish
- Precision carbon steel tubes often feature a smooth and clean
surface finish. The surface may be further treated or coated to
enhance corrosion resistance, improve aesthetics, or facilitate
specific functionalities, depending on the application
requirements.
It's important to note that the specific properties, tolerances,
and applications of a 65mm precision carbon steel tube may vary
depending on the manufacturer and the requirements of the intended
application. It's recommended to consult the manufacturer's
specifications or contact the supplier for detailed information on
the specific characteristics of the tube.
Carbon Steel in the Automotive Industry
1. Carbon steel for automobile industry
Carbon steel is one of the most important materials used in the
automotive industry. It is widely used in the manufacture of
bodywork, engines and other components. The main reasons for its
widespread use are its good strength-to-weight ratio, high
durability, and low cost.
In recent years, however, the use of carbon steel in cars has been
declining due to the increasing use of lighter-weight materials
such as aluminum and plastics. The trend is likely to continue as
automakers seek to reduce vehicle weight to improve fuel efficiency
and emissions levels.
What are the advantages of high -carbon steel?
1.High -carbon steel heat treatment can obtain high hardness (HRC60
1: 65) and better abrasion resistance.
2.High -carbon steel has better cutability.
3.The raw materials are easy to obtain, and the production cost is
low.
What are the disadvantages of high -carbon steel?
- It has poor thermal hardness. When the operating temperature of the
tool is greater than 200 ° C, its hardness and abrasion resistance
will decrease.
- It has low quenchtability.
The difference between high -carbon steel and low -carbon steel is
as follows:
- Differences of toughness: Low -carbon steel annealing tissue is
iron and small amount of pearl light. Its strength and hardness are
low, and the plasticity and toughness are better. Therefore, its
cold formability is good. High -carbon steel has a high strength
and hardness, high elasticity and fatigue limit after proper heat
treatment or cold pull -out hardening, and the cutting performance
is acceptable, but the welding performance and cold plastic
deformation ability are poor.
- Application differences: Low -carbon steel has good welding. Carbon
content from 0.10%to 0.30%Low -carbon steel is easy to receive
various processing such as forging, welding and cutting, and is
often used for manufacturing chains, rivets, bolts, shafts, etc.
High -carbon steel is mainly used to make spring and wear
-resistant parts. Carbon tool steel is a high -carbon steel that
basically does not add alloy elements. It is also a steel species
with low cost, good hot and cold processing, and wide range of use
of tool steel.
- Different carbon content: Low -carbon steel is carbon steel with
carbon content below 0.25%. Its strength and hardness are low, and
plasticity and toughness are better. 1.70%, the strength and
hardness of bribery, high elasticity and fatigue limit, cutting
performance is acceptable, but the welding performance and cold
plastic deformation ability are poor.
Carbon Steel Tube parameter
chemical composition
material | |
chemical composition | C% | Ni% | Mn% | P% | S% |
0.12 | 3.5-5.5 | 0.5 | 0.35 | 0.04 |
mechanical properties
mechanical properties | Yield Strength | tensile strength | elongation | Hardness |
≧45 | ≧95 | ≧40 | ≦100 |
Our advantage
FLEXIBILITY | MISSION | QUALITY | SERVICE | STABILITY |
MOQ only 200KG, Sheet/Coil | Being your trusted steel expert | 100% quality guarantee, supporting the third-party inspection | Fast Response, Fast shipping & Fast delivery Well-appointed
machining equipments, Own logistics | Long-term & stable material Inventory, Wide variety of material
types & specifications |
Product Inventory
Jiangsu Jinruiheng uses standard export transportation packaging,
according to the size of the stainless steel plate binding steel
belt. According to our shipping experience, a 20-foot container can
hold 22 tons of stainless steel, and a 40-foot container can hold
25 tons of stainless steel. For larger orders, we ship by bulk
carrier, which is cheaper. Packaging can also be customized
according to customer needs.
Packing and Shipping:
DELIVERY SERVICE COMMITMENT:
The goods shall be delivered in strict accordance with the
contract, and the consignee shall be notified within 48 hours after
thegoods are delvered: Loading shall be carried out in strict
accordance with the requlations. without overloading, bias and
weiahtgathering