Boilers Carbon Steel Seamless Tube / Cold Rolled Seamless Carbon Steel Pipe

Boilers Carbon Steel Seamless Tube describe

Boilers carbon steel seamless tubes are specifically designed and manufactured for use in boiler systems. Here's a description of boilers carbon steel seamless tubes:

1. Material: Carbon Steel

   • Boilers carbon steel seamless tubes are made from carbon steel, which is an alloy primarily composed of iron and carbon. Carbon steel offers excellent strength, thermal conductivity, and resistance to high temperatures, making it ideal for boiler applications.

2. Seamless Construction

   • The tubes are manufactured using a seamless construction method. Seamless tubes are produced by piercing a solid billet or ingot of carbon steel to form a hollow tube without any welded joints or seams along its length. This seamless construction provides the tubes with enhanced strength, integrity, and resistance to pressure and corrosion.

3. Boiler Applications

   • Boilers carbon steel seamless tubes are specifically designed for use in boiler systems. They are used as heat exchanger components to transfer heat from the combustion gases to the water or steam within the boiler. These tubes are subjected to high temperatures, high-pressure conditions, and thermal cycling, making them suitable for the demanding environment of boilers.

4. Dimensions and Specifications

   • Boilers carbon steel seamless tubes are available in various dimensions and specifications. The dimensions typically include the outer diameter (OD), wall thickness, and length of the tubes. The specifications may also cover requirements for tolerances, chemical composition, mechanical properties, and testing methods to ensure the quality and performance of the tubes.

5. Properties

   • Boilers carbon steel seamless tubes possess properties that make them suitable for boiler applications. They exhibit excellent thermal conductivity, allowing for efficient heat transfer. The tubes also have high tensile strength, durability, and resistance to corrosion and oxidation at elevated temperatures.

6. Standards and Certifications

   • Boilers carbon steel seamless tubes may conform to various international standards and certifications, such as ASTM (American Society for Testing and Materials) or ASME (American Society of Mechanical Engineers) specifications. Compliance with these standards ensures the quality, safety, and performance of the tubes in boiler applications.

It's important to note that the specific dimensions, tolerances, and properties of boilers carbon steel seamless tubes may vary depending on the manufacturer and the specific requirements of the boiler system. It's recommended to consult the relevant specifications or the manufacturer's documentation for detailed information on the specific characteristics and applications of these tubes in boilers.

Carbon Steel in the Automotive Industry

1. Carbon steel for automobile industry

Carbon steel is one of the most important materials used in the automotive industry. It is widely used in the manufacture of bodywork, engines and other components. The main reasons for its widespread use are its good strength-to-weight ratio, high durability, and low cost.

In recent years, however, the use of carbon steel in cars has been declining due to the increasing use of lighter-weight materials such as aluminum and plastics. The trend is likely to continue as automakers seek to reduce vehicle weight to improve fuel efficiency and emissions levels.

What are the advantages of high -carbon steel?

1.High -carbon steel heat treatment can obtain high hardness (HRC60 1: 65) and better abrasion resistance.

2.High -carbon steel has better cutability.

3.The raw materials are easy to obtain, and the production cost is low.

What are the disadvantages of high -carbon steel?

1. It has poor thermal hardness. When the operating temperature of the tool is greater than 200 ° C, its hardness and abrasion resistance will decrease.

2. It has low quenchtability.

The difference between high -carbon steel and low -carbon steel is as follows:

1. Differences of toughness: Low -carbon steel annealing tissue is iron and small amount of pearl light. Its strength and hardness are low, and the plasticity and toughness are better. Therefore, its cold formability is good. High -carbon steel has a high strength and hardness, high elasticity and fatigue limit after proper heat treatment or cold pull -out hardening, and the cutting performance is acceptable, but the welding performance and cold plastic deformation ability are poor.
2. Application differences: Low -carbon steel has good welding. Carbon content from 0.10%to 0.30%Low -carbon steel is easy to receive various processing such as forging, welding and cutting, and is often used for manufacturing chains, rivets, bolts, shafts, etc. High -carbon steel is mainly used to make spring and wear -resistant parts. Carbon tool steel is a high -carbon steel that basically does not add alloy elements. It is also a steel species with low cost, good hot and cold processing, and wide range of use of tool steel.
3. Different carbon content: Low -carbon steel is carbon steel with carbon content below 0.25%. Its strength and hardness are low, and plasticity and toughness are better. 1.70%, the strength and hardness of bribery, high elasticity and fatigue limit, cutting performance is acceptable, but the welding performance and cold plastic deformation ability are poor.

Carbon Steel Tube parameter

chemical composition

mechanical properties

Our advantage

Product Inventory

Jiangsu Jinruiheng uses standard export transportation packaging, according to the size of the stainless steel plate binding steel belt. According to our shipping experience, a 20-foot container can hold 22 tons of stainless steel, and a 40-foot container can hold 25 tons of stainless steel. For larger orders, we ship by bulk carrier, which is cheaper. Packaging can also be customized according to customer needs.

Packing and Shipping:

DELIVERY SERVICE COMMITMENT:

The goods shall be delivered in strict accordance with the contract, and the consignee shall be notified within 48 hours after thegoods are delvered: Loading shall be carried out in strict accordance with the requlations. without overloading, bias and weiahtgathering