1.3mm Steel Deck Roll Forming Machine 50Hz Corrugated Roll Former

0.8mm - 1.3mm Metal Decking Floor Deck Roll Forming Machine With One Year Guarantee

1. description of ​Floor Deck Sheet Roofing Machine

There are different steel deck roll forming machines manufacturing metal decks for different applications, and the configuration or components of each machine vary accordingly, for example, some deck machine have embossing rolling tools while some others do not. Generally a metal deck or steel deck roll forming machine consists of a 5TON manual de-coiler, feeding guide, an electrical entry shearing with 0.75KW motor power,a roll forming part including an embossing tools, transmission system, hydraulic system, a PLC control cabinet, a hydraulic oil pump and runout tables to support the final products.

2. Advantage of ​Floor Deck Sheet Roofing Machine

1) Adapting to the requirements of rapid construction of the main steel structure, it can provide a firm working platform in a short time,
and can be used to lay the profiled steel plate on multiple floors, and the flow water construction of the layered concrete slab

2) In the use stage, the floor deck is used as the tensile reinforcement of the concrete slab, which also improves the rigidity of the slab
and saves the amount of steel and concrete. The floor deck is generally V-shaped, U-shaped, trapezoidal, and the convex part of the concrete is much less.
Unlike the soil board, it is a flat plate. The floor deck can generally save one-third of the concrete. Now the concrete is expensive.

3) The embossing on the surface of the profiled board creates the greatest bonding force between the floor deck and the concrete,
so that the two form a whole, with stiffening rib, make the floor deck system has high bearing capacity.

4) Under cantilever conditions, the floor slab is only used as a permanent formwork.
The length of the cantilever can be determined according to the section characteristics of the floor panel.
In order to prevent the cracking of the cantilever plate, it is necessary to match the negative reinforcement at the support according
to the design of the structural engineer.
 

3. profile drawing of ​Floor Deck Sheet Roofing Machine

4. details of ​Floor Deck Sheet Roofing Machine