Chongqing Chuke Intelligent Machinery & Equipment Co.,Ltd |
|
Working principle
Laser fiber laser marking machine has a high energy density of the laser beam, the surface of the material being irradiated, the laser energy absorbed by the surface of the material, heat excitation process in the irradiated area, so that the material surface (or coating) temperature rise, resulting Metamorphosis, melting, ablation, evaporation and so on
Laser power | 10W/20/30/50W |
Laser Wavelength | 1064nm |
Light beam quality | <2 |
Repeating precision | ±0.002 |
Marking range | 110x110mm(customize) |
Marking depth | 0.01~1mm |
Marking speed | 7000mm/s |
Minimum character | 0.15mm |
Minimum line width | 0.01mm |
Repeating frequency | 20KHz~30KHz |
Marking content | Graphics, text, bar codes, two-dimensional code, date, batch number, serial number |
Graphic format supported | bmp,png,ai,dxf,dst,plt |
| 220V±10%/50Hz/4A |
Size | 570mmx270mmx200mm |
Gross Weight | 135kg |
Control interface | standard USB port |
Laser module life | 100000~200000 hours |
Application
At present, laser marking has been more and more widely used in 3C industry. Especially with the maturity of fiber laser marking technology nowadays, the performance of fiber laser marking machine in the field of 3C is also more and more outstanding. Performance advantages are becoming an important way to mark the processing of 3C industry. 3C products include computers, tablets, mobile phones, digital cameras and more.
Requirements Working environment (room temperature) Temperature at
18 C -28 C (25 C is the best)
b. It is forbidden to start the laser power supply and Q drive
without water or abnormal circulation
c. Abnormal phenomenon, first turn off the laser power and
galvanometer power, check again
e. Do not allow other components to be started before the krypton
lamp is ignited to prevent the high voltage from entering the
damaged component
f. laser power output does not allow (anode) is vacant to prevent sparking with other electrical appliances, breakdown
g. Keep the circulating water clean, clean the water tank regularly and replace the pure water.
FAQ
laser marking machine how to maintain? Equipment shall not have other debris, the surface of the equipment should be kept clean, the production operator should strictly follow the standard operating procedures for production and operation, non-random operation, equipment, circuit must be grounded to protect the personal safety, preparation and shutdown should be strictly followed open , Shutdown procedures, non-free operation and so on
Design feature
With the third generation of fiber-optic solid-state lasers, the pump light source is coupled through a fiber and the electro-optical conversion efficiency is as high as 80%. The beam quality is higher and the lifetime is longer. The lifetime of the laser can reach 100,000 hours. The air-cooled, Energy saving, the late use of low cost
Product features
Fiber laser marking machine with a high degree of automation, high efficiency, wide range of applications and other performance advantages. Laser cutting plotter equipment used in the processing of the "tool" is a laser beam, laser engraving machine with no wear, non-contact, selective processing, heat-affected area is small, high precision and high repetition rate of processing flexibility, etc. Standard processing known as "the mark will never disappear." Because the laser marking process is not processed directly contact with the product. In addition to the cutting process in the cutting force on the workpiece has no effect, processing speed, no noise, no pollution, laser cutting plotter to achieve "green processing" requirements.
Packing and shipping
Packing in wooden case,95*81*122cm The machine gross is 1-188KG, you can use express delivery. If more than 75KG, you can choose sea transportation.
Aftersale service
1.3 year guarantee,providing free technical support.
2.During the warranty period, Warranty period, the required parts
after the non-human damage free replacement,the freight is borne by
us.
3.Machine has been adjusted before delivery, operation instructions
is included in the delivery. If there is any other questions, pls
kindly tell us.
Chuke Factory
Chuke is a famous brand of marking machine in China. Zixu Machinery
Factory is one of the largest production bases for marking needles
in China. The company is located in Beibei District, Chongqing City
and was established in 2006. In addition to producing pneumatic
marking needles, the company also autonomously R & D laser
marking machine, pneumatic marking machine, marking machine, and
its accessories.Purple Asahi Machinery Factory is a technology,
industry and trade companies, enterprises contract and keeping
promises. The company's existing production and sales of more than
60 people, 10 were in professional and technical workers, the
company occupies 3,000 square meters, with large-scale production
of complete sets of equipment, marking machine design, manufacture,
quality inspection, performance testing with strong technical force
and production capacity.
Set all kinds of professional and technical elite, with the marking
machine industry-leading technical force, purple Xu so that each
marking machine to do fine, fine, new standards, only one thing to
do 10 years, focusing on marking machines and The production of its
accessories.