Active Member
|
[China]
Address: No. 17, Yunyi Road, Golden Dragon Lake Industrial Park, Beibei, Chonqing, China
Contact name:
Chongqing Chuke Intelligent Machinery & Equipment Co.,Ltd |
|
|
Working principle
Burn out some of the material through light energy, and show the patterns, characters, bar codes, and so on.
Laser power | 10W/20/30/50W |
| Laser Wavelength | 1064nm |
| Light beam quality | <2 |
| Repeating precision | ±0.002 |
| Marking range | 110x110mm(customize) |
| Marking depth | 0.01~1mm |
| Marking speed | 7000mm/s |
| Minimum character | 0.15mm |
| Minimum line width | 0.01mm |
| Repeating frequency | 20KHz~30KHz |
| Marking content | Graphics, text, bar codes, two-dimensional code, date, batch number, serial number |
| Graphic format supported | bmp,png,ai,dxf,dst,plt |
| 220V±10%/50Hz/4A |
| Size | 570mmx270mmx200mm |
| Gross Weight | 135kg |
| Control interface | standard USB port |
| Laser module life | 100000~200000 hours |
Application
The packaging industry and the electronic communications industry of the mobile phone shell, electronic components
About avoiding condensation Prevention of laser crystal and LD
cavity surface condensation
The laser system is forbidden to work in a high humidity
environment, and the customer should ensure that the ambient
humidity is less than 60%. When the temperature difference between
the laser crystal and the ambient temperature is too large (greater
than 10 degrees), it will lead to the condensation of laser
crystals. Condensation will lead to the decrease or damage of the
power of the laser system. Therefore, when the ambient temperature
is far greater than the set temperature of the water tank (greater
than 10 degrees or more), it is strictly prohibited that the laser
system is in a single boiled water cooler and the laser head is not
working. In this state, the following steps are recommended.When
starting, open the chiller first. When the temperature of the
refrigerator is below 30 degrees, start the power and slow the
current to about 10A. When the temperature of the cooler is
displayed at the working temperature (18 C or so), the current will
be adjusted to about 35A.In the shutdown, the current slows down to
about 10A and stops the power output, closes the power supply, and
then closes the water cooler as soon as possible. If the work is
not done at the maximum current, the cooling temperature of the
refrigerator can be adjusted to a higher temperature (but not
higher than 25 degrees). We must use laser system equipment in the
specified environment (the South operation environment should be
equipped with air conditioning).
Laser processing ,no interaction force between workpiece. It has the advantages of no contact, no cutting force and little heat influence.ensures the original accuracy of workpiece. At the same time, can mark on variety of materials surface very good and be durability
.
FAQ
What is the laser marking machine without laser output? When this problem arises, we usually exclude the following several steps to solve the problem and let the laser marking equipment return to normal as soon as possible and produce normally.The first step is to see if it is possible to make a mistake in the laser marking machine. If it is, turn off the machine and try it again.
The second step: a careful observation of what abnormal laser marking equipment has. The abnormal content mainly includes the following: the work of the voice, such as vibration lens voice, voice alarm control box, the sound of the equipment itself, as well as the semiconductor laser marking machine water machine alarm sound; abnormal voltage, simple to use a multimeter to measure voltage, generally low, can also cause no laser; computer software and computer are poisoning, slow boot, and boot parked in an interface for a long time move.
Design feature
Laser's space control and time control are very good. It has great freedom to process object's material, shape, size and processing environment. It is especially suitable for automatic processing and special surface processing. And the processing mode is flexible, which can meet the needs of the single design in the laboratory, and also meet the requirements of the industrial mass production..
Product features
works well in An abominable working environment, with high tolerance to dust, shock, impact, humidity, and temperature 2.No thermoelectric cooling and water cooling, only simple air cooling
Packing and shipping
We supply by sea, more cheap for big machine shipping
Aftersale service
High quality and quick technical service
Chuke Factory
Chongqing early carved Intelligent Machinery Equipment Co., Ltd. is a famous brand of Chinese marking machine. The purple Xu Machinery Factory is one of the largest marking production bases in China. The company is located in Beibei District of Chongqing, founded in 2006. In addition to the production of pneumatic marking needle, the company also independently developed the laser marking machine, pneumatic marking machine, electric marking machine, and its accessories.
