Active Member
|
[China]
Address: Block 1, Beihuayuanjie, Chaoyang, Beijing 100024, China; market@sinosteelengineering.com
Contact name:
BEIJING SINO STEEL ENGINEERING & EQUIPMENT CO., LTD. |
|
|
Tungsten Carbide Roll Rings ribbing roll profiling and forming
rebars bars wires
Tungsten carbide ribbing rollers are widely used in steel/rebar works for profiling and forming rebars/bars/wires.
Due to its high density(13.9—14.2g/cm3),high T.R.S(2500-3200N/mm2) and good wear resistance(hardness 82-86HRA,service life is more than 15 times of traditional steel rolls.
Carbide ribbing rollers are more and more popular in reinforcement production field,your specific enquiry will be more than welcome.
1.Sales staff beyond 5 years' in this field with good understanding and fluent english.
2.Prompt reply within 24 hours with experienced suggestions.
| No. | Specifications | OD(js7) | Inner hole | Thickness(js9) | / / | Radial runout | Face runout | Inner hole 0 (6 class) // | □ | Chamfer | Blank Type | |
| Inner hole | Outer circle | |||||||||||
| 1 | G155NE345 | Φ155.68±0.02 | Φ87.31 | 69.95±0.03 | 0.01 | 0.013 | 0.01 | 0.006 | 0.01 | 1.5×45° | 3×45° | GH155B |
| 2 | G156NA106 | Φ1.56.28±0.02 | Φ87.32 | 69.9±0.037 | 0.01 | 0.013 | 0.01 | 0.006 | 0.01 | 1.5×45° | 10×1 | GH156B |
| 3 | G156NA106A | Φ156.28±0.02 | Φ87.32 | 57.25±0.037 | 0.01 | 0.013 | 0.01 | 0.006 | 0.01 | 1.5×45° | 10×1 | GH156C |
| 4 | G158ND530 | Φ158.75±0.02 | Φ87.313 | 62.9±0.037 | 0.01 | 0.013 | 0.01 | 0.006 | 0.01 | 1.5×45° | 8.5×5 | GH158C |
| 5 | G158NA106 | Φ158.75±0.02 | Φ87.313 | 70±0.037 | 0.01 | 0.013 | 0.01 | 0.006 | 0.01 | 1.5×45° | 10×1 | GH158B |
| 6 | G170NE145 | Φ170.66±0.02 | Φ94 | 57.3±0.037 | 0.01 | 0.013 | 0.01 | 0.006 | 0.01 | 1.5×45° | 1×45° | GH170A |
| 7 | G170NE145A | Φ170.66±0.02 | Φ94 | 70±0.037 | 0.01 | 0.013 | 0.01 | 0.006 | 0.01 | 1.5×45° | 1×45° | GH170B |
| 8 | G173NE145A | Φ173±0.02 | Φ95 | 69.05±0.037 | 0.01 | 0.013 | 0.01 | 0.006 | 0.01 | 1.5×45° | 1.5×45° | GH173A |
| 9 | G178NE145A | Φ178.3±0.02 | Φ94.7 | 62.3±0.03 | 0.01 | 0.013 | 0.01 | 0.006 | 0.01 | 1.5×45° | 1.5×45° | GH178A |
| 10 | G180NE145A | Φ180±0.03 | Φ110 | 55 | 0.01 | 0.013 | 0.01 | 0.006 | 0.01 | 1.5×45° | 1.5×45° | GH180A |
| 11 | G186NE345 | Φ186 | Φ87.315 | 71.95±0.03 | 0.01 | 0.013 | 0.01 | 0.006 | 0.01 | 1.5×45° | 3×45° | GH186A |
| 12 | G206NA106 | Φ206.4±0.023 | Φ120.65 | 71.9±0.037 | 0.01 | 0.013 | 0.01 | 0.008 | 0.01 | 1.5×45° | 10×1 | GH206A |
| 13 | G206NA106A | Φ206.65±0.023 | Φ120.66 | 71.7±0.037 | 0.01 | 0.013 | 0.01 | 0.008 | 0.01 | 1.5×45° | 10×1 | GH206A |
| 14 | G208NE345 | Φ208±0.023 | Φ110 | 71.95±0.037 | 0.01 | 0.013 | 0.01 | 0.006 | 0.01 | 2×45° | 3×45° | GH208A |
| 15 | G208NS314 | Φ207.97±0.023 | Φ126 | 65.46±0.037 | 0.01 | 0.013 | 0.01 | 0.008 | 0.01 | 1.5×45° | 1.5×45 12.5×3 | GH208B |
