Wuhan Linxuan Laser Co., Ltd |
|
Fiber laser cutting machine is designed for cutting of the laser equipment, applicable to all types of metal (including precious metal), plating materials, coating materials, coating material and sheet cutting. Stable and reliable operation of the equipment, processing good quality, high efficiency, simple operation and easy maintenance.
1. Gas components imported from Germany Rexroth, AirTac and so on
2. Flexible: nitrogen, oxygen, air free choice
3. Low pressure cutting pressure is automatically controlled by the
proportional valve
4. Help improve the cutting process and high-quality cutting
quality
5. Special processing capacity: iron angle / thick plate holes
6. Reduce the manual adjustment work, improve production efficiency
30% to 50%
7. Save 20% to 40% gas consumption
Fiber laser cutting machine is for metal precise cutting powered by
fiber laser technology. The quality fiber laser beam results in
faster cutting speeds and higher quality cuts compared to other
cutting solutions. The key advantage of a fiber laser is its short
beam wavelength (1,064nm). The wavelength, which is ten times lower
than that of C02 laser, generates high absorption into metals. This
makes the fiber laser become a perfect tool for cutting metal
sheets of stainless steel, carbon steel, mild steel, aluminum,
brass, etc.
The efficiency of a fiber laser far exceeds traditional YAG or CO2
laser. The fiber laser beam is capable of cutting reflective metals
with much less energy as the laser is absorbed into the metal being
cut. The unit will consume little to no energy when not active.
Another advantage of fiber laser is the use of highly reliable
single emitter diodes with projected lifetimes greater than 100,000
hours of continuous or pulsed operation.
ACCURL Laser software allows for the capability to control power,
modulation rate, pulse width and pulse shape giving the user full
control of the lasers capabilities.
Laser power | 750W |
Processing range | 3000mm*1500mm |
X-axis stroke | 3050mm |
Y-axis stroke | 1530mm |
Z-axis stroke | 100mm |
X/Y-axis positioning accuracy | ±0.03mm /m |
X/Y-axis worktable repeating positioning accuracy | ±0.02mm |
X, y axis max. linkage speed | 110m/min |
Max. acceleration | 1.2G |
weight | 4800Kg |
The workbench max. load | 400Kg |
The whole machine covers an area of | 4800mm*4800mm |
Main power supply protection rating | IP54 |
Cooling | Water cooling |
1. Standard plywood case, its compressive strength and bearing
quality is better.
2. the board area is bit, the soil structure is good, it is better
in leakproofness and waterproof.
3. when importing, the plywood case is with fumigation-free, the
procedure is simple.
4. Delivery Detail: within 20-25 days after received your
payment.