Moisture Proof Warming Brightening Metalized PE Film For Greenhouse

Reflective film for agricultural fruit trees Reflective film greenhouse for warming and brightening apple grape orchard

Laying method
For the orchard where the canopy will be handed over, it is recommended that the whole garden be covered with reflective film. Spread along the tree line on both sides of the canopy, the outer edge of the reflective film is flush with the outer edge of the canopy. When laying, place the rolled reflective film on one end of the orchard, and then unfold it while pressing the film with stones, bricks or rope. You can also lift the sticks used to support the branches on the film. Be careful not to puncture the film when pressing the film.
Management after coating
Check frequently after laying the film. When it is windy or rainy, the film that has been blown up by the wind should be re-leveled in time, and the mud, fallen leaves and water on the film should be cleaned up to ensure the use effect.
Precautions
1. When laying the reflective film, it should be high inside and low outside, so that rainwater can flow between the rows. If there is water on the film surface after rain, pay attention to sweeping away the water in time to facilitate reflection.
2. It is not suitable to use soil for pressing film to prevent staining the reflective film and affecting the reflective effect.
3. The film surface cannot be pulled too tightly to prevent the reflective film from shrinking and breaking when the temperature drops.

Application

The function of aluminum plating on the surface of the film is to shading and prevent ultraviolet radiation, which not only extends the shelf life of the contents, but also improves the gloss of the film. To a certain extent, it replaces the aluminum foil. It also has low price, beautiful appearance and better barrier properties. Therefore, the application of aluminized film in composite packaging is very extensive, currently mainly used in biscuit packaging, soy milk powder packaging, pet food packaging, fast food packaging, tea packaging, coffee packaging, puffed food packaging, and some pharmaceutical and cosmetic outer packaging on.

Product Specification

Company brief introduction

Our factory specializes in selling PET aluminized film, color film, transparent film, polyester color film, and undertakes external processing of PET, OPP, PVC and other film materials. We are based on honesty, professionalism, high quality and low price. We insist on customer-oriented, take consumer satisfaction as the highest criterion, continuously improve the quality of service, and deliver goods for you on time. Products are widely used in packaging, printing, frosting, laminating, etc.

FAQ

1.Are you trading company or manufacturer?

We are manufacture 
2.Do you provide samples? Is it free or extra?

Yes , we could offer the sample for free charge but the express cost will be covered by receiver.
3.What is your delivery time ?

The delivery time is normally 15 days.
4.Can you accept mixed products in one container?

Yes , we accept for sure.
5.What is your MOQ?

The MOQ of hot stamping foil is 200 standard rolls ,and the lamination film /hologarphic film is 300KGS for each kind metallized film .
6. What is your payment terms?

Payment ,30% in advance ,balance amount should be paid before shipment.

Product Show