|
[China]
Trade Verify
Address: Room A1112,Nanxincang Building,No.22 Dongsishitiao Street,Dongcheng District,Beijing,China ZIP
Contact name:james.zhou
Beijing Xunengsun Technology Corporation |
|
Verified Suppliers
|
|
|
Impaling clips are used to easily attach Acoustic Panels (703 /705
Board) to walls. Each clip has 8 spikes that stick into the
fiberglass panel backing and hold the panel in place. The
dimensions of the clips are 2-1/8" x 1-1/2". The impaling clips are
installed on the wall by either 1 drywall screw (not included) or
attached with adhesive (Multi-Seal 180). 4-6 impaling clips are
recommended per standard 2' x 4' panel making sure one impaling
clip is placed in each corner. For panel applications requiring an
air gap, wood spacer blocks can be installed between the acoustic
panel mounting hardware and the drywall to keep the panel spaced
off of the wall.
TECHNICAL INFORMATION:
Size: 1-1/2″ x 2″
Depth: 5/8″
Impaling Clip 8 prong with center hole Size: 1-1/2 in. x 2-1/8 in.
Composition: Extruded metal
Intended use: To be used in conjunction with construction adhesive
when installing fiberglass acoustical panels.
Packing: Box of 100
INSTRUCTIONS:
1. Determine the location of your panel and have one person hold it
up in place while the other person makes a light mark on the wall
to show all 4 corners.
2. Attach 4 Impaling Clips approx 3" off each corner edge and an
optional 2 more impaling clips 3" in from the edge of the center of
the panel. Acoustic panel mounting hardware should be screwed into
the studs, so moving the clips a little to hit a stud is
recommended. If screwing into a stud is not possible, use a drywall
anchor type screw to ensure a proper hold.
3. For permanent placement, use adhesive on the wall to stick the
back of the panel to the wall (adhesive such as Multi-Seal 180 is
recommended).
Safe,efficient and reliable packing.
TIME IS GOLD for you and for us. We have very professional delivery
and we can feedback your inquiry quickly.
91.8% Response Rate
91.8% Response Rate
91.8% Response Rate
SUREALONG offers full service stamping, fabrication, and finishing
of metal components
Our 52,000 square meter facility is located in Hebei, nearly 1 hour
to Tianjin port then shipping parts across the globe, on time and
on budget.
120 SUREALONG person (5 engineers, 10 technicians)engage in metal
production, and with 15 year's experience for customer.
T:+86 10 87338783
M:+86 166 0113 0879
WECHAT/WHATSAPP: +86 166 0113 0879
QQ: 3285716899
SKYPE: janelei5
Email: summer @surealong.com
Website:www.xunengsun.en.alibaba.com
http://www.surealong.com/
Add:Room 918, Yu Fei Building, Dongzhimen Street No. 42, Dongcheng
District, Beijing, 100056, P.R. China.
Q:For your timber connector, what's material will be used?
A: Our commonly used materials are DX51D-Z275 galvanized sheet for this product (We also accept custom material service and purchase materials according to customer's requirement.)
Q:What's the thickness of your product?
A: In general,our Nail plates are likely to be in thickness of 1 mm
. IN view of we are factories, we provide customized service to our
customers such as 2 mm, 2.5 mm and 3 mm We can do the production
according to the customers' reasonable requirements.
Q: How many years has your factory been in the field of wooden
building fittings? How about the machines and equipment?
A: We have been in this field for 15 years, and we have 5
engineers, 10 technicians, and 120 employees; We have a variety of
stamping machine equipment, punch tons of a variety of types, can
meet the needs of customers;This year we have expanded the new
plant and the building. The building has been put into use and the
construction area has reached 5000 square meters, We warmly welcome
you to visit our factory and establish a cooperative relationship
with you.
Q: Can you make the complete set of wooden construction
fittings?
A: Of course, we can produce a full set of wooden construction
metal fittings, If I have the chance, I'd like to invite you to
visit our production workshop and samples.
