Industrial Single And Double Layer Scrap Radiator Recycling Machine

Industrial Single And Double Layer Scrap Radiator Recycling Machine

The separator machine is used to cut radiators from air conditioners and separate copper pipes from aluminum. Before processed by this machine, the radiators shall be cut with a band saw into pieces of certain width.When radiators are more than 2 layers, a band saw is needed to cut them into one layer or two layers.

Application of Aluminum copper radiator separator:
Automatic Small scrap radiator fin copper tube aluminum strip cutting separator machine can strip and separate copper from aluminium in waste air condition radiator, waste water tank directly, easy to operate

Features of Radiator recycling machine:
TF-16 waste radiator separator is an environment-friendly equipment,used for separating copper pipes from aluminum,Designed and manufactured by us ,this machine is a newly-designed compact one ,taking up small area. Little materials will be lost during processing , so this machine is practical and economical.

Advantages of Radiator recycling machine:
1. Humanized design, easy to operate.
2. High efficiency, separation within seconds.
3. Labor saving, use automatic recycling instead of labor working.
4. No damage to copper pipes, no copper loss, practical and economical.

Specifications of Radiator recycling machine:

Working procedure of Radiator separator:
1. Turn the Reversing Switch and check the rotating direction.
2. Inject oil into the two oil holes in the left and right side of the machine to lubricate transmission gears (normally once per 4 working hours).
3. Push different radiators into different Material Inlets according to their specs (19mm, 21mm, 25mm); the left side of radiators must touch the left side of Material Inlets; or, the right side of radiators must touch the right side of Material Inlets (the first copper pipe in the Lower Layer shall be nearer to the Guiding Ruler, different with 5.6); when radiators are pushed into Material Inlets, Feeding Gears will gnaw at radiators and take them into the machine.
4. After radiators are taken into the machine, copper pipes and aluminum are separated and come out of the machine automatically.
5. According to the layers of radiators and their height, adjust each pair of Adjusting Wheels on the machine (after adjusting, tighten screws below).

We also supply Complete Recycling Line for Compressed radiator.

FAQ:

Q:What’s the spare parts of the separator?
A: Spare parts of the separator are blades and belt, we will supply extra parts according to customers’ requirement.

Q:What’s the warranty time for the equipment?
A: 12 months. During the warranty period, if there is any problem due to quality,we will supply spare parts for free, and customers take charge of delivery cost.

Q:What’s ordinary delivery time of the separating machine?
A: Within 12 working days.