|
[China]
Trade Verify
Address: 500 M North of Taicheng Industrial Area, Anping County,Hengshui City,Hebei Province.China.
Contact name:Jack Zhang
Anping Dixun Wire Mesh Products Co., Ltd |
|
Verified Suppliers
|
|
|
Mesh Width 2m Mesh Length 6m PLC Steel Wire Mesh Welding Machine
Introduction Of Steel Wire Mesh Welding Machine:
1. Pre-cut of line wire and weft wire, line wire feeding by manual, weft wire feeding by automatic alignment.
2. Each welding electrode is controlled by one SMC(Japan) air cylinder. So the welding points are even. One copper wire connects one welding electrode. (Single wire connection). The welding electrodes will not affect each other.
3. Both of upper and lower electrodes are water cooling, to reduce the temperature of welding electrode.
4. New Pneumatic welding for stronger welding, smoother mesh and faster speed.
5. The pulling system with a servo motor pulls the mesh panel more accurately and intelligently.
6. The machine is made of thick steel plate and profile steel, high strength, high toughness, main structure is more solid.
7. The welding adopts separate-control technology, making the welding transformers working separately to reduce the capacity requirement of power transformer and reduce the impact current.
8. The circuit module is designed by our engineers and university professors, not be easily broken. The welding spark is less.
9. The cross wire space adjustment adopts PLC micro-computer control, set on the touch screen.
10. The mesh pulling system in cycle is automatically calculated, no need manual setting. The mesh pulling car can be back to origin automatically after finishing the pulling.
11. When there is malfunction on the machine, the PLC will alarm, which is convenient to adjust the machine.
12. The power transformer must be at least 120KVA to supply machine running and the distance between the power transformer and the machine within 100 m.
13. Material:Suitable for low carbon wire, galvanized wire, ribbed wire.
Technical Parameters of Steel Wire Mesh Welding Machine:
| Model | DX-GWCD-2000 | DX-GWCD-2500 |
| Wire diameter | 3-6mm | 3-6mm |
| Mesh width | 2000mm | 2500mm |
| Mesh length | 6000mm | 6000mm |
| Longitudinal wire space | 50-250mm | 50-250mm |
| Cross wire space | 50-300mm | 50-300mm |
| Number of welding electrode | 40 PCS | 50 PCS |
| Rated capacity | 160KVA*5PCS | 160KVA*6PCS |
| Main motor | 5.5kw | 5.5kw |
| Welding speed | 40-60 times per min | 40-60 times per min |
| Cross wire type | pre-cut | pre-cut |
| Longitudinal wire type | pre-cut | pre-cut |
| Machine weight | 4500kg | 5500kg |
| Power Supply | 120KVA | 120KVA |
| Floor space | 20*5m | 20*5m |
Applications of Steel Wire Mesh Welding Machine:
This steel wire mesh is widely used in railway, highway, bridge high-rise building, stadium, court, airport, workshop isolation mesh welding, this machine is widely used in railway, highway, bridge high-rise building, stadium, court, airport, workshop isolation and so on.
Photos of Steel Wire Mesh Welding Machine:
