Active Member
|
[China]
Address: Economy and Technology Developing Zone, Huanghua City, Hebei Province, China
Contact name:Liu
Huanghua Fangzheng Welding Equipment CO., Ltd |
|
|
Full-Auto Online Bending Fence Mesh Welding Machine
In order to meet the needs of your business development, reduce labor costs and improve production efficiency, Fangzheng Company will customize the following equipment in combination with your existing conditions and needs to meet the efficient production of wire mesh
The device is to feed the long wires. And it is also the necessary
part in the whole line.
1. Long wires are pre-cut. The pre-cut wires are sent into the wire
plucking section from storage area under the drive of motor. After
inspection, wire catching plate can send wires (one piece once
Time) on the position of the long wire feeding car. Then the long
wire feeding car carrying the long wires go to the welding machine.
2. This device is equipped with an inspecting device. If none of
long wires drops, the device will alarm automatically. After
adjusting by worker, the machine will continue producing, which
greatly decrease the damage of equipment and meshes.
3. Materials area is equipped the positioning device to store the
wires with different lengths.
| Product type | DNW-33QB Full-auto Type |
| Working speed max. | 40-60Times/Min. |
| Width range of wire mesh | ≤ 3300mm |
| Length range of wire mesh | ≧1000mm |
| Longitudinal wire spacing | ≧50mm variable from mm it can be adjusted |
| Cross wire spacing | ≧50mm Freely programming adjustments |
| Cross wire diameter | 3-6mm |
| Max. welding capacity | 6+6mm |
| Welding wire material | low carbon steel galvanized wire; cold drawn wire; Apply to clean wires whose surface are without excessive oxides, foreign matter, moisture |
| Number of max. welding spot | 51PCS/ROW |
| Longitudinal wire feeding method | pre cut in |
| Cross wire feeding method | pre cut in |
| Control method | PLC programming control, servo stepper system |
| Transformer power | 160KVA*9 Cooling water: each transformer has a separate microcomputer |
| The Allowed Fluctuation Range for External Power | ±10% |
| Air consumption pressure | 0.6-0.8Mpa 3.4m³/minute |
| bending | online bending finished on one time |
1. The resistance welding transformers of the equipment are all
controlled by microcomputer, and the welding electronic control
adopts the method of one-time welding group power transmission,
that is, when welding the same row of transverse bars, the welding
transformers work separately, which makes the welding more
reliable, more stable, faster and more intelligent; the welding
splash is small, which reduces the burn degree of the welding point
and prevents the thermal deformation of the mesh.
2. The control cabinet is equipped with cooling device, which can
bring a good working temperature to the whole control cabinet.
3. The welding resistance controller is customized by professional
manufacturer.
the long wire and cross wire are pre-cut in, the bending will be finished in one welding line.
