Home Companies Huanghua Fangzheng Welding Equipment CO., Ltd

Double Fence Panel Welded Wire Mesh Welding Machine For 2500mm

Huanghua Fangzheng Welding Equipment CO., Ltd
Active Member

Contact Us

[China] country

Address: Economy and Technology Developing Zone, Huanghua City, Hebei Province, China

Contact name:Liu

Inquir Now

Huanghua Fangzheng Welding Equipment CO., Ltd

Double Fence Panel Welded Wire Mesh Welding Machine For 2500mm

Country/Region china
City & Province hebei
InquireNow

Product Details

Double Wire Fence Panel Wire Mesh Welding Machine

Optional equipment:
Straight cut-off machine, air compressor, gas storage tank, cold dryer, air source purification equipment.

1 The welding gas storage device is equipped with air filtration devices and oil filter device, which can greatly increase the service life of pneumatic components of the equipment.

2 The improvement of design of welding transformers meets the demand to weld continuously wires of 8+6+8mm at a high speed at the moment when saving energy
3 The machine is mainly used for welding building mesh and road and bridge construction.

 

ItemNameQTYUnit
1Welding machine1SET
2Welding Control System1SET
3Servo Control System1SET
4Servo stepping device1SET
5Cross Wire Auto-Feeding System1SET
6Long wire loading frame1SET
7Mesh traction platform1SET
8Long wire feeding car device1SET
9Automatically stacking device1SET
10Mesh transportation car1SET
11spare part case1PCS
12Equipment operation and maintenance manual1COPY

 

8 + 6 + 8mm Double Wire Fence Panel Wire Mesh Welding Machine long wire feeding car

 

Manually put the pre-cut long wire into the position hole , start the 8 + 6 + 8mm Double Wire Fence Panel Wire Mesh Welding Machine button and the pneumatic clamp will clamp the wire tightly, then the stepping motor will drive the wire to be welded by welding host.

 

Later the 8 + 6 + 8mm Double Wire Fence Panel Wire Mesh Welding Machine mesh traction car will pulling the mesh by going there and back. When welding the second mesh, the feeding car will back to the original point and still for preparing the wires of the second mesh. As soon as the first mesh is finished, it will work again and followed by recycling. There is no need to stop the welding machine, which improves the welding efficiency.

 

The whole set of 8 + 6 + 8mm Double Wire Fence Panel Wire Mesh Welding Machine is composed of machine rack, feeding car, clamping device and transmission device.

 

Hot Products

Chicken Cage High Speed PLC Control Wire Mesh Welding Machine The whole equipment adopts PLC ...
Construction Mesh Panel Welded Wire Mesh Machine According to the length of the product, the number ...
Mesh Spacing Programming Control Welded Wire Mesh Machine The overall equipment adopts PLC ...
Fence Panel 3D 2500mm Width Wire Mesh Weling Machine the long wire and cross wire all can be coil ...
Double Wire Fence Panel Wire Mesh Welding Machine Optional equipment: Straight cut-off machine, air ...
High Efficiency 3D Fence Panel Welded Wire Mesh Machine There is some spare parts need to be moved ...