|
[China]
Trade Verify
Address: 101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Contact name:June Zhao
Shenzhen Merrytek Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Microwave Motion Sensor Designed for Slim Lights with Large
Detecting Area MC095S
for slim lamps like ceiling lights, tri-proof lights, linear lights
and batten, etc
1. Features
2. Parameter
| Input | Operating Voltage Range | 198-264VAC 50/60Hz |
| Rated Voltage | 220-240VAC 50/60Hz | |
| Stand-by Power | ≤0.5W | |
| Surge Test | Between L and N: 1KV | |
| Output | Working Mode | ON/OFF |
| Type of Load | Resistive or Capacitive | |
| Load Capacity | 400W@230VAC(Capacitive), 800W @230VAC(Resistive) | |
| Load surge current | 30A relay - 30A (test twidth 500us @230Vac at 50% Ipeak, cold start at full load) or 60A (test twidth 200us @230Vac at 50% Ipeak, cold start at full load) | |
| Sensor | HF system | 5.8 GHz ±75 MHz, ISM wave band |
| Transmitting power | 0.5mW Max. | |
| Hold time | 5S/30S/1min/3min/5min/10min | |
| Detection area | 100%/75%/50%/25% | |
| Daylight sensor | 2Lux/10Lux/30Lux/50Lux/Disable (Diffusion state) | |
| Detecting Radius | Motion detection:>4m@0.3m/S, >2.5m@1m/S (Installed at 3m high ) | |
| Mounting Height | 1-5m | |
| Detecting Angle | 150° | |
Operating Environment | Operating temperature | -20℃…+50℃ Humidity: 85% (non-condensing) |
| Storage temperature | -40℃…+80℃ | |
| Certificate Standards | Safety standards | EN61058-1, EN61058-1-2 |
| EMC standards | EN55015, EN61547, EN61000-3-2, EN61000-3-3 | |
| Environmental Requirement | RoHS | |
| Certificate | CE RED | |
| Others | Input/output terminal specifications | 0.75-1.5mm2 |
| IP Rating | IP20 | |
| Protection Class | Class II | |
| Installation | Built-in installation | |
| Dimension | 100L*26W*21H(mm) | |
| Package | Bubble bag + partition + outer box (K=A) | |
| Net Weight | 36g | |
| Lifetime | 5 years warranty @Ta 230V full load |
3. Function
On/OFF Function
4. Dimension (mm)
5.Wiring
*The sensor is designed for connect one load only. Connect more
than one loads may damage the sensor.
6.Structure
7. Radiation Pattern
Ceiling mounting:
Notice:
*50%, 75%, 100% detection sensitivity is workable when installed at
6m mounting height. Only 25% sensitivity is not able to detect
motion signal.
Wall mounting:
Notice:
The data on detection pattern is typical value tested without any lighting fixture in Merrytek factory, the detection range could be affected by moving speed, installation height, motion object and different environment.
8. Function Dialing Settings
9. Initialization
After power on, the sensor automatically turns on light at 100%
brightness. After 10sec, it turns off the light. During the
initialization, the sensor is not able to detect movement.
10.Factory settings
Detection Area: 100%, Hold Time: 5S, Daylight Sensor: Disable
11.Application Notice
1) This product is only used indoors and supports built-in (lamp)
installation.
2) When installing multiple products, it is recommended that the
distance between each product is> 2m.
3) The microwave will penetrate the wooden wall when used in a
wooden room, and cause false trigger when a human body moves in the
next room. If this happens, please lower the detection area
sensitivity.
4) Microwave cannot penetrate metal. Avoid installing the product
in a closed or semi-enclosed metal lamp, and the product antenna
cannot be covered by metal plates, glass and other objects with
high dielectric density; the obstruction (non-metal /glass) should
keep a distance of 15mm or more.
