|
[China]
Trade Verify
Address: 101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Contact name:June Zhao
Shenzhen Merrytek Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
DALI2 DT8 compatiable 26W Constant Current LED driver
【Product Feature】
【Parameter】
| Input | Operating Voltage | 198-264VAC 50Hz /60Hz | ||||||
| Rated Input Voltage | 220-240VAC 50Hz /60Hz | |||||||
| DC Input Voltage range | 200-240VDC | |||||||
| Input Current | 0.14A Max. | |||||||
| Input Inrush Current | <15A (Half current pulse width 100US) @230VAC | |||||||
| Power Factor | ≥0.95 @230VAC (Full load) | |||||||
| Total harmonic distortion | Typical: 15% (@230Vac, 100% load) | |||||||
| Stand-by Power | ≤0.5W(@230Vac) | |||||||
| Efficiency | 86%Max. @230VAC (Full load) | |||||||
| Wiring Method | Push terminal, wire cross section:0.5-1.0mm2 | |||||||
| Loop-in&Loop-out quantity | NO | |||||||
| Automatic circuit breaker (Calculate current in the wire) | type | B10 | B13 | B16 | B20 | B25 | ||
| Number | 35 | 45 | 56 | 65 | 85 | |||
| type | C10 | C13 | C16 | C20 | C25 | |||
| Number | 22 | 28 | 35 | 45 | 58 | |||
| Output | Operating mode | Constant Current | ||||||
| Load type | LED | |||||||
| Ripple requirement (Flickering or flickering-Free) | Flicker value: less than 2% for whole dimming range | |||||||
| Start up time | <0.7s (@230Vac) | <0.5s (@ DC Input) | ||||||
| No-load output voltage | 60VDC Max. | |||||||
| Load output voltage range | 12-43VDC | |||||||
| Full load output power | 26W Max. | |||||||
| Load output current | 300~600mA : For details<Current gear setting> | |||||||
| Constant current/voltage Precision | Constant Current Precision ±5% | |||||||
| Wiring method | Push terminal, wire cross section:0.5-1.0mm2 | |||||||
| Control Method | Primary PUSH Dimming | Primary PUSH dimming (Max.lead length:20M) | ||||||
| 1-10V Dimming | NO | |||||||
| Dimming Range | Primary PUSH & DALI dimming: 0%-100% | |||||||
| Potentiometer | NO | |||||||
| DALI Dimming | DALI dimming (Max.lead length:300M) | |||||||
| Exception Protection Requirements | Output over temperature protection | Yes, without self recovery function(Can be inquired) | ||||||
| Output short circuit protection | Yes, without self recovery function(Can be inquired) | |||||||
Operating Environment | Operating temperature/ humidity | -25℃~50℃ Humidity:85% (Non-condensing) | ||||||
| Storage temperature/ humidity | -40℃~80℃, Humidity:10%–95% | |||||||
| Max. case temp(Tc) | 85℃ | |||||||
Safety & EMC | EMC standard | EN55015 EN61547 EN61000-3-2 EN61000-3-3 | ||||||
| DALI protocol standard | IEC62386-101 / 102 / 207 DT6 / 209 DT8 / 220 DT19 | |||||||
| Safety standard | EN61347-1 EN61347-2-13 | |||||||
| Certification | CE | |||||||
| Withstand voltage | 3750Vac, 5mA, 60s (Input “L N”- Output “SEC”) | |||||||
| Others | IP Rating | IP20 | ||||||
| Type of protection | Class II | |||||||
| Built-in installation | 96*42.5*24mm | |||||||
| Independent installation | 136*42.5*24mm | |||||||
| Blackout memory function | Yes, PUSH blackout memory | |||||||
| PUSH dimming synchronization | 20 units Max. | |||||||
| Packaging requirement | white box+ Instructions Clapboard Outer Carton(K=A) | |||||||
| Weight | 135g | |||||||
| Life | 5 year @Ta full load | |||||||
| Note: All parameters are tested at the input voltage of 230Vac and 25 degree environment unless specified. | ||||||||
【Dimension (Unit:mm)】
【Wiring Diagram】
Fig.A DALI Dimming
Fig. B Push Dimming
【Derating】
【Dimming curve】
【Current gear setting】
| Series | KL26CC-PDii | ||||
| Current(mA) | DIP | Pomax(W) | Uout(V) | ||
| 1 | 2 | ||||
| 300 | - | - | 12.6 | 12～ | 42 |
| 350 | ON | - | 14.7 | 12～ | 42 |
| 500 | - | ON | 21 | 12～ | 42 |
| 600 | ON | ON | 25.2 | 12～ | 42 |
【ON/OFF & Description of Dimming Operation】
A. Short press the PUSH switch (short press time 0.1S-1S), the LED driver will turn on or off.
B. Dimming: Press and hold the PUSH switch (1S-8S), the LED driver can achieve dimming, brightening or dimming, the dimming range is 2-100%.
C. Memory: PUSH dimming has dimming memory function.
D. Dimming synchronization: The power connected to the same PUSH switch can be synchronized by pressing and holding the PUSH switch for longer than 15S
E. DALI dimming mode: Connect the power supply to the DALI system, and it can be dimmed by the DALI host. The dimming range is 0-100%.
【Attention】
1) The LED string must be connected to the load before turning on the input power, otherwise the LED string may be damaged.
