Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYL-M8607-000 / 223L0261 BELT TIMING Hitachi Smt Parts
| Part No | KYL-M8607-000/223L0261 |
| Part Name | BELT_TIMING |
| Condition | Compatible new / Original new |
| Material | Rubber |
| Usage | Hitachi machine |
| Type | HITACHI SMT part |
Hot sale stock list:
| WASHER | KYD-MC22H-00 |
| ASSY GRIP | KYD-MC21H-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| SPRING_COMP | KYD-MC3T-000 |
| PLATE | N610014970AE |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| SDD Hard Disk | N610059692AA |
| ASSY,LEVER | KYM-M8648-000 |
| GEAR | KYD-MC424-000/223E0481 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| PIN,HINGE | KYL-M860R-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| RT BELT | 3-212-264-01 |
| ASSY_CABLE | KYL-M86NC-000 |
| UNIT,I/O | KYL-M86LV-000 |
| VALVE | 4-187-212-01 |
| FEEDER CABLE | KYL-M869D-000 |
| SPRING_COMP | KYB-M91CS-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| BELT | 00334936S01 |
| SLIP RING | KYB-M7027-000 |
| COVER | KYM-M860X-000 |
| ARM STEEL | N210007284AB |
| LEVER | KYB-M3T01-000 |
| DSP-2008K SQUEEGE | L:20CM |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| NPM 235CS NOZZLE | N610043815AA |
| LEVER | KYB-M3T0M-000 |
| MOTOR | KYA-M700R-000 |
| SPRING_COMP | KYD-MC129-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| NPM 235C NOZZLE | N610043814AD |
| FUSE | KYL-M86KH-000 |
| POWER SUPPLY | 11632XA |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| B-234 NOZZLE | 47561103-B-234 |
| SENSOR,PELEC | KYK-M86DE-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| BELT_TIMING | KYA-M914W-000 |
| ROCK | 2-149-675-01 |
| SONY NOZZLE | CF25200 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| SONY NOZZEL AF12082 | AF12082 |
| BALL | 4-719-920-01 |
| TAIL PIVOT | P/N:0740C-0109 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| YG12F BELT | KHY-M9129-00 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| GREASE FOR PANASONIC | N510048188AA |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| WASHER | 92902-03100 |
| NOZZLE_HV13C | KYA-M7713-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| COVER(LB) | KYM-M8657-000 |
| NPM FILTER | N610097899AA |
| LEVER | KYK-M861V-000 |
| SEAL | KYB-M704E-000 |
| BLOCK | KYA-M7027-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| NOZZLE_SHAFT | KYF-M8619-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| KIC ON BOARD | 6-10 CHANEL |
| SLIP RING | KYB-M7027-000 |
| COVER(RB) | KYM-M8612-000 |
| NPM 226CS NOZZLE | N610040783AB |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| 234F NOZZLE | 45466931 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| NPM H16 SENSON | N510054833AA |
| COVER(RB) | KYD-MC10L-000 |
| VALVE | SY3120-MZD-C6-F2 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| BELT | 44548605 |
| LEVER | KYB-M3T22-000 |
| FILTER | K46-M8527-COX |
| GUIDE,LINEAR | LWHD12X3 |
| NOZZLE_HV14C | KYA-M7714-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| PIN,HINGE | KYD-MC41S-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| VALVE | 2-673-684-01 |
| Encoder Read Head For Universal | 49566101 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| GEAR | KYD-MC23C-00 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| ASSY_TENSION | KYD-MC21N-000 |
| BELT TIMING | KYA-M9152-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| NPM 230C NOZZLE | N610040784AD |
| WASHER | 90990-37J010 |
| DISK | KYB-M3T1A-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| LIGHTING_UNIT | KYB-M700T-000 |
| PIN_HINGE | KYD-MC42S-000 |
| PIPE FITTING | 630 048 4656 |
| GEAR | KYK-M864C-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| GT-24040B FEEDER | KYD-MCN00-00 |
| BOLT-HEX-SCT | 90990-01J115 |
| 935 NOZZLE | 00346524-03 |
| HELICAL SPRING | N210068065AA |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| I/O CABLE,WIDE | 0938A-1007 |
| P_RCG_SCOPE | KYB-M730B-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| Fuji Filter | AA1FZ04 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| NOZZLE(VC74) | KYK-M7725-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| GREASE | N990PANA-023 |
| Fuji Packing | PH00991 |
| PIN,LOCATE | KYD-MCN3N-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| NOZZLE | HG53G |
| 938 NOZZLE | 00322592-05 |
| 933 NOZZLE | 00346523-03 |
| GUIDE | KYD-MC11T-000 |
| BOTTON | ZB6-EB3B |
| NOZZLE_HV19C | KYA-M7719-000 |
| COUPLING | KYB-M7116-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| CPK JG0250 | CPK JG0250 |
| ASSY_GEAR | KYD-MC412-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| COUPLING | KYB-M702C-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| TOOL | N510031628AA |
| GREASE GUN KH-35 | KXF08V7AA00 |
| HNS,CORD | KYL-M8621-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| PIN_HINGE | KYD-MC41U-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| YG12 BELT | KHY-M9129-10 |
| CAM_FOLLOWER | KYA-M912N-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| CORD,BCR | KYF-M86NC-000 |
| LEVER | KYB-M3T21-000 |
| CASE-CONN | KYF-M860Y-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| PIN_LOCATE | KYD-MC137-000 |
| GEAR | KYD-MC153-00 |
| GERA(HASUBA) | KYD-MC131-000 |
| NPM H16 SHAFT | N510064335AA |
| SHROUDED POGO BLOCK | 0938A-0007 |
| SPRING | P/N:0730C-0252 |
| POWER SUPPLY | 1-474-020-11 |
| FUSH-SPECIAL | KYF-M860F-000 |
| NPM 185 NOZZLE | N610070338AB |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| 360F NOZZLE | 45466917 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| 340F NOZZLE | 45466934 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| SPRING COMP | KYD-MC13T-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| GEAR | KYD-MC20K-00 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| NOZZLE(HB04C) | KYB-M7721-100 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| PLATE | KYA-M3804-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| FFU | MX--575-A |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| SONY NOZZEL | AF10071 |
| NPM H8 SENSON | N510048691AA |
| GRIP | KYD-MC109-000 |
| BELT | N510021326AA |
| NPM 240C NOZZLE | N610062681AD |
| BM02 NOZZLE | BM02 |
| ASSY,GEAR | KYM-M862C-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| MICRO METER | 350-251-30 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| PIN-GAUGE | KXF00YHTA00 |
| HNS,LIGHTING | KYF-M861W-000 |
| SONY1000 FILTER | 4-761-920-01 |
| GXH SPECIAL NOZZLE | 13053 |
| CASE-CONN | KYK-M860Y-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| LEVER(SUP) | KYD-MC20D-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| ETC MOTOR | PK2K93S-2D |
| HV31 NOZZLE | KYL-M7718-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| COVER | KYK-M86RD-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| NPM X479 VALVE | N510054843AA |
| 937 NOZZLE | 00322591-06 |
| PCBA FIXTURE | FC150-130-60 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| GUIDE,LINEAR | KYK-M86LE-001 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| BELT | 6*3080*0.9 mm |
| 1220 NOZZLE | 51305323 |
| MOTOR_DC | KYD-MC410-000 |
| LEVER | KYK-M86LV-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| PIN-GAUGE | KXF00YHUA00 |
| COUPLING | KYK-M86AW-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| ASSY_GEAR | KYD-MC11A-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| PIN_LOCATE | KYD-MC132-000 |
| SPRING COMP | KYD-MC422-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| SENSOR-PELEC | KYK-M861Y-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| BELT | N510060977AA |
| TIMING BELT | KYB-M919E-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| COVER ASSY | X-4700-067-4 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| POGO BLOCK | 0738A-0029 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| LINE-SENSOR | KYF-M8607-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| SEAL | KYT-M862W-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| VALVE | SY3240-5LZD |
| SHAFT ASSY. | KYF-M864U-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| PIN,HINGE | KYB-M3T31-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| GUIDE,LINEAR | KYK-M860S-000 |
| WASHER | 92902-03200 |
| SENSOR | KYF-M8681-000 |
| LEVER | KYB-M3T33-000 |
| ASSY_LEVER | KYD-MC212-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| PCB-MOUNT | KYK-M861W-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| BLOCK L3 | KYB-M960C-000 |
| NPM 230CS NOZZLE | N610040788AD |
| 904 NOZZLE | Y074-V904-0015 |
| ASSY,SPROCKET | KYM-M862A-000 |
| GEAR | KYD-MC21U-000 |
| GEAR | KYU-M868B-000 |
| BLOCK | KYF-M867D-000 |
| DD MOTOR | KYF-M860E-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| FAN | 1204KL-04W-B59 |
| CYLINDER | KYL-M869A-000 |
| SPRING_COMP | KYD-MCN41-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| FEEDER | GD38080 |
| PIN_LOCATE | KYD-MC21Y-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| ROLLER(B) | KYK-M86EM-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| DRIVER | N510002593AA |
| COGNEX BOARD | KYK-M86PW-000 |
| BELT | N510065133AA |
| ASSY,LEVER | KYM-M864H-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| ASSY GEAR | KYD-MC211-000 |
| HOLDER | KYB-M701R-000 |
| GEAR | 4-719-921-02 |
| DEK SQUEEGE | DEK-03T 长25CM |
| UNIT,DRIVER | KYK-M860K-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| SEAL | KYB-M702B-000 |
| BELT | 6*3080*0.9 mm |
| NOZZLE(FF01) | KYB-M77F1-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
