Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYK-M86FH-000 / 6301273631 / 4M150293 MOTOR AC-SERVO Hitachi Smt Parts for GXH
| Part No | KYK-M86FH-000/6301273631/4M150293 |
| Part Name | MOTOR,AC-SERVO |
| Condition | Original new |
| Usage | Hitachi GXH machine |
| Type | SMT part |
Hot sale stock list:
| GEAR | KYD-MC153-00 |
| BRACKET | KYL-M86KD-000/211FC709 |
| SONY NOZZEL AF12082 | AF12082 |
| CASE-CONN | KYF-M860Y-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| LEVER | KYB-M3T01-000 |
| SLIP RING | KYB-M7027-000 |
| POGO BLOCK | 0738A-0029 |
| PIN,HINGE | KYL-M860R-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| SONY E1000 FILTER | 4-761-920-01 |
| DRIVER | N510002593AA |
| NOZZLE_HV13C | KYA-M7713-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| BELT | 00334936S01 |
| CORD,BCR | KYF-M86NC-000 |
| HOLDER | KYB-M701R-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| WASHER | 92902-03100 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| GERA(HASUBA) | KYD-MC131-000 |
| CASE-CONN | KYK-M860Y-000 |
| VALVE | SY3120-MZD-C6-F2 |
| GEAR | 4-719-921-02 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| SENSOR,PELEC | KYL-M8609-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| PIN_LOCATE | KYD-MC132-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NPM H16 SENSON | N510054833AA |
| Encoder Read Head For Universal | 49566101 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| GEAR | KYD-MC20K-00 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| ASSY_LEVER | KYD-MC212-000 |
| SPRING COMP | KYD-MC13T-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| NPM 226CS NOZZLE | N610040783AB |
| PULLEY_TIMING | KYB-M91AL-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| NPM 185 NOZZLE | N610070338AB |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| RT BELT | 3-212-264-01 |
| CAM FOLLOWER | KYB-M704A-000 |
| 234F NOZZLE | 45466931 |
| SDD Hard Disk | N610059692AA |
| SPRING_COMP | KYD-MC129-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| PLATE | N610014970AE |
| 340F NOZZLE | 45466934 |
| GEAR | KYD-MC23C-000/6301352305 |
| UNIT,I/O | KYL-M86LV-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| GUIDE,LINEAR | KYK-M860S-000 |
| COVER(RB) | KYD-MC10L-000 |
| SPRING_COMP | KYD-MCN41-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| SEAL | KYB-M704E-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| TOOL | N510031628AA |
| CYLINDER | KYL-M869A-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| HELICAL SPRING | N210068065AA |
| BELT TIMING | KYA-M9152-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| SPRING COMP | KYD-MC422-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| FAN | 1204KL-04W-B59 |
| ASSY,GEAR | KYM-M862C-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| DD MOTOR | KYF-M860E-000 |
| SENSOR | KYF-M8681-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| ACCESSORY,SV | KYL-M861C-000 |
| ROCK | 2-149-675-01 |
| LEVER | KYB-M3T21-000 |
| NPM X479 VALVE | N510054843AA |
| MOTOR | KYA-M700R-000 |
| LEVER | KYB-M3T22-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| BELT_TIMING | KYA-M914W-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| MOTOR_DC | KYD-MC410-000 |
| SEAL | KYB-M702B-000 |
| FFU | MX--575-A |
| Fuji Packing | PH00991 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| ETC MOTOR | PK2K93S-2D |
| ASSY_CABLE | KYL-M86NC-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| LEVER | KYB-M3T33-000 |
| SONY1000 FILTER | 4-761-920-01 |
| TAIL PIVOT | P/N:0740C-0109 |
| BOTTON | ZB6-EB3B |
| MACHINE SCREW | KYD-MC14G-000 |
| VALVE | 2-673-684-01 |
| PIN_LOCATE | KYD-MC137-000 |
| SLIP RING | KYB-M7027-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| BELT | 6*3080*0.9 mm |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| NPM 235CS NOZZLE | N610043815AA |
| GREASE | N990PANA-023 |
| NPM FILTER | N610097899AA |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| VALVE | SY3240-5LZD |
| NOZZLE | HG53G |
| CPK JG0250 | CPK JG0250 |
| YG12F BELT | KHY-M9129-00 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| SHAFT ASSY. | KYF-M864U-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| NPM H8 SENSON | N510048691AA |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| GXH SPECIAL NOZZLE | 13053 |
| NPM 235C NOZZLE | N610043814AD |
| VALVE | 4-187-212-01 |
| NPM 230C NOZZLE | N610040784AD |
| POWER SUPPLY | 1-474-020-11 |
| ASSY_SHAFT | KYF-M8651-000 |
| BLOCK L3 | KYB-M960C-000 |
| BALL | 4-719-920-01 |
| P_RCG_SCOPE | KYB-M730B-000 |
| ASSY GRIP | KYD-MC21H-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| NPM H16 SHAFT | N510064335AA |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| WASHER | KYD-MC22H-00 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| GREASE FOR PANASONIC | N510048188AA |
| Fuji Filter | AA1FZ04 |
| DEK SQUEEGE | DEK-03T 长25CM |
| BLOCK | KYF-M867D-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| PCBA FIXTURE | FC150-130-60 |
| SPRING_COMP | KYB-M91CS-000 |
| COVER | KYK-M86RD-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| ASSY_GEAR | KYD-MC11A-000 |
| 938 NOZZLE | 00322592-05 |
| NPM 230CS NOZZLE | N610040788AD |
| BOLT-HEX-SCT | 90990-01J115 |
| FEEDER CABLE | KYL-M869D-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| COUPLING | KYB-M7116-000 |
| WASHER | 92902-03200 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| LINE-SENSOR | KYF-M8607-000 |
| ASSY,LEVER | KYM-M8648-000 |
| PCB-MOUNT | KYK-M861W-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| SONY NOZZEL | AF10071 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| GEAR | KYD-MC23C-00 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| CAM_FOLLOWER | KYA-M912N-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| FUSE | KYL-M86KH-000 |
| 904 NOZZLE | Y074-V904-0015 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| ROLLER(B) | KYK-M86EM-000 |
| BELT | N510021326AA |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| BLOCK | KYL-M86KC-000/211G5472 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| LEVER | KYK-M861V-000 |
| MICRO METER | 350-251-30 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| COVER(RB) | KYM-M8612-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| ASSY_TENSION | KYD-MC21N-000 |
| COVER | KYM-M860X-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| NPM 240C NOZZLE | N610062681AD |
| SENSOR,PELEC | KYL-M86HL-000 |
| COVER ASSY | X-4700-067-4 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| DISK | KYB-M3T1A-000 |
| BLOCK | KYA-M7027-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| TIMING BELT | KYB-M919E-000 |
| FILTER | K46-M8527-COX |
| NOZZLE(FA05) | KYB-M77F5-000 |
| GEAR | KYD-MC424-000/223E0481 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| GT-24040B FEEDER | KYD-MCN00-00 |
| WASHER | 90990-37J010 |
| GEAR | KYU-M868B-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| SONY MOTHER BOARD | 1-797-651-12 |
| ARM STEEL | N210007284AB |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| PIN_HINGE | KYD-MC41U-000 |
| 933 NOZZLE | 00346523-03 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| 360F NOZZLE | 45466917 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| 937 NOZZLE | 00322591-06 |
| SPRING | P/N:0730C-0252 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| PIN-GAUGE | KXF00YHTA00 |
| 1220 NOZZLE | 51305323 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| YG12 BELT | KHY-M9129-10 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| COVER(LB) | KYM-M8657-000 |
| POWER SUPPLY | 11632XA |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| COUPLING | KYK-M86AW-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| SPRING_COMP | KYD-MC3T-000 |
| 935 NOZZLE | 00346524-03 |
| ASSY GEAR | KYD-MC211-000 |
| FEEDER | GD38080 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| PIN-GAUGE | KXF00YHUA00 |
| BELT | 44548605 |
| PIPE FITTING | 630 048 4656 |
| PIN,HINGE | KYD-MC41S-000 |
| BELT | N510065133AA |
| NOZZLE(HB04C) | KYB-M7721-100 |
| BM02 NOZZLE | BM02 |
| NOZZLE_HG33C | KYA-M7703-000 |
| ASSY,LEVER | KYM-M864H-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| PIN,HINGE | KYB-M3T31-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| GEAR | KYD-MC21U-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| PLATE | KYA-M3804-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| I/O CABLE,WIDE | 0938A-1007 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| KIC ON BOARD | 6-10 CHANEL |
| ASSY_GEAR | KYD-MC412-000 |
| HNS,CORD | KYL-M8621-000 |
| LEVER | KYB-M3T0M-000 |
| BELT | N510060977AA |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| PIN,LOCATE | KYD-MCN3N-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| DSP-2008K SQUEEGE | L:20CM |
| GUIDE,LINEAR | KYK-M86KY-000 |
| COUPLING | KYB-M702C-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| GUIDE | KYD-MC11T-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| LEVER(SUP) | KYD-MC20D-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| B-234 NOZZLE | 47561103-B-234 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| LEVER | KYK-M86LV-000 |
| PIN_HINGE | KYD-MC42S-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| SENSOR-PELEC | KYK-M861Y-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| SEAL | KYT-M862W-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| GRIP | KYD-MC109-000 |
| BELT | 6*3080*0.9 mm |
| GEAR | KYK-M864C-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| SONY NOZZLE | CF25200 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| GUIDE,LINEAR | LWHD12X3 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
