Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYA-M912N-000 / 1007A00S CAM FOLLOWER Hitachi Smt Spare Parts
| Part No | KYA-M912N-000/1007A00S |
| Part Name | CAM FOLLOWER |
| Condition | Compatible new / Original new |
| Material | Steel |
| Usage | Hitachi machine |
| Type | Hitachi Smt part |
Hot sale stock list:
| ASSY_GEAR | KYD-MC412-000 |
| CYLINDER | KYL-M869A-000 |
| ASSY GEAR | KYD-MC211-000 |
| SONY NOZZLE | CF25200 |
| WASHER | KYD-MC22H-00 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| DD MOTOR | KYF-M860E-000 |
| GEAR | 4-719-921-02 |
| BLOCK | KYA-M7027-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| GEAR | KYD-MC21U-000 |
| PIN_LOCATE | KYD-MC132-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| NOZZLE(VC74) | KYK-M7725-000 |
| NPM 235CS NOZZLE | N610043815AA |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| GEAR | KYK-M864C-000 |
| PCBA FIXTURE | FC150-130-60 |
| LEVER | KYB-M3T22-000 |
| BELT | N510060977AA |
| SPRING | P/N:0730C-0252 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| FEEDER CABLE | KYL-M869D-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| KIC ON BOARD | 6-10 CHANEL |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| COVER | KYM-M860X-000 |
| NPM X479 VALVE | N510054843AA |
| GREASE | N990PANA-023 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| GUIDE,LINEAR | LWHD12X3 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| 937 NOZZLE | 00322591-06 |
| BELT | N510065133AA |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| PIN,HINGE | KYB-M3T2Y-000 |
| PIN_LOCATE | KYD-MC137-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| HNS,LIGHTING | KYF-M861W-000 |
| BELT | 6*3080*0.9 mm |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| VALVE | SY3120-MZD-C6-F2 |
| SLIP RING | KYB-M7027-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| GUIDE | KYD-MC11T-000 |
| Encoder Read Head For Universal | 49566101 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| MOTOR | KYA-M700R-000 |
| UNIT,I/O | KYL-M86LV-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| PIN-GAUGE | KXF00YHUA00 |
| NPM 230C NOZZLE | N610040784AD |
| ASSY,LEVER | KYM-M8648-000 |
| SEAL | KYB-M702B-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| ROCK | 2-149-675-01 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| COVER(RB) | KYM-M8612-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| SENSOR-PELEC | KYK-M861Y-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| BLOCK | KYF-M867D-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| SEAL | KYT-M862W-000 |
| FUSE | KYL-M86KH-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| NPM 8mm FEEDER | KXFW1S5A00 |
| SEAL | KYB-M704E-000 |
| FFU | MX--575-A |
| MOTOR_DC | KYD-MC410-000 |
| NOZZLE | HG53G |
| NPM FILTER | N610097899AA |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| RT BELT | 3-212-264-01 |
| BELT | 44548605 |
| FEEDER | GD38080 |
| POGO BLOCK | 0738A-0029 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| COVER(LB) | KYM-M8657-000 |
| WASHER | 92902-03100 |
| BRACKET | KYL-M86KD-000/211FC709 |
| GREASE FOR PANASONIC | N510048188AA |
| SHAFT ASSY. | KYF-M864U-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| BELT | 00334936S01 |
| COGNEX BOARD | KYK-M86PW-000 |
| VALVE | 2-673-684-01 |
| BELT | N510021326AA |
| GXH SPECIAL NOZZLE | 13053 |
| UNIT-DRIVER | KYK-M861A-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| PIN_LOCATE | KYD-MC21Y-000 |
| YG12F BELT | KHY-M9129-00 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| SPRING COMP | KYD-MC13T-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| ASSY_GEAR | KYD-MC40F-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| ASSY,GEAR | KYM-M862C-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| UNIT_DRIVER | KYK-M860F-000 |
| HNS,CORD | KYL-M8621-000 |
| SONY1000 FILTER | 4-761-920-01 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| SPRING_COMP | KYB-M91CS-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| BM02 NOZZLE | BM02 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| AIR_LINE_EQPT | KYB-M704D-000 |
| 935 NOZZLE | 00346524-03 |
| COVER | KYK-M86RD-000 |
| BALL | 4-719-920-01 |
| ACCESSORY,SV | KYL-M861C-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| SONY NOZZEL AF12082 | AF12082 |
| CAM_FOLLOWER | KYA-M912N-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| SLIP RING | KYB-M7027-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| BELT | 6*3080*0.9 mm |
| NOZZLE(FF01) | KYB-M77F1-000 |
| ASSY_LEVER | KYD-MC212-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| LEVER | KYB-M3T21-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| SDD Hard Disk | N610059692AA |
| HOLDER | KYB-M702F-000/0916DK2D |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| BELT TIMING | KYA-M9152-000 |
| LEVER | KYB-M3T0M-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| COVER ASSY | X-4700-067-4 |
| HELICAL SPRING | N210068065AA |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| ROLLER(B) | KYK-M86EM-000 |
| NPM H16 SHAFT | N510064335AA |
| PULLEY_TIMING | KYB-M91AL-000 |
| NPM 240C NOZZLE | N610062681AD |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| PCB-MOUNT | KYK-M861W-000 |
| GEAR | KYD-MC20K-00 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| POWER SUPPLY | 11632XA |
| P_RCG_SCOPE | KYB-M730B-000 |
| LEVER | KYK-M86LV-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| MICRO METER | 350-251-30 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| LEVER(SUP) | KYD-MC20D-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| GEAR | KYD-MC153-00 |
| CPK JG0250 | CPK JG0250 |
| NPM 226CS NOZZLE | N610040783AB |
| VALVE | SY3240-5LZD |
| B-234 NOZZLE | 47561103-B-234 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| NOZZLE_HG52C | KYA-M7705-000 |
| NPM 185 NOZZLE | N610070338AB |
| COUPLING | KYK-M86AW-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| Fuji Filter | AA1FZ04 |
| GT38080 FEEDER | GT38080 FEEDER |
| BELT_TIMING | KYA-M914W-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| CORD,BCR | KYF-M86NC-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| SPRING_COMP | KYD-MCN41-000 |
| GEAR | KYD-MC23C-00 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| PLATE | N610014970AE |
| GUIDE,LINEAR | KYF-M867P-000 |
| COUPLING | KYB-M702C-000 |
| HOLDER | KYB-M701R-000 |
| PIN-GAUGE | KXF00YHTA00 |
| NOZZLE_HV14C | KYA-M7714-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| 234F NOZZLE | 45466931 |
| NOZZLE_HV13C | KYA-M7713-000 |
| 904 NOZZLE | Y074-V904-0015 |
| GEAR | KYD-MC424-000/223E0481 |
| ARM STEEL | N210007284AB |
| GXH-1 FILTER | KYL-M860S-000 |
| PIN,HINGE | KYD-MC41S-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| FILTER | K46-M8527-COX |
| POWER SUPPLY | 1-474-020-11 |
| LEVER | KYB-M3T01-000 |
| 360F NOZZLE | 45466917 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| Fuji Packing | PH00991 |
| SPRING_COMP | KYD-MC129-000 |
| PIN_HINGE | KYD-MC41U-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| PIN,HINGE | KYB-M3T31-000 |
| SPRING_COMP | KYD-MC3T-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| YG12 BELT | KHY-M9129-10 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| TOOL | N510031628AA |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| NOZZLE(WC01) | KYB-M77W1-100 |
| NOZZLE_HV19C | KYA-M7719-000 |
| NPM 235C NOZZLE | N610043814AD |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| NPM H16 SENSON | N510054833AA |
| GEAR | KYU-M868B-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| COUPLING | KYB-M7116-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| DSP-2008K SQUEEGE | L:20CM |
| ETC MOTOR | PK2K93S-2D |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| LEVER | KYB-M3T33-000 |
| CASE-CONN | KYF-M860Y-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| SENSOR | KYF-M8681-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| GUIDE,LINEAR | KYK-M860S-000 |
| WASHER | 92902-03200 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| 340F NOZZLE | 45466934 |
| SONY E1000 FILTER | 4-761-920-01 |
| GEAR | KYD-MC23C-000/6301352305 |
| PLATE | KYA-M3804-000 |
| NPM H8 SENSON | N510048691AA |
| NOZZLE(FA05) | KYB-M77F5-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| TIMING BELT | KYB-M919E-000 |
| FAN | 1204KL-04W-B59 |
| PIN,HINGE | KYL-M860R-000 |
| PIN_HINGE | KYD-MC42S-000 |
| NPM 230CS NOZZLE | N610040788AD |
| GRIP | KYD-MC109-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| 1220 NOZZLE | 51305323 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| ASSY GRIP | KYD-MC21H-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| 938 NOZZLE | 00322592-05 |
| ASSY,HOOK | KYD-MC40A-000 |
| VALVE | 4-187-212-01 |
| CAM FOLLOWER | KYB-M704A-000 |
| LEVER | KYK-M861V-000 |
| 933 NOZZLE | 00346523-03 |
| DISK | KYB-M3T1A-000 |
| DRIVER | N510002593AA |
| BOTTON | ZB6-EB3B |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| BUSH,BEARING | KYB-M3T3S-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| SONY NOZZEL | AF10071 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| SPRING COMP | KYD-MC422-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| LIGHTING_UNIT | KYB-M700T-000 |
| PIPE FITTING | 630 048 4656 |
| COVER(RB) | KYD-MC10L-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| ASSY,LEVER | KYM-M864H-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| CASE-CONN | KYK-M860Y-000 |
| LINE-SENSOR | KYF-M8607-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| WASHER | 90990-37J010 |
| BLOCK L3 | KYB-M960C-000 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
