Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYD-MC10H-000 / 1016B008 COVER(LA) Hitachi Smt Parts for Feeder Parts
| Part No | KYD-MC10H-000 / 1016B008 |
| Part Name | COVER(LA) |
| Condition | Compatible new |
| Material | steel |
| Usage | Hitachi machine |
| Type | SMT Feeder part |
Hot sale stock list:
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| PLATE | KYA-M3804-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| 360F NOZZLE | 45466917 |
| YG12 BELT | KHY-M9129-10 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| NOZZLE_HG33C | KYA-M7703-000 |
| GEAR | KYU-M868B-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| Encoder Read Head For Universal | 49566101 |
| NPM 240C NOZZLE | N610062681AD |
| RT BELT | 3-212-264-01 |
| DRIVER | N510002593AA |
| BELT | 6*3080*0.9 mm |
| 1220 NOZZLE | 51305323 |
| MICRO METER | 350-251-30 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| GXH SPECIAL NOZZLE | 13053 |
| NPM 235C NOZZLE | N610043814AD |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| NPM H8 SENSON | N510048691AA |
| 904 NOZZLE | Y074-V904-0015 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| NOZZLE(VC74) | KYK-M7725-000 |
| GRIP | KYD-MC109-000 |
| SPRING COMP | KYD-MC13T-000 |
| ASSY GRIP | KYD-MC21H-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| WASHER | 90990-37J010 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| SHROUDED POGO BLOCK | 0938A-0007 |
| BELT | N510065133AA |
| BOLT-HEX-SCT | 90990-01J115 |
| ASSY,GEAR | KYM-M862C-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| SONY1000 FILTER | 4-761-920-01 |
| 935 NOZZLE | 00346524-03 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| GUIDE | KYD-MC11T-000 |
| BELT | N510060977AA |
| TAIL PIVOT | P/N:0740C-0109 |
| BM02 NOZZLE | BM02 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| AIR_LINE_EQPT | KYB-M704D-000 |
| GREASE | N990PANA-023 |
| SEAL | KYT-M862W-000 |
| LINE-SENSOR | KYF-M8607-000 |
| CPK JG0250 | CPK JG0250 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| VALVE | 4-187-212-01 |
| ASSY_CABLE | KYL-M86NC-000 |
| SEAL | KYB-M704E-000 |
| PCB-MOUNT | KYK-M861W-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| COUPLING | KYB-M7116-000 |
| BELT | 6*3080*0.9 mm |
| COVER(RB) | KYD-MC10L-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| COVER(RB) | KYM-M8612-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| SPRING | P/N:0730C-0252 |
| LEVER | KYB-M3T0M-000 |
| SLIP RING | KYB-M7027-000 |
| FAN | 1204KL-04W-B59 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| PIN,HINGE | KYL-M860R-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| SENSOR,PELEC | KYK-M86DE-000 |
| NPM X479 VALVE | N510054843AA |
| ARM STEEL | N210007284AB |
| MOTOR_DC | KYD-MC410-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| LEVER | KYB-M3T01-000 |
| WASHER | KYD-MC22H-00 |
| NOZZLE | HG53G |
| LEVER | KYK-M86LV-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| PIN_LOCATE | KYD-MC137-000 |
| 937 NOZZLE | 00322591-06 |
| TOOL | N510031628AA |
| NOZZLE(HB03C) | KYB-M7720-100 |
| BLOCK | KYF-M867D-000 |
| COUPLING | KYK-M86AW-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| HELICAL SPRING | N210068065AA |
| HNS,LIGHTING | KYF-M861W-000 |
| NPM H16 SHAFT | N510064335AA |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| CYLINDER | KYL-M869A-000 |
| CASE-CONN | KYF-M860Y-000 |
| CORD,BCR | KYF-M86NC-000 |
| PIN,HINGE | KYB-M3T31-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| VALVE | SY3120-MZD-C6-F2 |
| GREASE FOR PANASONIC | N510048188AA |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| KIC ON BOARD | 6-10 CHANEL |
| 340F NOZZLE | 45466934 |
| PCBA FIXTURE | FC150-130-60 |
| SONY NOZZLE | CF25200 |
| PIN-GAUGE | KXF00YHTA00 |
| B-234 NOZZLE | 47561103-B-234 |
| SONY NOZZEL | AF10071 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| 234F NOZZLE | 45466931 |
| NOZZLE_HG82C | KYA-M7708-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| GEAR | KYD-MC23C-00 |
| SENSOR | KYF-M8681-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| SLIP RING | KYB-M7027-000 |
| COVER | KYM-M860X-000 |
| ASSY,LEVER | KYM-M8648-000 |
| DSP-2008K SQUEEGE | L:20CM |
| NOZZLE_SHAFT | KYF-M8619-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| 933 NOZZLE | 00346523-03 |
| SENSOR,PELEC | KYL-M86HL-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| LEVER | KYB-M3T22-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| GEAR | KYD-MC424-000/223E0481 |
| UNIT,I/O | KYL-M86LV-000 |
| BELT TIMING | KYA-M9152-000 |
| NPM 226CS NOZZLE | N610040783AB |
| VALVE | SY3240-5LZD |
| BUCK_UP_PIN | KYA-M3802-000 |
| NPM 230C NOZZLE | N610040784AD |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| GT38080 FEEDER | GT38080 FEEDER |
| NOZZLE(BA06) | KYB-M77A6-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| NPM 185 NOZZLE | N610070338AB |
| HOLDER | KYB-M701R-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| FEEDER CABLE | KYL-M869D-000 |
| MOTOR | KYA-M700R-000 |
| Fuji Filter | AA1FZ04 |
| PLATE | N610014970AE |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| ASSY_GEAR | KYD-MC412-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| BLOCK L3 | KYB-M960C-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| ASSY_GEAR | KYD-MC40F-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| LEVER | KYK-M861V-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| CAM FOLLOWER | KYB-M704A-000 |
| COVER ASSY | X-4700-067-4 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| FEEDER | GD38080 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| GEAR | KYD-MC20K-00 |
| PIPE FITTING | 630 048 4656 |
| FUSE | KYL-M86KH-000 |
| POWER SUPPLY | 11632XA |
| PIN,HINGE | KYD-MC41S-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| ASSY GEAR | KYD-MC211-000 |
| ROLLER(B) | KYK-M86EM-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| PIN-GAUGE | KXF00YHUA00 |
| GEAR | KYD-MC21U-000 |
| BELT_TIMING | KYA-M914W-000 |
| COUPLING | KYB-M702C-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| COGNEX BOARD | KYK-M86PW-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| COVER | KYK-M86RD-000 |
| DD MOTOR | KYF-M860E-000 |
| SDD Hard Disk | N610059692AA |
| SPRING COMP | KYD-MC422-000 |
| NPM H16 SENSON | N510054833AA |
| AIR_LINE_EQPT | KYB-M704D-000 |
| FILTER | K46-M8527-COX |
| VALVE | 2-673-684-01 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| SONY NOZZEL AF12082 | AF12082 |
| SPRING_COMP | KYB-M91CS-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| BALL | 4-719-920-01 |
| SHAFT ASSY. | KYF-M864U-000 |
| BELT | 44548605 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| TIMING BELT | KYB-M919E-000 |
| GUIDE,LINEAR | LWHD12X3 |
| ROCK | 2-149-675-01 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| ASSY,LEVER | KYM-M864H-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY_SHAFT | KYF-M8651-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| GEAR | KYD-MC23C-000/6301352305 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| LEVER | KYB-M3T21-000 |
| NPM 235CS NOZZLE | N610043815AA |
| HNS,CORD | KYL-M8621-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| WASHER | 92902-03200 |
| PIN,LOCATE | KYD-MCN3N-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| ETC MOTOR | PK2K93S-2D |
| UNIT-DRIVER | KYK-M861A-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| BLOCK | KYA-M7027-000 |
| GEAR | KYD-MC153-00 |
| NOZZLE_HV14C | KYA-M7714-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| BRACKET | KYL-M86KD-000/211FC709 |
| POGO BLOCK | 0738A-0029 |
| LEVER | KYB-M3T33-000 |
| BELT | N510021326AA |
| ASSY_LEVER | KYD-MC212-000 |
| COVER(LB) | KYM-M8657-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| Fuji Packing | PH00991 |
| ASSY_GEAR | KYD-MC11A-000 |
| POWER SUPPLY | 1-474-020-11 |
| SPRING_COMP | KYD-MC129-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| LIGHTING_UNIT | KYB-M700T-000 |
| GEAR | 4-719-921-02 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| PIN_HINGE | KYD-MC41U-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| NPM FILTER | N610097899AA |
| HOLDER | KYB-M702F-000/0916DK2D |
| HV31 NOZZLE | KYL-M7718-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| SEAL | KYB-M702B-000 |
| WASHER | 92902-03100 |
| PIN_LOCATE | KYD-MC21Y-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| NPM 230CS NOZZLE | N610040788AD |
| I/O CABLE,WIDE | 0938A-1007 |
| PIN_LOCATE | KYD-MC132-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| ASSY,HOOK | KYD-MC40A-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| SONY MOTHER BOARD | 1-797-651-12 |
| SPRING_COMP | KYD-MCN41-000 |
| DISK | KYB-M3T1A-000 |
| CASE-CONN | KYK-M860Y-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| YG12F BELT | KHY-M9129-00 |
| FFU | MX--575-A |
| SPRING_COMP | KYD-MC3T-000 |
| PIN_HINGE | KYD-MC42S-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| BOTTON | ZB6-EB3B |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| 938 NOZZLE | 00322592-05 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| GEAR | KYK-M864C-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| BELT | 00334936S01 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
