Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
6301264776 / 6301568607 / 223E0461 / KYK-M86E8-000 GEAR Hitachi Smt Spare Parts for Feeder
| Part No | 6301264776 / 6301568607 / 223E0461 / KYK-M86E8-000 |
| Part Name | Gear |
| Condition | Compatible new |
| Material | Brass |
| Usage | Feeder machine |
| Type | Hitachi Smt part |
Hot sale stock list:
| PIN,HINGE | KYD-MC41S-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| BELT | 00334936S01 |
| PLATE | N610014970AE |
| GXH SPECIAL NOZZLE | 13053 |
| COVER(RB) | KYD-MC10L-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| NPM FILTER | N610097899AA |
| SPRING_COMP | KYD-MC3T-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| MOTOR_DC | KYD-MC410-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| SONY NOZZLE | CF25200 |
| COVER | KYM-M860X-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| CORD,BCR | KYF-M86NC-000 |
| DISK | KYB-M3T1A-000 |
| POWER SUPPLY | 1-474-020-11 |
| PCBA FIXTURE | FC150-130-60 |
| FAN | 1204KL-04W-B59 |
| CAM FOLLOWER | KYB-M704A-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| UNIT,DRIVER | KYK-M860K-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| WASHER | 90990-37J010 |
| PIN,LOCATE | KYD-MCN3N-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| ASSY_TENSION | KYD-MC21N-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| SPRING_COMP | KYB-M91CS-000 |
| BELT | 44548605 |
| BELT | 6*3080*0.9 mm |
| SONY E1000 FILTER | 4-761-920-01 |
| SLIP RING | KYB-M7027-000 |
| ASSY,LEVER | KYM-M8648-000 |
| FUSE | KYL-M86KH-000 |
| SENSOR | KYF-M8681-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| VALVE | SY3240-5LZD |
| BLOCK L3 | KYB-M960C-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| ASSY_GEAR | KYD-MC412-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| BM02 NOZZLE | BM02 |
| SPRING_COMP | KYD-MC129-000 |
| PIN,HINGE | KYL-M860R-000 |
| PCB-MOUNT | KYK-M861W-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| LEVER | KYB-M3T01-000 |
| CASE-CONN | KYK-M860Y-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| PLATE | KYA-M3804-000 |
| TOOL | N510031628AA |
| POGO BLOCK | 0738A-0029 |
| GUIDE,LINEAR | LWHD12X3 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| TIMING BELT | KYB-M919E-000 |
| GREASE FOR PANASONIC | N510048188AA |
| UNIT-DRIVER | KYK-M861A-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| 234F NOZZLE | 45466931 |
| TAIL PIVOT | P/N:0740C-0109 |
| UNIT_DRIVER | KYK-M860F-000 |
| NPM X479 VALVE | N510054843AA |
| 933 NOZZLE | 00346523-03 |
| BELT | N510060977AA |
| BLOCK | KYA-M7027-000 |
| WASHER | 92902-03100 |
| NPM 230C NOZZLE | N610040784AD |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| NPM 185 NOZZLE | N610070338AB |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| GEAR | KYD-MC153-00 |
| BELT | N510021326AA |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| NOZZLE_HV19C | KYA-M7719-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| HNS,LIGHTING | KYF-M861W-000 |
| DD MOTOR | KYF-M860E-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| 938 NOZZLE | 00322592-05 |
| ASSY_SHAFT | KYF-M8651-000 |
| BELT TIMING | KYA-M9152-000 |
| NOZZLE | HG53G |
| LEVER | KYK-M861V-000 |
| PIN-GAUGE | KXF00YHUA00 |
| POWER SUPPLY | 11632XA |
| CASE-CONN | KYF-M860Y-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| ASSY GEAR | KYD-MC211-000 |
| Fuji Packing | PH00991 |
| ASSY,LEVER | KYM-M864H-000 |
| GEAR | KYD-MC20K-00 |
| COVER | KYK-M86RD-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| SEAL | KYT-M862W-000 |
| LEVER | KYB-M3T22-000 |
| FEEDER | GD38080 |
| NOZZLE_HV14C | KYA-M7714-000 |
| UNIT,I/O | KYL-M86LV-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| VALVE | 4-187-212-01 |
| 360F NOZZLE | 45466917 |
| SPRING COMP | KYD-MC13T-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| SPRING_COMP | KYD-MCN41-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| GEAR | KYD-MC424-000/223E0481 |
| NPM 235CS NOZZLE | N610043815AA |
| GEAR | KYD-MC21U-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| PIN-GAUGE | KXF00YHTA00 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| SEAL | KYB-M702B-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| ASSY_LEVER | KYD-MC212-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| ROCK | 2-149-675-01 |
| B-234 NOZZLE | 47561103-B-234 |
| VALVE | 2-673-684-01 |
| CPK JG0250 | CPK JG0250 |
| HNS,CORD | KYL-M8621-000 |
| GEAR | KYU-M868B-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| 340F NOZZLE | 45466934 |
| ASSY_GEAR | KYD-MC11A-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| NPM 230CS NOZZLE | N610040788AD |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| BELT_TIMING | KYA-M914W-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| MOTOR_DC | KYD-MCN2G-000 |
| COUPLING | KYK-M86AW-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| BELT | N510065133AA |
| SENSOR,PELEC | KYL-M86HL-000 |
| Encoder Read Head For Universal | 49566101 |
| NPM 235C NOZZLE | N610043814AD |
| SONY NOZZEL | AF10071 |
| ASSY,GEAR | KYM-M862C-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| NOZZLE_HG82C | KYA-M7708-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| CAM_FOLLOWER | KYA-M912N-000 |
| PIPE FITTING | 630 048 4656 |
| 935 NOZZLE | 00346524-03 |
| PIN,HINGE | KYB-M3T31-000 |
| 1220 NOZZLE | 51305323 |
| ACCESSORY,SV | KYL-M861C-000 |
| BLOCK | KYF-M867D-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| BALL | 4-719-920-01 |
| COVER(RB) | KYM-M8612-000 |
| PIN_LOCATE | KYD-MC132-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| SONY NOZZEL AF12082 | AF12082 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| PIN_LOCATE | KYD-MC137-000 |
| GEAR | 4-719-921-02 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| NPM H16 SENSON | N510054833AA |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| GRIP | KYD-MC109-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| 904 NOZZLE | Y074-V904-0015 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| RT BELT | 3-212-264-01 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| CYLINDER | KYL-M869A-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| SDD Hard Disk | N610059692AA |
| YG12F BELT | KHY-M9129-00 |
| YG12 BELT | KHY-M9129-10 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| NOZZLE(FA04) | KYB-M77F4-000 |
| PIN_HINGE | KYD-MC41U-000 |
| NPM H8 SENSON | N510048691AA |
| DRIVER | N510002593AA |
| NOZZLE(FA06) | KYB-M77F6-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| KIC ON BOARD | 6-10 CHANEL |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| MACHINE SCREW | KYD-MC14G-000 |
| ETC MOTOR | PK2K93S-2D |
| ASSY GRIP | KYD-MC21H-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| COVER ASSY | X-4700-067-4 |
| COUPLING | KYB-M702C-000 |
| SPRING COMP | KYD-MC422-000 |
| SLIP RING | KYB-M7027-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| BUSH,BEARING | KYB-M3T3S-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| NPM 226CS NOZZLE | N610040783AB |
| SEAL | KYB-M704E-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| SONY1000 FILTER | 4-761-920-01 |
| GT38080 FEEDER | GT38080 FEEDER |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| ASSY_CABLE | KYL-M86NC-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| PIN_HINGE | KYD-MC42S-000 |
| BOTTON | ZB6-EB3B |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| WASHER | 92902-03200 |
| GEAR | KYK-M864C-000 |
| SPRING | P/N:0730C-0252 |
| I/O CABLE,WIDE | 0938A-1007 |
| DSP-2008K SQUEEGE | L:20CM |
| GUIDE,LINEAR | KYK-M86KY-000 |
| GREASE | N990PANA-023 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| Fuji Filter | AA1FZ04 |
| FFU | MX--575-A |
| GREASE GUN KH-35 | KXF08V7AA00 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| WASHER | KYD-MC22H-00 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| GUIDE,LINEAR | KYK-M860S-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| NPM H16 SHAFT | N510064335AA |
| COVER(LB) | KYM-M8657-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ARM STEEL | N210007284AB |
| SENSOR,PELEC | KYK-M86DE-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| 937 NOZZLE | 00322591-06 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| LEVER(SUP) | KYD-MC20D-000 |
| LEVER | KYB-M3T21-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| FEEDER CABLE | KYL-M869D-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| LEVER | KYB-M3T0M-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| MICRO METER | 350-251-30 |
| ROLLER(B) | KYK-M86EM-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| SHAFT ASSY. | KYF-M864U-000 |
| LEVER | KYK-M86LV-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| NPM 240C NOZZLE | N610062681AD |
| BRACKET | KYL-M86KD-000/211FC709 |
| LEVER | KYB-M3T33-000 |
| MOTOR | KYA-M700R-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| VALVE | SY3120-MZD-C6-F2 |
| GEAR | KYD-MC23C-00 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| GXH-1 FILTER | KYL-M860S-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| GUIDE | KYD-MC11T-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| HV31 NOZZLE | KYL-M7718-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| LINE-SENSOR | KYF-M8607-000 |
| COUPLING | KYB-M7116-000 |
| HOLDER | KYB-M701R-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| HELICAL SPRING | N210068065AA |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| NOZZLE_HV13C | KYA-M7713-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| FILTER | K46-M8527-COX |
| BELT | 6*3080*0.9 mm |
| NOZZLE(VC74) | KYK-M7725-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
