Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
6301582757 / 010A0037 / KYM-M862F-000 ASSY BASE(R) Hitachi Smt Spare Parts for Feeder
| Part No | 6301582757 / 010A0037 / KYM-M862F-000 |
| Part Name | ASSY BASE(R) |
| Condition | Original news |
| Material | steel |
| Usage | Feeder Machine |
| Type | Hitachi SMT part |
Hot sale stock list:
| AIR_LINE_EQPT | KYB-M704D-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| PIN_HINGE | KYD-MC42S-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| WASHER | KYD-MC22H-00 |
| ASSY,SPROCKET | KYM-M862A-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| BELT | 6*3080*0.9 mm |
| TIMING BELT | KYB-M919E-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| PIN,LOCATE | KYD-MCN3N-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| WASHER | 92902-03200 |
| POGO BLOCK | 0738A-0029 |
| COVER | KYK-M86RD-000 |
| FUSE | KYL-M86KH-000 |
| BLOCK | KYF-M867D-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| SPRING_COMP | KYD-MCN41-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| COUPLING | KYB-M7116-000 |
| SONY1000 FILTER | 4-761-920-01 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| HELICAL SPRING | N210068065AA |
| ASSY,GEAR | KYM-M862C-000 |
| BELT | N510060977AA |
| ETC MOTOR | PK2K93S-2D |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| GUIDE | KYD-MC11T-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| NOZZLE_HG52C | KYA-M7705-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| 360F NOZZLE | 45466917 |
| LINE-SENSOR | KYF-M8607-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| ASSY_GEAR | KYD-MC40F-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| ASSY_GEAR | KYD-MC412-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| ASSY,LEVER | KYM-M864H-000 |
| LEVER | KYK-M861V-000 |
| PCBA FIXTURE | FC150-130-60 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| COVER(RB) | KYM-M8612-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| CASE-CONN | KYF-M860Y-000 |
| SEAL | KYB-M704E-000 |
| DSP-2008K SQUEEGE | L:20CM |
| NOZZLE | HG53G |
| GERA(HASUBA) | KYD-MC131-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| NOZZLE(WC01) | KYB-M77W1-100 |
| GEAR | 4-719-921-02 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| PIN_LOCATE | KYD-MC132-000 |
| 340F NOZZLE | 45466934 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| ASSY,LEVER | KYM-M8648-000 |
| LEVER | KYB-M3T21-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| CAM_FOLLOWER | KYA-M912N-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| PIN_LOCATE | KYD-MC137-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| SONY NOZZLE | CF25200 |
| ASSY_LEVER | KYD-MC212-000 |
| ARM STEEL | N210007284AB |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| LEVER | KYB-M3T0M-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| DRIVER | N510002593AA |
| NOZZLE_HG33C | KYA-M7703-000 |
| CPK JG0250 | CPK JG0250 |
| GREASE | N990PANA-023 |
| POWER SUPPLY | 1-474-020-11 |
| BRACKET | KYL-M86KD-000/211FC709 |
| GREASE FOR PANASONIC | N510048188AA |
| BELT | N510065133AA |
| NOZZLE(FA04) | KYB-M77F4-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| SDD Hard Disk | N610059692AA |
| NPM 230C NOZZLE | N610040784AD |
| RT BELT | 3-212-264-01 |
| PIN,HINGE | KYD-MC41S-000 |
| BELT | 44548605 |
| GUIDE,LINEAR | LWHD12X3 |
| MOTOR_DC | KYD-MCN2G-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| SPRING_COMP | KYD-MC3T-000 |
| SPRING COMP | KYD-MC13T-000 |
| SPRING | P/N:0730C-0252 |
| SEAL | KYT-M862W-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| ROCK | 2-149-675-01 |
| FUSH-SPECIAL | KYF-M860F-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| NPM 235CS NOZZLE | N610043815AA |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| UNIT,I/O | KYL-M86LV-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| SPRING COMP | KYD-MC422-000 |
| BELT | 00200341-01 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| GRIP | KYD-MC109-000 |
| LEVER | KYK-M86LV-000 |
| COVER(RB) | KYD-MC10L-000 |
| GEAR | KYD-MC424-000/223E0481 |
| GUIDE,LINEAR | KYF-M867P-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| SONY MOTHER BOARD | 1-797-651-12 |
| GXH SPECIAL NOZZLE | 13053 |
| FFU | MX--575-A |
| POWER SUPPLY | 11632XA |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| GEAR | KYD-MC21U-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| BALL | 4-719-920-01 |
| Fuji Filter | AA1FZ04 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| SENSOR,PELEC | KYL-M8609-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| COVER(MAK1-2) | KYD-MC11X-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| COVER ASSY | X-4700-067-4 |
| 937 NOZZLE | 00322591-06 |
| 1220 NOZZLE | 51305323 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| 904 NOZZLE | Y074-V904-0015 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| DEK SQUEEGE | DEK-03T 长25CM |
| SHROUDED POGO BLOCK | 0938A-0007 |
| NPM 185 NOZZLE | N610070338AB |
| PIN,HINGE | KYB-M3T2Y-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| YG12 BELT | KHY-M9129-10 |
| BLOCK L3 | KYB-M960C-000 |
| PCB-MOUNT | KYK-M861W-000 |
| NPM 230CS NOZZLE | N610040788AD |
| BLOCK | KYA-M7027-000 |
| BM02 NOZZLE | BM02 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| SENSOR-PELEC | KYK-M861Y-000 |
| TOOL | N510031628AA |
| BELT | 00334936S01 |
| VALVE | SY3120-MZD-C6-F2 |
| LEVER(SUP) | KYD-MC20D-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| UNIT_DRIVER | KYK-M860F-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| FILTER | K46-M8527-COX |
| GEAR | KYU-M868B-000 |
| COVER(LB) | KYM-M8657-000 |
| NPM X479 VALVE | N510054843AA |
| B-234 NOZZLE | 47561103-B-234 |
| 938 NOZZLE | 00322592-05 |
| BELT_TIMING | KYA-M914W-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| MOTOR | KYA-M700R-000 |
| ASSY GRIP | KYD-MC21H-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| BLOCK | KYL-M86KC-000/211G5472 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| PLATE | N610014970AE |
| GEAR | KYK-M864C-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| NPM 226CS NOZZLE | N610040783AB |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| BELT TIMING | KYA-M9152-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| SENSOR | KYF-M8681-000 |
| DISK | KYB-M3T1A-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| FAN | 1204KL-04W-B59 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| PIN_HINGE | KYD-MC41U-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| WASHER | 92902-03100 |
| PULLEY_TIMING | KYB-M91AL-000 |
| CORD,BCR | KYF-M86NC-000 |
| PIPE FITTING | 630 048 4656 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| COUPLING | KYB-M702C-000 |
| 933 NOZZLE | 00346523-03 |
| VALVE | 4-187-212-01 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| PLATE | KYA-M3804-000 |
| PIN,HINGE | KYL-M860R-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| BELT | 6*3080*0.9 mm |
| COVER(HIRA-1) | KYD-MC20X-000 |
| GEAR | KYD-MC23C-00 |
| WASHER | 90990-37J010 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| ROLLER(B) | KYK-M86EM-000 |
| COVER | KYM-M860X-000 |
| COUPLING | KYK-M86AW-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| GEAR | KYD-MC23C-000/6301352305 |
| LEVER | KYB-M3T22-000 |
| ASSY GEAR | KYD-MC211-000 |
| CASE-CONN | KYK-M860Y-000 |
| Encoder Read Head For Universal | 49566101 |
| NPM FILTER | N610097899AA |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| NPM H16 SHAFT | N510064335AA |
| ASSY_SHAFT | KYF-M8651-000 |
| HOLDER | KYB-M701R-000 |
| SONY NOZZEL | AF10071 |
| BOTTON | ZB6-EB3B |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| SONY NOZZEL AF12082 | AF12082 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| 935 NOZZLE | 00346524-03 |
| FEEDER CABLE | KYL-M869D-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| NPM H16 SENSON | N510054833AA |
| SPRING_COMP | KYD-MC129-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| NPM H8 SENSON | N510048691AA |
| BELT | N510021326AA |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| PIN-GAUGE | KXF00YHUA00 |
| LEVER | KYB-M3T01-000 |
| LEVER | KYB-M3T33-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| KIC ON BOARD | 6-10 CHANEL |
| SLIP RING | KYB-M7027-000 |
| SLIP RING | KYB-M7027-000 |
| SEAL | KYB-M702B-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| NPM 240C NOZZLE | N610062681AD |
| P_RCG_SCOPE | KYB-M730B-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| CYLINDER | KYL-M869A-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| VALVE | 2-673-684-01 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| MOTOR_DC | KYD-MC410-000 |
| Fuji Packing | PH00991 |
| ASSY_CABLE | KYL-M86NC-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| GEAR | KYD-MC153-00 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| BOLT-HEX-SCT | 90990-01J115 |
| NOZZLE_HV13C | KYA-M7713-000 |
| DD MOTOR | KYF-M860E-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| PIN-GAUGE | KXF00YHTA00 |
| HNS,CORD | KYL-M8621-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| FEEDER | GD38080 |
| MICRO METER | 350-251-30 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| PIN,HINGE | KYB-M3T31-000 |
| GEAR | KYD-MC20K-00 |
| VALVE | SY3240-5LZD |
| SPRING_COMP | KYB-M91CS-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| NPM 235C NOZZLE | N610043814AD |
| 234F NOZZLE | 45466931 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| YG12F BELT | KHY-M9129-00 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
