Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYL-M860J-000 / 6301251417 SPRING COMP Hitachi Smt Parts
| Part No | KYL-M860J-000 / 6301251417 |
| Part Name | SPRING |
| Condition | Original New or Copy New |
| Material | Steel |
| Usage | Hitachi GXH machine |
| Type | Hitachi Smt part |
Hot sale stock list:
| GEAR | KYD-MC21U-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| WASHER | 92902-03200 |
| ARM STEEL | N210007284AB |
| SLIP RING | KYB-M7027-000 |
| BELT | N510021326AA |
| NPM 230CS NOZZLE | N610040788AD |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| Encoder Read Head For Universal | 49566101 |
| BOLT-HEX-SCT | 90990-01J115 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| NOZZLE_HV13C | KYA-M7713-000 |
| BELT | N510065133AA |
| BOTTON | ZB6-EB3B |
| Fuji Filter | AA1FZ04 |
| SPRING COMP | KYD-MC422-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| GEAR | KYD-MC23C-000/6301352305 |
| YG12 BELT | KHY-M9129-10 |
| FAN | 1204KL-04W-B59 |
| ASSY GRIP | KYD-MC21H-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| ACCESSORY,SV | KYL-M861C-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| COUPLING | KYK-M86AW-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| COVER(LB) | KYM-M8657-000 |
| RT BELT | 3-212-264-01 |
| MOTOR | KYA-M700R-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| 234F NOZZLE | 45466931 |
| SENSOR | KYF-M8681-000 |
| FUSE | KYL-M86KH-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| HELICAL SPRING | N210068065AA |
| SEAL | KYB-M702B-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| NOZZLE(VC74) | KYK-M7725-000 |
| COVER | KYK-M86RD-000 |
| PCB-MOUNT | KYK-M861W-000 |
| COVER | KYM-M860X-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| CPK JG0250 | CPK JG0250 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| HOLDER | KYB-M701R-000 |
| NPM X479 VALVE | N510054843AA |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| NOZZLE | HG53G |
| FUSH-SPECIAL | KYF-M860F-000 |
| BELT | 6*3080*0.9 mm |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| MACHINE SCREW | KYD-MC14G-000 |
| PIN_HINGE | KYD-MC42S-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| VALVE | SY3120-MZD-C6-F2 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| SPRING_COMP | KYD-MCN41-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| BELT | 6*3080*0.9 mm |
| GEAR | KYD-MC20K-00 |
| FILTER | K46-M8527-COX |
| PIN,HINGE | KYD-MC41S-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| GREASE | N990PANA-023 |
| GUIDE | KYD-MC11T-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| LINE-SENSOR | KYF-M8607-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| COVER(RB) | KYD-MC10L-000 |
| NPM 235CS NOZZLE | N610043815AA |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| HNS,CORD | KYL-M8621-000 |
| 360F NOZZLE | 45466917 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| DSP-2008K SQUEEGE | L:20CM |
| SENSOR,PELEC | KYL-M8609-000 |
| KIC ON BOARD | 6-10 CHANEL |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| LEVER | KYB-M3T22-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| PLATE | N610014970AE |
| LEVER | KYK-M86LV-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| SLIP RING | KYB-M7027-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| NPM 185 NOZZLE | N610070338AB |
| COGNEX BOARD | KYK-M86PW-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| YG12F BELT | KHY-M9129-00 |
| PIN_LOCATE | KYD-MC132-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| GERA(HASUBA) | KYD-MC131-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| LEVER | KYB-M3T33-000 |
| NPM 230C NOZZLE | N610040784AD |
| GUIDE,LINEAR | KYK-M860S-000 |
| GEAR | KYU-M868B-000 |
| GXH SPECIAL NOZZLE | 13053 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| PIN,HINGE | KYB-M3T31-000 |
| COUPLING | KYB-M7116-000 |
| ASSY GEAR | KYD-MC211-000 |
| COUPLING | KYB-M702C-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| ASSY,GEAR | KYM-M862C-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| GEAR | KYK-M864C-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| SEAL | KYT-M862W-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| SPRING | P/N:0730C-0252 |
| 340F NOZZLE | 45466934 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| ROCK | 2-149-675-01 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| SONY NOZZLE | CF25200 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| NPM 240C NOZZLE | N610062681AD |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| ROLLER(B) | KYK-M86EM-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| BLOCK | KYF-M867D-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| NPM FILTER | N610097899AA |
| LEVER | KYK-M861V-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| 937 NOZZLE | 00322591-06 |
| BLOCK L3 | KYB-M960C-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| GEAR | 4-719-921-02 |
| WASHER | 92902-03100 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| DD MOTOR | KYF-M860E-000 |
| POGO BLOCK | 0738A-0029 |
| ASSY_LEVER | KYD-MC212-000 |
| SPRING_COMP | KYD-MC3T-000 |
| VALVE | 4-187-212-01 |
| ASSY_GEAR | KYD-MC412-000 |
| WASHER | 90990-37J010 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| WASHER | KYD-MC22H-00 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| PCBA FIXTURE | FC150-130-60 |
| SONY NOZZEL | AF10071 |
| SENSOR,PELEC | KYK-M86DE-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| SPRING_COMP | KYD-MC129-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| DEK SQUEEGE | DEK-03T 长25CM |
| COVER(RB) | KYM-M8612-000 |
| DRIVER | N510002593AA |
| NOZZLE_HV19C | KYA-M7719-000 |
| DISK | KYB-M3T1A-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| TIMING BELT | KYB-M919E-000 |
| SPRING COMP | KYD-MC13T-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| PIN,HINGE | KYL-M860R-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| BM02 NOZZLE | BM02 |
| NPM H16 SHAFT | N510064335AA |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| NOZZLE_HG52C | KYA-M7705-000 |
| SEAL | KYB-M704E-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| B-234 NOZZLE | 47561103-B-234 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| BELT TIMING | KYA-M9152-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| LEVER | KYB-M3T0M-000 |
| CYLINDER | KYL-M869A-000 |
| FFU | MX--575-A |
| CASE-CONN | KYK-M860Y-000 |
| POWER SUPPLY | 11632XA |
| 933 NOZZLE | 00346523-03 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| VALVE | SY3240-5LZD |
| BALL | 4-719-920-01 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| MOTOR_DC | KYD-MC410-000 |
| VALVE | 2-673-684-01 |
| POWER SUPPLY | 1-474-020-11 |
| SDD Hard Disk | N610059692AA |
| 938 NOZZLE | 00322592-05 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| TOOL | N510031628AA |
| NPM H8 SENSON | N510048691AA |
| NOZZLE(HB03C) | KYB-M7720-100 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| BELT | 44548605 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| GEAR | KYD-MC153-00 |
| GXH-1 FILTER | KYL-M860S-000 |
| GREASE FOR PANASONIC | N510048188AA |
| BELT | 00334936S01 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| PIPE FITTING | 630 048 4656 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| 904 NOZZLE | Y074-V904-0015 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| ASSY,LEVER | KYM-M864H-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| 935 NOZZLE | 00346524-03 |
| CASE-CONN | KYF-M860Y-000 |
| BELT | N510060977AA |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| NPM 235C NOZZLE | N610043814AD |
| BUSH,BEARING | KYB-M3T3R-000 |
| NPM H16 SENSON | N510054833AA |
| CORD,BCR | KYF-M86NC-000 |
| ASSY,LEVER | KYM-M8648-000 |
| PIN_HINGE | KYD-MC41U-000 |
| NPM 226CS NOZZLE | N610040783AB |
| AIR_LINE_EQPT | KYB-M704D-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| COVER ASSY | X-4700-067-4 |
| LEVER | KYB-M3T01-000 |
| ETC MOTOR | PK2K93S-2D |
| CAM_FOLLOWER | KYA-M912N-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| PIN-GAUGE | KXF00YHUA00 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| BLOCK | KYA-M7027-000 |
| GUIDE,LINEAR | LWHD12X3 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| Fuji Packing | PH00991 |
| FEEDER | GD38080 |
| ASSY,SPROCKET | KYM-M862A-000 |
| SPRING_COMP | KYB-M91CS-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| 1220 NOZZLE | 51305323 |
| SONY1000 FILTER | 4-761-920-01 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| NOZZLE_HG33C | KYA-M7703-000 |
| PLATE | KYA-M3804-000 |
| BELT_TIMING | KYA-M914W-000 |
| GEAR | KYD-MC424-000/223E0481 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| UNIT-DRIVER | KYK-M861A-000 |
| GEAR | KYD-MC23C-00 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| PIN-GAUGE | KXF00YHTA00 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| SONY NOZZEL AF12082 | AF12082 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| FEEDER CABLE | KYL-M869D-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| LEVER | KYB-M3T21-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| MICRO METER | 350-251-30 |
| PIN_LOCATE | KYD-MC137-000 |
| GRIP | KYD-MC109-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| UNIT,I/O | KYL-M86LV-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
